?? calculator.fit
字號:
-- MAX+plus II Compiler Fit File
-- Version 10.0 9/14/2000
-- Compiled: 07/03/2007 21:06:25
-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "calculator"
BEGIN
DEVICE = "EP1K100QC208-3";
"CLK1" : INPUT_PIN = 94 ;
"CLK2" : INPUT_PIN = 95 ;
"CLK3" : INPUT_PIN = 96 ;
"INCLK" : INPUT_PIN = 183 ;
"INKEY0" : INPUT_PIN = 126 ;
"INKEY1" : INPUT_PIN = 127 ;
"INKEY2" : INPUT_PIN = 128 ;
"INKEY3" : INPUT_PIN = 131 ;
"ALARM" : OUTPUT_PIN = 143 ;
"COM10" : OUTPUT_PIN = 170 ;
"COM11" : OUTPUT_PIN = 172 ;
"COM12" : OUTPUT_PIN = 173 ;
"COM13" : OUTPUT_PIN = 174 ;
"COM20" : OUTPUT_PIN = 190 ;
"COM21" : OUTPUT_PIN = 191 ;
"COM22" : OUTPUT_PIN = 192 ;
"COM23" : OUTPUT_PIN = 193 ;
"OUTKEY0" : OUTPUT_PIN = 120 ;
"OUTKEY1" : OUTPUT_PIN = 121 ;
"OUTKEY2" : OUTPUT_PIN = 122 ;
"OUTKEY3" : OUTPUT_PIN = 125 ;
"SEG10" : OUTPUT_PIN = 175 ;
"SEG11" : OUTPUT_PIN = 176 ;
"SEG12" : OUTPUT_PIN = 177 ;
"SEG13" : OUTPUT_PIN = 179 ;
"SEG14" : OUTPUT_PIN = 180 ;
"SEG15" : OUTPUT_PIN = 186 ;
"SEG16" : OUTPUT_PIN = 187 ;
"SEG17" : OUTPUT_PIN = 189 ;
"SEG20" : OUTPUT_PIN = 195 ;
"SEG21" : OUTPUT_PIN = 196 ;
"SEG22" : OUTPUT_PIN = 197 ;
"SEG23" : OUTPUT_PIN = 198 ;
"SEG24" : OUTPUT_PIN = 199 ;
"SEG25" : OUTPUT_PIN = 200 ;
"SEG26" : OUTPUT_PIN = 202 ;
"SEG27" : OUTPUT_PIN = 203 ;
"|cal:1|bcdto2:7|add16:5|:99" : LOCATION = LC8_G33;
"|cal:1|bcdto2:7|add16:5|:106" : LOCATION = LC1_G33;
"|cal:1|bcdto2:7|add16:5|:110" : LOCATION = LC6_G33;
"|cal:1|bcdto2:7|add16:5|:114" : LOCATION = LC5_G43;
"|cal:1|bcdto2:7|add16:5|:116" : LOCATION = LC1_G43;
"|cal:1|bcdto2:7|add16:5|~116~1" : LOCATION = LC7_G47;
"|cal:1|bcdto2:7|add16:5|:121" : LOCATION = LC3_G42;
"|cal:1|bcdto2:7|add16:5|:124" : LOCATION = LC1_G42;
"|cal:1|bcdto2:7|add16:5|:130" : LOCATION = LC4_G42;
"|cal:1|bcdto2:7|add16:6|:105" : LOCATION = LC3_I52;
"|cal:1|bcdto2:7|add16:6|:107" : LOCATION = LC4_I52;
"|cal:1|bcdto2:7|add16:6|:112" : LOCATION = LC5_I33;
"|cal:1|bcdto2:7|add16:6|:116" : LOCATION = LC2_I33;
"|cal:1|bcdto2:7|add16:6|:118" : LOCATION = LC4_I40;
"|cal:1|bcdto2:7|add16:6|:122" : LOCATION = LC6_I40;
"|cal:1|bcdto2:7|add16:6|:126" : LOCATION = LC7_I40;
"|cal:1|bcdto2:7|add16:6|:128" : LOCATION = LC2_I40;
"|cal:1|bcdto2:7|add16:6|:132" : LOCATION = LC5_I45;
"|cal:1|bcdto2:7|add16:6|:134" : LOCATION = LC6_I45;
"|cal:1|bcdto2:7|add16:6|:136" : LOCATION = LC8_I45;
"|cal:1|bcdto2:7|add16:6|:139" : LOCATION = LC3_I45;
"|cal:1|bcdto2:7|add16:6|:145" : LOCATION = LC5_I30;
"|cal:1|bcdto2:7|add16:7|:111" : LOCATION = LC1_I33;
"|cal:1|bcdto2:7|add16:7|:118" : LOCATION = LC4_I33;
"|cal:1|bcdto2:7|add16:7|:122" : LOCATION = LC6_I33;
