/* * linux/arch/arm/mach-omap2/devices.c * * OMAP2 platform device setup/initialization * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */#include <linux/config.h>#include <linux/module.h>#include <linux/kernel.h>#include <linux/init.h>#include <linux/platform_device.h>#include <asm/hardware.h>#include <asm/io.h>#include <asm/mach-types.h>#include <asm/mach/map.h>#include <asm/arch/tc.h>#include <asm/arch/board.h>#include <asm/arch/mux.h>#include <asm/arch/gpio.h>extern void omap_nop_release(struct device *dev);/*-------------------------------------------------------------------------*/#if 	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)#define OMAP2_I2C_BASE2		0x48072000#define OMAP2_I2C_INT2		57static struct resource i2c_resources2[] = {	{		.start		= OMAP2_I2C_BASE2,		.end		= OMAP2_I2C_BASE2 + 0x3f,		.flags		= IORESOURCE_MEM,	},	{		.start		= OMAP2_I2C_INT2,		.flags		= IORESOURCE_IRQ,	},};static struct platform_device omap_i2c_device2 = {        .name           = "i2c_omap",        .id             = 2,        .dev = {                .release        = omap_nop_release,        },	.num_resources	= ARRAY_SIZE(i2c_resources2),	.resource	= i2c_resources2,};/* See also arch/arm/plat-omap/devices.c for first I2C on 24xx */static void omap_init_i2c(void){	/* REVISIT: Second I2C not in use on H4? */	if (machine_is_omap_h4())		return;	omap_cfg_reg(J15_24XX_I2C2_SCL);	omap_cfg_reg(H19_24XX_I2C2_SDA);	(void) platform_device_register(&omap_i2c_device2);}#elsestatic void omap_init_i2c(void) {}#endif/*-------------------------------------------------------------------------*/static int __init omap2_init_devices(void){	/* please keep these calls, and their implementations above,	 * in alphabetical order so they're easier to sort through.	 */	omap_init_i2c();	return 0;}arch_initcall(omap2_init_devices);