VERSION 5.00
Begin VB.Form FormD5 
   BackColor       =   &H00FFFF80&
   Caption         =   "  修改密碼"
   ClientHeight    =   4875
   ClientLeft      =   3855
   ClientTop       =   2640
   ClientWidth     =   9705
   LinkTopic       =   "Form1"
   MaxButton       =   0   'False
   MinButton       =   0   'False
   Moveable        =   0   'False
   ScaleHeight     =   4875
   ScaleWidth      =   9705
   StartUpPosition =   2  '屏幕中心
   Begin VB.CommandButton Command2 
      Caption         =   "退 出"
      Height          =   320
      Left            =   4680
      TabIndex        =   3
      Top             =   2805
      Width           =   975
   End
   Begin VB.CommandButton Command1 
      Caption         =   "確 定"
      Height          =   320
      Left            =   3600
      TabIndex        =   2
      Top             =   2805
      Width           =   975
   End
   Begin VB.TextBox Text2 
      Height          =   270
      IMEMode         =   3  'DISABLE
      Left            =   4680
      PasswordChar    =   "*"
      TabIndex        =   1
      Text            =   "Text2"
      Top             =   1920
      Visible         =   0   'False
      Width           =   855
   End
   Begin VB.TextBox Text1 
      Height          =   270
      Left            =   4680
      TabIndex        =   0
      Text            =   "Text1"
      Top             =   1320
      Width           =   855
   End
   Begin VB.Label Label2 
      AutoSize        =   -1  'True
      BackColor       =   &H00FFFF80&
      Caption         =   "原 密 碼："
      Height          =   180
      Left            =   3720
      TabIndex        =   5
      Top             =   1980
      Visible         =   0   'False
      Width           =   900
   End
   Begin VB.Label Label1 
      AutoSize        =   -1  'True
      BackColor       =   &H00FFFF80&
      Caption         =   "用戶名稱："
      Height          =   180
      Left            =   3720
      TabIndex        =   4
      Top             =   1380
      Width           =   900
   End
End
Attribute VB_Name = "FormD5"
Attribute VB_GlobalNameSpace = False
Attribute VB_Creatable = False
Attribute VB_PredeclaredId = True
Attribute VB_Exposed = False

'     ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
'     ┃         Form65           修改密碼                      ┃
'     ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛

Option Explicit

'   Public strUsd, strUsm, strUsk, strUsj As String    ' 用戶名、密碼、級別及代碼
    
    Dim bytLgn As Byte, bolTc As Boolean
    Dim strUnk As String, strUsk As String, StrUsm As String, StrUsj As String, strUsd As String
'

Private Sub Form_Load()
       
    SetWindowPos Me.hwnd, -1, 0, 0, 0, 0, 3
        
    strT0 = "T_tm"
    If myF_ExistT(strT0) < 1 Then                               ' 檢查表 A_tm 記錄
       MsgBox "  Not Find " & strT0 & " ...  ", 48, " Error !"
       bolTc = True
       Exit Sub
    End If
    Set MyRs0 = New Recordset
    StrSQL = "Select * From " & strT0 & " Where Left(Dm,2)='Kl' Order By Xh"
    MyRs0.Open StrSQL, cnnTce, adOpenKeyset, adLockOptimistic
    If MyRs0.RecordCount > 0 Then
       MyRs0.MoveLast
    Else
       MsgBox "  Not Find Datas In " & strT0 & " ...  ", 48, " Error !!"
       bolTc = True
       Exit Sub
    End If
    
End Sub

Private Sub Form_Activate()
    If bolTc = True Then
       Unload Me
    End If
    strUnk = ""
    bytLgn = 3
    Text2.Text = ""
    Text1.Text = "": Text1.SetFocus
End Sub

Private Sub Text1_Change()                                     ' 檢查用戶名
    StrUsm = Trim(Text1.Text)
    If myF_Len(StrUsm) > 6 Then
       MsgBox "  用戶名最大長度為六個英文字符位，請修改 ... ", 48, "  請注意"
       Text1.Text = Left(StrUsm, 6)
       Text1.SetFocus                                          ' 重新輸入
    End If
End Sub

Private Sub Text1_KeyPress(KeyAscii As Integer)                ' 用戶名
    If KeyAscii = 13 Then
       StrUsm = Trim(Text1.Text)
       If StrUsm = "" Then
          StrUsj = "3"
          Command2.SetFocus                                    ' Quit
       Else
          If P_HcUse(StrUsm) = True Then                       ' 用戶名通過
             Call P_xxxx
          Else                                                 ' 用戶名未通過
             If bytLgn = 0 Then
                MsgBox "  很抱歉，用戶名不符 ...  ", 48, "  輸入錯誤 !!!"
                StrUsj = "3"
                Unload Me
                Exit Sub
             End If
          End If
       End If
    End If
End Sub

Function P_HcUse(Usn As String) As Boolean                     ' 核對用戶名
    MyRs0.MoveFirst
       If Usn = StrUsm Then
          P_HcUse = True
          Exit Function
       End If
    bytLgn = bytLgn - 1                                        ' 錯
    If bytLgn = 0 Then
       P_HcUse = False                                         ' 用戶名不符
    Else
       MsgBox "  請?jiān)佥斎胍淮斡脩裘?... ", 48, "  輸入錯誤 " & IIf(bytLgn = 1, "!!", "!")
       Text1 = ""
       P_HcUse = False
    End If
End Function