"|cal:1|bcdto2:7|add16:7|:124" : LOCATION = LC1_I40;
"|cal:1|bcdto2:7|add16:7|:128" : LOCATION = LC3_I40;
"|cal:1|bcdto2:7|add16:7|:130" : LOCATION = LC2_I45;
"|cal:1|bcdto2:7|add16:7|:134" : LOCATION = LC7_I45;
"|cal:1|bcdto2:7|add16:7|:136" : LOCATION = LC1_I45;
"|cal:1|bcdto2:7|add16:7|:140" : LOCATION = LC4_I45;
"|cal:1|bcdto2:7|add16:7|:142" : LOCATION = LC3_I30;
"|cal:1|bcdto2:7|add16:7|:146" : LOCATION = LC6_I30;
"|cal:1|bcdto2:7|add16:7|:148" : LOCATION = LC4_I30;
"|cal:1|bcdto2:7|add16:7|:151" : LOCATION = LC7_I30;
"|cal:1|bcdto2:7|add16:7|:152" : LOCATION = LC8_I30;
"|cal:1|bcdto2:7|add16:7|~152~1" : LOCATION = LC3_I37;
"|cal:1|bcdto2:7|add16:7|:154" : LOCATION = LC2_I30;
"|cal:1|bcdto2:7|add16:7|:158" : LOCATION = LC1_I30;
"|cal:1|bcdto2:7|add16:7|:160" : LOCATION = LC2_I51;
"|cal:1|bcdto2:7|add16:7|:163" : LOCATION = LC4_I51;
"|cal:1|bcdto2:7|add16:7|:166" : LOCATION = LC7_I51;
"|cal:1|bcdto2:7|add16:7|:172" : LOCATION = LC8_I51;
"|cal:1|bcdto2:7|BCDTOB1:1|:1075" : LOCATION = LC2_G43;
"|cal:1|bcdto2:7|BCDTOB1:1|:1108" : LOCATION = LC7_G33;
"|cal:1|bcdto2:7|BCDTOB1:1|:1141" : LOCATION = LC3_G33;
"|cal:1|bcdto2:7|BCDTOB1:1|:1174" : LOCATION = LC4_G7 ;
"|cal:1|bcdto2:7|BCDTOB2:2|~578~1" : LOCATION = LC4_G47;
"|cal:1|bcdto2:7|BCDTOB2:2|:662" : LOCATION = LC1_G47;
"|cal:1|bcdto2:7|BCDTOB2:2|~976~1" : LOCATION = LC2_G42;
"|cal:1|bcdto2:7|BCDTOB2:2|~976~2" : LOCATION = LC8_G47;
"|cal:1|bcdto2:7|BCDTOB2:2|~976~3" : LOCATION = LC6_G42;
"|cal:1|bcdto2:7|BCDTOB2:2|:995" : LOCATION = LC3_G47;
"|cal:1|bcdto2:7|BCDTOB2:2|:1033" : LOCATION = LC2_G47;
"|cal:1|bcdto2:7|BCDTOB2:2|:1042" : LOCATION = LC5_G42;
"|cal:1|bcdto2:7|BCDTOB2:2|~1042~1" : LOCATION = LC5_G47;
"|cal:1|bcdto2:7|BCDTOB2:2|:1070" : LOCATION = LC6_G47;
"|cal:1|bcdto2:7|BCDTOB2:2|:1108" : LOCATION = LC5_G33;
"|cal:1|bcdto2:7|BCDTOB2:2|:1141" : LOCATION = LC4_G33;
"|cal:1|bcdto2:7|BCDTOB3:3|:614" : LOCATION = LC5_I50;
"|cal:1|bcdto2:7|BCDTOB3:3|:626" : LOCATION = LC1_I50;
"|cal:1|bcdto2:7|BCDTOB3:3|:638" : LOCATION = LC3_I47;
"|cal:1|bcdto2:7|BCDTOB3:3|:650" : LOCATION = LC5_I47;
"|cal:1|bcdto2:7|BCDTOB3:3|:662" : LOCATION = LC6_I47;
"|cal:1|bcdto2:7|BCDTOB3:3|:674" : LOCATION = LC2_I47;
"|cal:1|bcdto2:7|BCDTOB3:3|~857~1" : LOCATION = LC7_I50;
"|cal:1|bcdto2:7|BCDTOB3:3|:877" : LOCATION = LC3_I50;
"|cal:1|bcdto2:7|BCDTOB3:3|~877~1" : LOCATION = LC2_I52;
"|cal:1|bcdto2:7|BCDTOB3:3|~877~2" : LOCATION = LC6_I50;
"|cal:1|bcdto2:7|BCDTOB3:3|:899" : LOCATION = LC1_I47;
"|cal:1|bcdto2:7|BCDTOB3:3|:910" : LOCATION = LC5_I52;
"|cal:1|bcdto2:7|BCDTOB3:3|:943" : LOCATION = LC8_I47;
