#define temp		(*(volatile uint8_t *)(2))
#define trig 		(*(volatile uint8_t *)(3))					//觸發位，0為低電平觸發，1為高電平觸發
#define trig_en 	(*(volatile uint8_t *)(4))				//觸發忽略位，0為使能，1為忽略
#define fre_lo 		(*(volatile uint8_t *)(5))				//頻率時鐘低位
#define fre_hi 		(*(volatile uint8_t *)(6))				//頻率時鐘高位
//2us=0x0402;5us=0x0a02;
//10us=0x1402;20us=0x2802;50us=0x6402;
//100us=0xc802;200us=0x3203;500us=0x7d03;
//1ms=0xfa03;2ms=0x7d04;4ms=0xfa04;8ms=0x7d05;16ms=0xfa05
#define pre_trig 	(*(volatile uint8_t *)(7))				//預觸發位，由兩相等字節組成
#define mode 		(*(volatile uint8_t *)(8))					//工作模式
//0=普通模式；1=外部時鐘，上升延；2=外部時鐘，下降延；
//3=外部觸發，上升延；4=外部觸發，下降延；5=靜態模式；
//7、8、9為測試模式，7=二進制計數；8=AA 55；9=0。
#define sample_num	(*(volatile uint8_t *)(9))
#define addr		(*(volatile uint16_t *)(10))				//RAM地址
#define addr_lo		(*(volatile uint8_t *)(10))
#define addr_hi		(*(volatile uint8_t *)(11))
#define time_lo		(*(volatile uint8_t *)(12))
#define time_hi		(*(volatile uint8_t *)(13))
#define addr_trig	(*(volatile uint16_t *)(14))			//預觸發地址
#define addr_trig_lo	(*(volatile uint8_t *)(14))
#define addr_trig_hi	(*(volatile uint8_t *)(15))