FPAttributeValueFile

n  SubType="IVI" 

n  SubVersion="1" 

v Current_Med_Fast_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  "Configures the DMM to calculate the range before each measurement "
  "automatically. "

 FL45_VAL_AUTO_RANGE_OFF (-2.00000000000000E+0)
  "Disables auto-ranging.  The DMM sets the range to the value it most "
  "recently calculated."

 0.03 (3.00000000000000E-2)
  ""

 0.1 (1.00000000000000E-1)
  ""

 10.0 (1.00000000000000E+1)
  ""


v Current_Slow_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  "Configures the DMM to calculate the range before each measurement "
  "automatically. "

 FL45_VAL_AUTO_RANGE_OFF (-2.00000000000000E+0)
  "Disables auto-ranging.  The DMM sets the range to the value it most "
  "recently calculated."

 0.01 (1.00000000000000E-2)
  ""

 0.1 (1.00000000000000E-1)
  ""

 10.0 (1.00000000000000E+1)
  ""


v DiodeCont_Med_Fast_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  ""


v DiodeCont_Slow_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  ""


v Freq_Slow_Med_Fast_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  "Configures the DMM to calculate the range before each measurement "
  "automatically. "

 FL45_VAL_AUTO_RANGE_OFF (-2.00000000000000E+0)
  "Disables auto-ranging.  The DMM sets the range to the value it most "
  "recently calculated."

 1000.0 (1.00000000000000E+3)
  ""

 10000.0 (1.00000000000000E+4)
  ""

 100000.0 (1.00000000000000E+5)
  ""

 1000000.0 (1.00000000000000E+6)
  ""

 10000000.0 (1.00000000000000E+7)
  ""


v VAC_Med_Fast_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  "Configures the DMM to calculate the range before each measurement "
  "automatically. "

 FL45_VAL_AUTO_RANGE_OFF (-2.00000000000000E+0)
  "Disables auto-ranging.  The DMM sets the range to the value it most "
  "recently calculated."

 0.3 (3.00000000000000E-1)
  ""

 3.0 (3.00000000000000E+0)
  ""

 30.0 (3.00000000000000E+1)
  ""

 300.0 (3.00000000000000E+2)
  ""

 750.0 (7.50000000000000E+2)
  ""


v VAC_Slow_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  "Configures the DMM to calculate the range before each measurement "
  "automatically. "

 FL45_VAL_AUTO_RANGE_OFF (-2.00000000000000E+0)
  "Disables auto-ranging.  The DMM sets the range to the value it most "
  "recently calculated."

 0.1 (1.00000000000000E-1)
  ""

 1.0 (1.00000000000000E+0)
  ""

 10.0 (1.00000000000000E+1)
  ""

 100.0 (1.00000000000000E+2)
  ""

 750.0 (7.50000000000000E+2)
  ""


v VDC_Med_Fast_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  "Configures the DMM to calculate the range before each measurement "
  "automatically. "

 FL45_VAL_AUTO_RANGE_OFF (-2.00000000000000E+0)
  "Disables auto-ranging.  The DMM sets the range to the value it most "
  "recently calculated."

 0.3 (3.00000000000000E-1)
  ""

 3.0 (3.00000000000000E+0)
  ""

 30.0 (3.00000000000000E+1)
  ""

 300.0 (3.00000000000000E+2)
  ""

 1000.0 (1.00000000000000E+3)
  ""


v VDC_Slow_RangeTable DataType="d" 
 FL45_VAL_AUTO_RANGE_ON (-1.00000000000000E+0)
  "Configures the DMM to calculate the range before each measurement "
  "automatically. "

 FL45_VAL_AUTO_RANGE_OFF (-2.00000000000000E+0)
  "Disables auto-ranging.  The DMM sets the range to the value it most "
  "recently calculated."

 0.1 (1.00000000000000E-1)
  ""

 1.0 (1.00000000000000E+0)
  ""

 10.0 (1.00000000000000E+1)
  ""

 100.0 (1.00000000000000E+2)
  ""

 1000.0 (1.00000000000000E+3)
  ""


v attrAcMaxFreq_Current1_Table DataType="d" 
 20000.0 (2.00000000000000E+4)
  ""


v attrAcMaxFreq_Current2_Table DataType="d" 
 2000.0 (2.00000000000000E+3)
  ""


v attrAcMaxFreq_Volts_Table DataType="d" 
 100000.0 (1.00000000000000E+5)
  ""


v attrAcMinFreq_Current1_Table DataType="d" 
 20.0 (2.00000000000000E+1)
  ""


v attrAcMinFreq_Current2_Table DataType="d" 
 20.0 (2.00000000000000E+1)
  ""


v attrAcMinFreq_Volts_Table DataType="d" 
 20.0 (2.00000000000000E+1)
  ""


v attrDbModeRangeTable DataType="i" 
 FL45_VAL_DB_OFF (0)
  "The DMM turns off the decibel modifiers."

 FL45_VAL_DB_NORMAL (1)
  "Enters the DMM into the normal decibels modifier.  Reading are  in "
  "decibels."

 FL45_VAL_DB_POWER (2)
  "Enters the DMM into the dB power modifier.  Readings  are in Watts.  The "
  "FL45_ATTR_DB_REF attribute must be set to 2, 4, 8, or 16 ohms for this "
  "value to be valid."


v attrDbRefRangeTable DataType="i" 
 FL45_VAL_2_OHMS (2)
  "2 ohms."

 FL45_VAL_4_OHMS (4)
  "4 ohms."

 FL45_VAL_8_OHMS (8)
  "8 ohms."

 FL45_VAL_16_OHMS (16)
  "16 ohms."

 FL45_VAL_50_OHMS (50)
  "50 ohms.  Not available in dB power mode."

 FL45_VAL_75_OHMS (75)
  "75 ohms.  Not available in dB power mode."

 FL45_VAL_93_OHMS (93)
  "93 ohms.  Not available in dB power mode."

 FL45_VAL_110_OHMS (110)
  "110 ohms.  Not available in dB power mode."

 FL45_VAL_124_OHMS (124)
  "124 ohms.  Not available in dB power mode."

 FL45_VAL_125_OHMS (125)
  "125 ohms.  Not available in dB power mode."

 FL45_VAL_135_OHMS (135)
  "135 ohms.  Not available in dB power mode."

 FL45_VAL_150_OHMS (150)
  "150 ohms.  Not available in dB power mode."

 FL45_VAL_250_OHMS (250)
  "250 ohms.  Not available in dB power mode."

 FL45_VAL_300_OHMS (300)
  "300 ohms.  Not available in dB power mode."

 FL45_VAL_500_OHMS (500)
  "500 ohms.  Not available in dB power mode."

 FL45_VAL_600_OHMS (600)
  "600 ohms.  Not available in dB power mode."

 FL45_VAL_800_OHMS (800)
  "800 ohms.  Not available in dB power mode."

 FL45_VAL_900_OHMS (900)
  "900 ohms.  Not available in dB power mode."

 FL45_VAL_1000_OHMS (1000)
  "1000 ohms.  Not available in dB power mode."

 FL45_VAL_1200_OHMS (1200)
  "1200 ohms.  Not available in dB power mode."

 FL45_VAL_8000_OHMS (8000)
  "8000 ohms.  Not available in dB power mode."


v attrFunctionRangeTable DataType="i" 
 FL45_VAL_DC_VOLTS (1)
  "DC Volts"

 FL45_VAL_AC_VOLTS (2)
  "AC Volts"

 FL45_VAL_DC_CURRENT (3)
  "DC Current"

 FL45_VAL_AC_CURRENT (4)
  "AC Current"

 FL45_VAL_2_WIRE_RES (5)
  "2 Wire Resistance"

 FL45_VAL_DIODE (102)
  "Diode"

 FL45_VAL_CONTINUITY (103)
  "Continuity"

 FL45_VAL_FREQ (104)
  "Frequency"

 FL45_VAL_AC_PLUS_DC_VOLTS (106)
  "AC + DC Volts"

 FL45_VAL_AC_PLUS_DC_CURRENT (107)
  "AC + DC Current"


v attrHoldThresholdRangeTable DataType="i" 
 FL45_VAL_HOLD_VERY_STABLE (0)
  "Very Stable Input (5% of range)."

 FL45_VAL_HOLD_STABLE (1)
  "Stable Input (7% of range)."

 FL45_VAL_HOLD_NOISY (2)
  "Noisy Input (8% of range)."


v attrMinMaxModeRangeTable DataType="i" 
 FL45_VAL_MIN_MAX_MODE_OFF (0)
  "Disables the min-max modifier."

 FL45_VAL_MIN_MODE (1)
  "Enables the min-max modifier and configures the DMM to return the minimum "
  "value."

 FL45_VAL_MAX_MODE (2)
  "Enables the min-max modifier and configures the DMM to return the maximum "
  "value."


v attrResolutionRangeTable DataType="d" 
 FL45_VAL_4_DIGITS (4.00000000000000E+0)
  "4 digits (20 readings/seconds)."

 FL45_VAL_5_DIGITS (5.00000000000000E+0)
  "5 digits (5 readings/seconds)."

 FL45_VAL_5_5_DIGITS (5.50000000000000E+0)
  "5-1/2 digits (2.5 reading/second)."


v attrSecondaryFunctionRangeTable DataType="i" 
 FL45_VAL_DC_VOLTS (1)
  "DC Volts"

 FL45_VAL_AC_VOLTS (2)
  "AC Volts"

 FL45_VAL_DC_CURRENT (3)
  "DC Current"

 FL45_VAL_AC_CURRENT (4)
  "AC Current"

 FL45_VAL_2_WIRE_RES (5)
  "2 Wire Resistance"

 FL45_VAL_DIODE (102)
  "Diode"

 FL45_VAL_FREQ (104)
  "Frequency"

 FL45_VAL_NONE (1001)
  "Secondary measurement function is disabled."


v attrTriggerSourceRangeTable DataType="i" 
 FL45_VAL_IMMEDIATE (1)
  "The DMM does not wait for a trigger of any kind."

 FL45_VAL_SW_TRIG_FUNC (3)
  "The DMM waits until you call the FL45_SendSWTrigger function."

 FL45_VAL_GPIB_GET (101)
  "The DMM waits until it receives a GPIB Group Execute Trigger (GET)."

 FL45_VAL_EXTERNAL (2)
  "The DMM waits for a trigger on the external trigger input.  This trigger "
  "source configures the receive pin (RX) of the RS-232 interface for use as "