#define VERSION_STRING      "208-00A"   //portable use
#define PORTABLE_DVD
// 2004/12/16 yltseng, with this define enabled, osd color palettes are affected by brightness and
// contrast in setup menu
//#define OSD_COLOR_ADJUST_BY_BRIGHTNESS_AND_CONTRAST
//#define SOLVE_VBR_SVCD_FOR_STARLITE
//#define ENLARGE_SDRAM_CS_AND_OSD_SIZE

//---------------------
//IC settings
//---------------------


//---------------------
//board parts settings
//---------------------
//SDRAM settings(bus width, default is 16-bits mode)
//#define SDRAM_BUS_32BITS//portable use 16 bit//define it to use 32 bits SDRAM Bus width


#define DVD_SETUP_REENG
#define SETUP_CAN_DIRECT_SEL_SUBTITLE
#define SETUP_CAN_DIRECT_SEL_AUDIO_LANG


//#define SDRAM_16Mb_Mode       //only use 16Mb*1 SDRAM

//--------------------------------
// Define Disc detect polling time
//--------------------------------
#define DETECT_TIMES    0xff
#define NO_DISC_TIMES   30

/* ----------------------------------------------------------
CD-TEXT
Simon Lai 2006.6.29
---------------------------------------------------------- */   
//#define SUPPORT_CD_TEXT
#ifdef SUPPORT_CD_TEXT
    #define DISPLAY_CD_TEXT
    #define OSD_FONT_API
#endif

//-----------------------
// Video seting
//-----------------------
/*#define TV_YUV_OUT*/
#define S_VIDEO_OUT

//#define DIGITAL_VIDEO_OUT //Must Mask #define SDRAM_BUS_32BITS to use 16 bits SDRAM width 
//#define PNGPIO_CON_TFT

#ifdef DIGITAL_VIDEO_OUT
#define CCIR656_TYPE1       //CCIR656 Out from Pin225~233(8202A 256pin),Pin55~66(216pin)  
//#define CCIR656_TYPE2     //CCIR656 Out from Pin164~172,193(8202A 256pin) 
#endif

//#define SUPPORT_ETRON_EL8332_TCON

#ifdef SUPPORT_ETRON_EL8332_TCON
#define EL8332_AUO_A070FW_PANEL
#endif

/*
* ROM setting
*/
/*#define ROM_SDRAM_SHARE_BUS*/
/*#define ROM_ATA_SHARE_BUS*/

//#define VIRTUAL_KEYBOARD //WSLEE for virtual keyboard 20050518 AM10:30
#ifdef VIRTUAL_KEYBOARD
    #define VIRTUAL_KEYBOARD_16_COLOR
    
#endif
//#define OSD_SUPPORT_256_COLOR //now, virtual keyboard not use 256 color


//#define CUSTM_MENU_REVISE //WSLEE add this for static customer menu 20050525 PM3:00
#ifdef CUSTM_MENU_REVISE
    #define REGION_REMOVE 4
#endif

//CD-G related
#define SUPPORT_CDG                 //define it to support CD-G


#define TVOUT6_4DAC_ON//portable use
//#define SUNPLUS_8202P_DEMOBOARD


#ifdef TVOUT6_4DAC_ON
#define TV_USE_4_DAC
#endif

//#define TV_USE_4_DAC
//#define SCART_TV                  //define it if we support SCART TV, use GPIO-37-38-39 to control
//#define ORI_SCART_TV
//#define SCART_TV_2                //define pin151---SCART_DISPLAY; pin163---SCART_SIG  wanghaoying
//#define AUTO_ADJUST_TV_TYPE         //auto adjust tv type (16:9 ,4:3LB,4:3PS) from disc  //lijd 2004-9-15 13:25
//C/F Card setting
//#define SUPPORT_CARD_STORAGE      //Jeff 20020725
//#define CARD_MASTER                 //if you don't connect DVD-ROM, define SUPPORT_CARD_STORAGE+CARD_ONLY
//#define CARD_HOT_PLUG             //2002/11/8 kenny define for new reset(GPIO-17) scheme for card detect(GPIO-18)

//Upgrade setting
#define UPGRADE_FILE_NAME   {"DVDROM.BIN"}
//#define SUPPORT_UART_UPGRADE      //Upgrade flash via UART, Robert 020603
#define RESET_AFTER_UPGRADE         //reset 8200 and tray out after smart upgrade
//#define UPGRADE_TRAYOUT               //joshua 2004/07/13 tray out when dvdrom.bin have been moved to sdram

#ifndef SDRAM_16Mb_Mode
//#define SUPPORT_NESGAME
//#define DVD_AUDIO//portable use
#endif

#ifdef SUPPORT_NESGAME
//#define SUPPORT_IR_GAME
#define VFDKEYBUFADDR      0x588
#endif

//audio DAC settings, chose one
//6 channel audio DAC

#define WM8746I2S24               //(format:I2S24)//portable use

//#define WM8746                      //(format:RJ24)WM8766 is pin-2-pin compatible

//#define WM8736                    //for AUDIO DAC WM8736 or DA1196 6 chanell
//#define AV2188
//#define CS4228
//2 channel audio DAC
//#define WM8726RJ16
//#define WM8746I2S24
//#define WM8720                    //use GPIO-17 as AUDIO_RST
//#define CS4334DAC
//#define PCM1742
//#define PCM1606
//#define PCM1720
//#define PCM1723

//Audio channel connector(RCA connector)setting, Jeff 20020520
//We assign connectors to the following index, Lm(0), Rm(1), L(2), R(3), Ls(4), Rs(5), C(6), SFE(7)
//2-3-4-5-6-7 map to DAC OUT0L-OUT0R-OUT1L-OUT1R-OUT2L-OUT2R
#define DACOUTLm        8
#define DACOUTRm        9
#define DACOUT0L        0
#define DACOUT0R        1
#define DACOUT1L        2
#define DACOUT1R        3
#define DACOUT2L        4
#define DACOUT2R        5

#define DAC_INVERT      1           //dac polarity 0 (untouch) or 1 (inverted)


//#define SUPPORT_DSPMUTE        // benson add for dsp mute function 2004/07/12
#define CD_INIT_DNOT_MUTE


//#define CHECKPHONE                  ///yangli 2004-10-10,define it to check phone  in or out,when phone in audio output 5.1ch, and phone out audio output 2ch,yangli04-10-10

//IR setting
//#define IR200                        // for new SUNPLUS remote controller   2004-10-22 15:38, felix
#define IR44                        // for new SUNPLUS remote controller
//#define IR_GPS					// for new GPS_DVD project remote controller frank.huang2005-8-1 11:44

#define IR_PLAY_RESUME
#define IR_PLAY_RESUME_PAUSE
//#define SUPPORT_EX_IR

//#define HOLD_KEY_DETECT
//#define ADJUSTING_ACTION_VALID_RIGHT_NOW
//#define NEXT_FORWARD_IN_A_KEY
//#define IR5                         //"ircode_N700.h"
//======================================================================
//#define RISC_ALIVE_STANDBY        //power on by RISC on standby lijd  2004-9-28 17:33, 2004/10/01 yltseng
//======================================================================
#define IR_10_PLUS
//#define IR_NO_REPEAT              //disable repeat, when we keep to press one button, Jeff 20020924
//#define USE_VFD_LED_POWER         //use VFD LED to indicate power mode

//VFD setting
#define GENERAL_PANNEL              //for most 16312 VFD pannel.2-7-4 13:41
//#define GENERAL_HT1621_PANNEL              //for most HT1621 VFD pannel.2004-5-9 18:44 lijd
#ifdef GENERAL_HT1621_PANNEL
#define HT1621_PANNEL
#endif//GENERAL_HT1621_PANNEL
//#define AD7312_PANNEL              //2004-5-18 16:19 lijd
//#define CONSER_DVD288_PANNEL
//#define N701_PANNEL               //NINTAUS DVD-N701 PANNEL
//#define SM1623_DRIVER_VFD     //for SM1623 driver vfd      add 2003/10/11
//#define HC164_PANNEL
//#define GT1128_PANNEL         //for GT1128 driver 2004-7-21 11:13 lijd
//#define TP6317_PANNEL     //yaowh add for complete standby 04-10-25


//---------------------------------------------------------
//OSD language related settings(don't change the sequence)
//----------------------------------------------------------
#define USE_ENGLISH_OSD             //LCD_EN
//#define USE_SCHINESE_OSD            //LCD_ZH
//#define USE_TCHINESE_OSD            //LCD_ZH
#define USE_GERMAN_OSD              //LCD_DE
#define USE_SPANISH_OSD             //LCD_ES
#define USE_FRENCH_OSD              //LCD_FR