"|cal:1|bcdto2:7|BCDTOB3:3|:976" : LOCATION = LC2_I50;
"|cal:1|bcdto2:7|BCDTOB3:3|:986" : LOCATION = LC4_I50;
"|cal:1|bcdto2:7|BCDTOB3:3|:1000" : LOCATION = LC7_I47;
"|cal:1|bcdto2:7|BCDTOB3:3|:1004" : LOCATION = LC1_I52;
"|cal:1|bcdto2:7|BCDTOB3:3|:1042" : LOCATION = LC5_I40;
"|cal:1|bcdto2:7|BCDTOB3:3|:1075" : LOCATION = LC3_I33;
"|cal:1|bcdto2:7|BCDTOB3:3|:1091" : LOCATION = LC4_I47;
"|cal:1|bcdto2:7|BCDTOB3:3|:1105" : LOCATION = LC6_I52;
"|cal:1|bcdto2:7|BCDTOB4:4|:566" : LOCATION = LC1_I51;
"|cal:1|bcdto2:7|BCDTOB4:4|:602" : LOCATION = LC8_I49;
"|cal:1|bcdto2:7|BCDTOB4:4|:650" : LOCATION = LC3_I49;
"|cal:1|bcdto2:7|BCDTOB4:4|:662" : LOCATION = LC3_I51;
"|cal:1|bcdto2:7|BCDTOB4:4|:674" : LOCATION = LC2_I37;
"|cal:1|bcdto2:7|BCDTOB4:4|:761" : LOCATION = LC2_I49;
"|cal:1|bcdto2:7|BCDTOB4:4|:778" : LOCATION = LC6_I51;
"|cal:1|bcdto2:7|BCDTOB4:4|~778~1" : LOCATION = LC5_I51;
"|cal:1|bcdto2:7|BCDTOB4:4|~799~1" : LOCATION = LC6_I49;
"|cal:1|bcdto2:7|BCDTOB4:4|~811~1" : LOCATION = LC1_I49;
"|cal:1|bcdto2:7|BCDTOB4:4|:824" : LOCATION = LC8_I37;
"|cal:1|bcdto2:7|BCDTOB4:4|:844" : LOCATION = LC7_I49;
"|cal:1|bcdto2:7|BCDTOB4:4|:910" : LOCATION = LC1_I37;
"|cal:1|bcdto2:7|BCDTOB4:4|:938" : LOCATION = LC4_I37;
"|cal:1|bcdto2:7|BCDTOB4:4|~970~1" : LOCATION = LC4_I49;
"|cal:1|bcdto2:7|BCDTOB4:4|:976" : LOCATION = LC5_I49;
"|cal:1|bcdto2:7|BCDTOB4:4|:1009" : LOCATION = LC5_I37;
"|cal:1|bcdto2:7|BCDTOB4:4|:1042" : LOCATION = LC7_I33;
"|cal:1|bcdto2:7|BCDTOB4:4|:1052" : LOCATION = LC7_I37;
"|cal:1|bcdto2:7|BCDTOB4:4|:1075" : LOCATION = LC6_I37;
"|cal:1|bcdto2:8|add16:5|:99" : LOCATION = LC3_G46;
"|cal:1|bcdto2:8|add16:5|:106" : LOCATION = LC5_G46;
"|cal:1|bcdto2:8|add16:5|:110" : LOCATION = LC2_G46;
"|cal:1|bcdto2:8|add16:5|:114" : LOCATION = LC2_G35;
"|cal:1|bcdto2:8|add16:5|:116" : LOCATION = LC5_G32;
"|cal:1|bcdto2:8|add16:5|~116~1" : LOCATION = LC8_G32;
"|cal:1|bcdto2:8|add16:5|:124" : LOCATION = LC6_G21;
"|cal:1|bcdto2:8|add16:5|:127" : LOCATION = LC5_G21;
"|cal:1|bcdto2:8|add16:5|:130" : LOCATION = LC4_G21;
"|cal:1|bcdto2:8|add16:6|:105" : LOCATION = LC1_G39;
"|cal:1|bcdto2:8|add16:6|:107" : LOCATION = LC3_G39;
"|cal:1|bcdto2:8|add16:6|:112" : LOCATION = LC2_G39;
"|cal:1|bcdto2:8|add16:6|:116" : LOCATION = LC4_G39;
"|cal:1|bcdto2:8|add16:6|:118" : LOCATION = LC4_G35;
"|cal:1|bcdto2:8|add16:6|:122" : LOCATION = LC3_G35;
"|cal:1|bcdto2:8|add16:6|:126" : LOCATION = LC6_G44;
"|cal:1|bcdto2:8|add16:6|:128" : LOCATION = LC4_G44;
"|cal:1|bcdto2:8|add16:6|~128~1" : LOCATION = LC1_G41;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -