Remote Control Mode-------------------In this mode RTP Proxy can be controlled from the remote machine overnetwork. When it is being used with SIP Express Router (SER), this allowsto force different paths for signalling (SIP) and media (RTP) streams.The mode can be activated by starting RTP Proxy with `-s' command lineargument:$ rtpproxy -s <proto>:<address>[:<port>]proto can be either udp or udp6; address is either IPv4 or IPv6 localaddress at which command commands should be accepted or `*' if rtpproxyshould accept commands at all local interfaces; port is UDP port,if omitted port 22222 is used.BEWARE: command protocol contains no security or auth measures, so thatyou should be using other means to secure RTP Proxy, such as firewall oreven better a VPN between machine runing RTP Proxy and machine wichruns a software that controls it.$Id: README.remote,v 1.1 2004/03/01 12:31:55 sobomax Exp $