goto next_entry;	    }	}	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))	    link->conf.Vpp1 = link->conf.Vpp2 =		cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;	else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))	    link->conf.Vpp1 = link->conf.Vpp2 =		stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;	if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {	    cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;	    link->conf.ConfigIndex = cfg->index;	    link->io.BasePort1 = io->win[0].base;	    link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;	    if (!(io->flags & CISTPL_IO_16BIT))		link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;	    if (io->nwin == 2) {		link->io.NumPorts1 = 8;		link->io.BasePort2 = io->win[1].base;		link->io.NumPorts2 = (is_kme) ? 2 : 1;		if (pcmcia_request_io(link->handle, &link->io) != 0)			goto next_entry;		io_base = link->io.BasePort1;		ctl_base = link->io.BasePort2;	    } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {		link->io.NumPorts1 = io->win[0].len;		link->io.NumPorts2 = 0;		if (pcmcia_request_io(link->handle, &link->io) != 0)			goto next_entry;		io_base = link->io.BasePort1;		ctl_base = link->io.BasePort1 + 0x0e;	    } else goto next_entry;	    /* If we've got this far, we're done */	    break;	}    next_entry:	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)	    memcpy(&stk->dflt, cfg, sizeof(stk->dflt));	if (pass) {	    CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));	} else if (pcmcia_get_next_tuple(handle, &tuple) != 0) {	    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));	    memset(&stk->dflt, 0, sizeof(stk->dflt));	    pass++;	}    }    CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));    /* disable drive interrupts during IDE probe */    outb(0x02, ctl_base);    /* special setup for KXLC005 card */    if (is_kme)	outb(0x81, ctl_base+1);    /* retry registration in case device is still spinning up */    for (hd = -1, i = 0; i < 10; i++) {	hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, handle);	if (hd >= 0) break;	if (link->io.NumPorts1 == 0x20) {	    outb(0x02, ctl_base + 0x10);	    hd = idecs_register(io_base + 0x10, ctl_base + 0x10,				link->irq.AssignedIRQ, handle);	    if (hd >= 0) {		io_base += 0x10;		ctl_base += 0x10;		break;	    }	}	msleep(100);    }    if (hd < 0) {	printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"	       ", irq %u failed\n", io_base, ctl_base,	       link->irq.AssignedIRQ);	goto failed;    }    info->ndev = 1;    sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2));    info->node.major = ide_major[hd];    info->node.minor = 0;    info->hd = hd;    link->dev = &info->node;    printk(KERN_INFO "ide-cs: %s: Vcc = %d.%d, Vpp = %d.%d\n",	   info->node.dev_name, link->conf.Vcc / 10, link->conf.Vcc % 10,	   link->conf.Vpp1 / 10, link->conf.Vpp1 % 10);    link->state &= ~DEV_CONFIG_PENDING;    kfree(stk);    return;err_mem:    printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");    goto failed;cs_failed:    cs_error(link->handle, last_fn, last_ret);failed:    kfree(stk);    ide_release(link);    link->state &= ~DEV_CONFIG_PENDING;} /* ide_config *//*======================================================================    After a card is removed, ide_release() will unregister the net    device, and release the PCMCIA configuration.  If the device is    still open, this will be postponed until it is closed.    ======================================================================*/void ide_release(dev_link_t *link){    ide_info_t *info = link->priv;        DEBUG(0, "ide_release(0x%p)\n", link);    if (info->ndev) {	/* FIXME: if this fails we need to queue the cleanup somehow	   -- need to investigate the required PCMCIA magic */	ide_unregister(info->hd);    }    info->ndev = 0;    link->dev = NULL;        pcmcia_release_configuration(link->handle);    pcmcia_release_io(link->handle, &link->io);    pcmcia_release_irq(link->handle, &link->irq);        link->state &= ~DEV_CONFIG;} /* ide_release */static int ide_suspend(struct pcmcia_device *dev){	dev_link_t *link = dev_to_instance(dev);	link->state |= DEV_SUSPEND;	if (link->state & DEV_CONFIG)		pcmcia_release_configuration(link->handle);	return 0;}static int ide_resume(struct pcmcia_device *dev){	dev_link_t *link = dev_to_instance(dev);	link->state &= ~DEV_SUSPEND;	if (DEV_OK(link))		pcmcia_request_configuration(link->handle, &link->conf);	return 0;}/*======================================================================    The card status event handler.  Mostly, this schedules other    stuff to run after an event is received.  A CARD_REMOVAL event    also sets some flags to discourage the ide drivers from    talking to the ports.    ======================================================================*/static struct pcmcia_device_id ide_ids[] = {	PCMCIA_DEVICE_FUNC_ID(4),	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */ 	PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),	/* Hitachi */	PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),	PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),	/* Lexar */	PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),	PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),	PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),	PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),	PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),	PCMCIA_DEVICE_NULL,};MODULE_DEVICE_TABLE(pcmcia, ide_ids);static struct pcmcia_driver ide_cs_driver = {	.owner		= THIS_MODULE,	.drv		= {		.name	= "ide-cs",	},	.probe		= ide_attach,	.remove		= ide_detach,	.id_table       = ide_ids,	.suspend	= ide_suspend,	.resume		= ide_resume,};static int __init init_ide_cs(void){	return pcmcia_register_driver(&ide_cs_driver);}static void __exit exit_ide_cs(void){	pcmcia_unregister_driver(&ide_cs_driver);}late_initcall(init_ide_cs);module_exit(exit_ide_cs);