Private Sub P_xxxx()                                           ' 按名取記錄集合
    Set MyRs1 = New Recordset
    StrSQL = "Select * From " & strT0 & " Where Left(Dm,2)='Kl' And Mc='" & StrUsm & "'"
    MyRs1.Open StrSQL, cnnTce, adOpenKeyset, adLockOptimistic
       If MyRs1.RecordCount < 1 Then
          MsgBox "  Not Find Datas On " & StrUsm & " ...  ", 48, " Error !!!"
          StrUsj = "3"
          Unload Me
          Exit Sub
       End If
    bytLgn = 3
    Text1.Enabled = False
    Text2.Visible = True: Label2.Visible = True
    Text2.SetFocus
End Sub

Private Sub Text2_Change()                                     ' 檢查密碼
    strUsk = Trim(Text2.Text)
    If strUsk = "" Then Exit Sub
    If myF_Len(strUsk) > 6 Then
       MsgBox "  密碼最大長度為六個英文字符位，請修改 ... ", 48, "  請注意"
       Text2.Text = Left(strUsk, 6)
       Text2.SetFocus                                          ' 重新輸入
    End If
End Sub

Private Sub Text2_KeyPress(KeyAscii As Integer)                ' txtPassword
    If KeyAscii <> 13 Then Exit Sub
       strUsk = Trim(Text2.Text)
    If Label2.Caption Like "原*" Then
       If strUsk = "" Then
          Command2.SetFocus                                    ' Quit
       Else
          If P_HcKls(strUsk) = True Then                       ' 密碼通過
             Label2.Caption = "新 密 碼："
             Text2.Text = ""
             Text2.SetFocus
          Else                                                 ' 密碼未通過
             If bytLgn = 0 Then
                MsgBox "  很抱歉，密碼不符 ...  ", 48, "  輸入錯誤 !!!"
                StrUsj = "3"
                Unload Me
             End If
          End If
       End If
    Else                                                       ' 新密碼
       If strUsk = "" Then
          Command2.SetFocus                                    ' Quit
          Exit Sub
       End If
       If Label2.Caption Like "新*" Then
          strUnk = strUsk
          Label2.Caption = "再輸一次："
          Text2.Text = ""
          Text2.SetFocus
       Else
          If strUnk = strUsk Then                              ' 通過
             Command1.SetFocus
          Else
             MsgBox "  密碼修改失敗 ... ", 48, " Ok !"
             Unload Me
          End If
       End If
    End If
End Sub

Function P_HcKls(Usk As String) As Boolean                     ' 核對密碼
    MyRs1.MoveFirst
       Do While Not MyRs1.EOF
'MsgBox Usk & "-" & Trim(myRs0![Jc])
             If Usk = Trim(MyRs1![Jc]) Then
                strUsd = MyRs1![dm]
                StrUsm = MyRs1![Mc]
'                strUsj = Trim(myRs1![Bz])
                P_HcKls = True
                Exit Function
                Exit Do
             End If
             MyRs1.MoveNext
       Loop
    bytLgn = bytLgn - 1                                        ' 無
    If bytLgn = 0 Then
       P_HcKls = False                                         ' 密碼不符
    Else
       MsgBox "  請?jiān)佥斎胍淮蚊艽a ... ", 48, "  登錄錯誤 " & IIf(bytLgn = 1, "!!", "!")
       Text2 = ""
       P_HcKls = False
    End If
End Function

Private Sub Command1_KeyPress(KeyAscii As Integer)             ' cmdOK
    If KeyAscii = 13 Then Call Command1_Click
End Sub

Private Sub Command1_Click()                                   ' 確認處理
    
    StrUsm = Trim(Text1.Text)                                  ' 核對用戶名
       If StrUsm = "" Then
          Command2.SetFocus: Exit Sub                          ' Quit
       End If
    
    If P_HcUse(StrUsm) = False Then                            ' 未通過
       If bytLgn = 0 Then
          MsgBox "  很抱歉，用戶名不符 kk ...  ", 48, "  登錄錯誤 !!!"
          StrUsj = "3"
          Unload Me
       Else
          Text1.Text = ""
          Text1.SetFocus                                       ' 準備重新輸入
       End If
       Exit Sub
    End If
    
    If Text2.Visible = False Then
       Call P_xxxx                                             ' 按名取記錄集
       Exit Sub
    End If
    
    strUsk = Trim(Text2.Text)                                  ' 核對密碼
       If strUsk = "" Then
          Command2.SetFocus: Exit Sub                          ' Quit
       End If
    
    If Label2.Caption Like "原" Then
       If P_HcKls(strUsk) = False Then                         ' 未通過
          If bytLgn = 0 Then
             MsgBox "  很抱歉，密碼不符 ...  ", 48, "  登錄錯誤 !!!"
             StrUsj = "3"
             Unload Me
          Else
             Text2.Text = ""
             Text2.SetFocus                                    ' 重新輸入
          End If
          Exit Sub
       Else                                                    ' 密碼通過
          Label2.Caption = "新 密 碼："
          Text2.Text = ""
          Text2.SetFocus
       End If
    Else                                                       ' 新密碼
       If Label2.Caption Like "新" Then
          strUnk = strUsk
          Label2.Caption = "再輸一次："
       Else                                                    '
          If strUnk = strUsk Then
             MyRs1![Jc] = strUsk
             MyRs1.Update
             StrMsg = "完畢"
          Else
             StrMsg = "失敗"
          End If
          MsgBox "  密碼修改" & StrMsg & " ... ", 48, " Ok !"
          Unload Me
       End If
    End If

End Sub

Private Sub Command2_Click()                                   ' cmdCancel
    StrUsj = "3"
    Unload Me
End Sub

Private Sub Form_Unload(Cancel As Integer)
 On Error Resume Next
    MyRs0.Close: Set MyRs0 = Nothing
    MyRs1.Close: Set MyRs1 = Nothing
End Sub