//******************************************************************************
//   MSP-FET430P120 Demo - ADC10, DTC Sample A1-0 32x, AVcc, Repeat Seq, DCO
//
//  Description: Use DTC to sample A1/A0 repeat sequence 32x(64 total samples)
//  with reference to AVcc.  Software sets ADC10SC to trigger sample burst.
//  In Mainloop MSP430 waits in LPM0 to save power until ADC10 conversion
//  complete, ADC10_ISR will force exit from any LPMx in Mainloop on reti.
//  ADC10 internal oscillator times sample period (16x) and conversion (13x).
//  DTC transfers conversion code to RAM 200h - 280h.  ADC10(DTC) interrupt
//  will return system active. P1.0 set at start of conversion burst, reset
//  on completion.
//  //* MSP430F1232 or MSP430F1132 Device Required *//
//
//               MSP430F1232
//            -----------------
//        /|\|              XIN|-
//         | |                 |
//         --|RST          XOUT|-
//           |                 |
//       >---|A1           P1.0|-->LED
//       >---|A0
//
//  M. Buccini
//  Texas Instruments Inc.
//  Feb 2005
//  Built with IAR Embedded Workbench Version: 3.21A
//******************************************************************************

#include  <msp430x12x2.h>

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;                 // Stop WDT
  ADC10CTL1 = INCH_1 + CONSEQ_3;            // A1/A0, repeat multi channel
  ADC10CTL0 = ADC10SHT_2 + MSC + ADC10ON + ADC10IE;
  ADC10AE = 0x03;                           // P2.0,1 ADC option select
  ADC10DTC1 = 0x40;                         // 40 conversions
  P1DIR |= 0x01;                            // Set P1.0 output

  for (;;)
  {
    P1OUT |= 0x01;                          // Set P1.0 LED on
    ADC10CTL0 &= ~ENC;
    while (ADC10CTL1 & BUSY);               // Wait if ADC10 core is active
    ADC10SA = 0x200;                        // Data buffer start
    ADC10CTL0 |= ENC + ADC10SC;             // Sampling and conversion ready
    _BIS_SR(CPUOFF + GIE);                  // LPM0, ADC10_ISR will force exit
    P1OUT &= ~0x01;                         // Clear P1.0 LED off
  }
}

// ADC10 interrupt service routine
#pragma vector=ADC10_VECTOR
__interrupt void ADC10_ISR (void)
{
    _BIC_SR_IRQ(CPUOFF);                    // Clear CPUOFF bit from 0(SR)
}