?? cfg_sunplus_cf_hdd_pmp.h
字號:
#define VERSION_STRING "HDP-000" //version: xxx-yyy, 20030422
#define PMP_DVD_ONE_DIR_SELECT //kenny add 2005/6/16
#define SUPPORT_UNICODE_FONT //kenny 2005/9/6
#define IC_8202D
//---------------------
//board parts settings
//---------------------
//SDRAM settings(bus width, default is 16-bits mode)
//#define SDRAM_BUS_32BITS//portable use 16 bit//define it to use 32 bits SDRAM Bus width
//#define SDRAM_16Mb_Mode //only use 16Mb*1 SDRAM
/*
* Define Disc detect polling time
*/
#define DETECT_TIMES 0xff
#define NO_DISC_TIMES 30
/*
* Video seting
*/
/*#define TV_YUV_OUT*/
#define S_VIDEO_OUT
//#define SUPPORT_Auo_2inch_Digital_panel
//#define SUPPORT_Auo_UPS053_Digital_panel //kenny add for auo 3.5" ccir656 panel
#define SUPPORT_TOPPOLY_UPS051_Digital_panel ///////yangli,2005-10-21 14:06
#ifdef SUPPORT_TOPPOLY_UPS051_Digital_panel
//#define TOPPOLY_36_PANEL
#define TOPPOLY_25_PANEL
#endif
//#define SUPPORT_Auo_UPS018_Digital_panel //yangli add for auo ups018
#ifdef SUPPORT_Auo_UPS018_Digital_panel
// #define SUPPORT_AN2526
//#define PNGPIO_CON_TFT
#endif
//#define SUPPORT_VX1818_TOSHIBA_PANEL
#define DIGITAL_VIDEO_OUT //Must Mask #define SDRAM_BUS_32BITS to use 16 bits SDRAM width
#ifdef DVDRELEASE //kenny 2005/8/15
//#undef DIGITAL_VIDEO_OUT
#endif
#ifdef DIGITAL_VIDEO_OUT //only for ccir656 //kenny 2005/5/20
#ifdef IC_8202D
#define CCIR601_TYPE1 //for 256 pin from pin 225~ pin233, and HSYNC,VHSYNC on pin 205,pin206
//#define CCIR656_TYPE1 //for 256 pin from pin 225~ pin233, and HSYNC,VHSYNC on pin 205,pin206
//#define CCIR656_TYPE3 //for 216 pin from pin 55~ pin66
#else
#define CCIR656_TYPE1 //CCIR656 Out from Pin225~233(8202A 256pin),Pin55~66(216pin)
//#define CCIR656_TYPE2 //CCIR656 Out from Pin164~172,193(8202A 256pin)
#endif //#ifdef IC_8202D
#endif
#ifdef IC_8202D //only 8202D has serial RGB //kenny 2005/5/20
//#define SERIAL_RGB //support Serial RGB
#ifdef SERIAL_RGB
//#define S_RGB_TYPE1 //for serial R,G,B from pin 55~ pin66
#define S_RGB_TYPE2 //for serial R,G,B from Pin225~233(8202A 256pin)
#endif
#ifdef S_RGB_TYPE1
#undef CCIR656_TYPE1
#endif
#ifdef S_RGB_TYPE2
#undef CCIR656_TYPE1
#undef CCIR601_TYPE1
#endif
#endif //IC_8202D
//#define PNGPIO_CON_TFT
/*
* ROM setting
*/
/*#define ROM_SDRAM_SHARE_BUS*/
/*#define ROM_ATA_SHARE_BUS*/
//#define CHECK_PORTABLE_OPCLSW
//CD-G related
#define SUPPORT_CDG //define it to support CD-G
#define TVOUT6_4DAC_ON//portable use
//#define SUNPLUS_8202P_DEMOBOARD
#ifdef TVOUT6_4DAC_ON
#define TV_USE_4_DAC
#endif
//#define TV_USE_4_DAC
//#define SCART_TV //define it if we support SCART TV, use GPIO-37-38-39 to control
//#define ORI_SCART_TV
//#define SCART_TV_2 //define pin151---SCART_DISPLAY; pin163---SCART_SIG wanghaoying
//Upgrade setting
#define UPGRADE_FILE_NAME {"DVDROM.BIN"}
#ifndef SDRAM_16Mb_Mode
//#define SUPPORT_NESGAME
//#define DVD_AUDIO
#endif
//audio DAC settings, chose one
//6 channel audio DAC
#ifdef SPHE8202
#define WM8746I2S24 //(format:I2S24)
#else
#define WM8746 //(format:RJ24)WM8766 is pin-2-pin compatible
#endif
//Audio channel connector(RCA connector)setting, Jeff 20020520
//We assign connectors to the following index, Lm(0), Rm(1), L(2), R(3), Ls(4), Rs(5), C(6), SFE(7)
//2-3-4-5-6-7 map to DAC OUT0L-OUT0R-OUT1L-OUT1R-OUT2L-OUT2R
#define DACOUTLm 0
#define DACOUTRm 1
#define DACOUT0L 2
#define DACOUT0R 3
#define DACOUT1L 4
#define DACOUT1R 5
#define DACOUT2L 6
#define DACOUT2R 7
#define DAC_INVERT 1 //dac polarity 0 (untouch) or 1 (inverted)
//#define USE_A19_AS_GPIO_MUTE
//IR setting
//#define IR44
#define IR200 // for new SUNPLUS remote controller
#define IR_PLAY_RESUME
#define IR_PLAY_RESUME_PAUSE
//#define HOLD_KEY_DETECT
//#define ADJUSTING_ACTION_VALID_RIGHT_NOW
//#define NEXT_FORWARD_IN_A_KEY
//#define IR5 //"ircode_N700.h"
#define IR_10_PLUS
//#define IR_NO_REPEAT //disable repeat, when we keep to press one button, Jeff 20020924
//#define USE_VFD_LED_POWER //use VFD LED to indicate power mode
//VFD setting
//#define PMP_MCU810 //for PMP communication with MCU810
#ifdef PMP_MCU810
#define MCU810_PANNEL
#undef SUPPORT_VFD_PANEL
#else
#undef SUPPORT_VFD
#endif
///OSD language related settings(don't change the sequence)
#define USE_ENGLISH_OSD //LCD_EN
//#define USE_SCHINESE_OSD //LCD_ZH
//#define USE_TCHINESE_OSD //LCD_ZH
#define USE_GERMAN_OSD //LCD_DE
#define USE_SPANISH_OSD //LCD_ES
#define USE_FRENCH_OSD //LCD_FR
#define USE_PORTUGUESE_OSD //LCD_PT
//#define USE_LATIN_OSD //LCD_LA
//#define USE_ITALIAN_OSD //LCD_IT
//#define USE_JAPANESE_OSD //LCD_JA
//#define USE_RUSSIAN_OSD //LCD_RU
//#define USE_ROMANIAN_OSD //LCD_RO
//#define USE_TURKISH_OSD //LCD_TR
//#define USE_DUTCH_OSD //LCD_NL
//#define USE_SWEDISH_OSD //LCD_SV
//#define USE_CZECH_OSD //LCD_CS
#define DEFAULT_OSD_LANG 0
#ifdef SDRAM_16Mb_Mode
#define N_OSD_LANGS 2
#define OSD_LAGN_SETUP_STRING LCD_EN,LCD_PT,0,0,0,0,0,0
#define OSD_LANG_SETUP_MAP {0, 1, 0, 0, 0, 0, 0, 0} //mapping table(OSD_LAGN_SETUP_STRING --> USE_XXX_OSD)
#else
#define N_OSD_LANGS 6//8//3
#define OSD_LAGN_SETUP_STRING LCD_EN,LCD_DE,LCD_ES,LCD_FR,LCD_PT,0,0,0
#define OSD_LANG_SETUP_MAP {0, 1, 2, 3, 4, 0, 0, 0} //mapping table(OSD_LAGN_SETUP_STRING --> USE_XXX_OSD)
#endif
#define OSD_TIMEOUT 200
#define OSD_SCREEN_SAVER
#define REGION_NUM 6 //set default region:0->all rigion;1~6->REGION 1~6.
#define SUPER_PASSWORD {IRC_5,IRC_1,IRC_6,IRC_8} //define super password when open tray
#define DEFAULT_PASSWORD 0000 //Jeff 20020703
#define USER_SUPER_PASSWORD 0000 //NONO 3-6-17 14:31
#define DEFAULT_AUDIO_LANG 2 //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:Lat
#define OSD_AUDIO_LAGN_SETUP_STRING LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_LA, LCD_DE
#define DEFAULT_SUBT_LANG 2 //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:off
#define OSD_SUBT_LAGN_SETUP_STRING LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_DE, STR_OS_OFF
#define DEFAULT_MENU_LANG 2 //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:Lat
#define OSD_MENU_LAGN_SETUP_STRING LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_DE, LCD_LA
#define DEFAULT_TV_SYS 0 //0:NTSC, 1:PAL60, 2:PAL, 3:AUTO
//#define TV_SYS_SETUP_STRING STR_OS_NTSC, STR_OS_PAL60, STR_OS_PAL, STR_OS_PALM, STR_OS_PALN, STR_OS_PALNc, STR_OS_AUTO, 0
#define TV_SYS_SETUP_STRING STR_OS_NTSC, STR_OS_PAL60, STR_OS_PAL, STR_OS_AUTO, 0, 0, 0
#ifdef TV_USE_4_DAC
#define MODE_MAX_PSCAN 0x04
#else
#define MODE_MAX_PSCAN 0x03
#endif
#if defined(TV_YUV_OUT)
#ifdef TV_USE_4_DAC
#define VIDEO_SETUP_STRING STR_OS_P_SCAN_YUV,STR_OS_YCbCr,STR_OS_TV_RGB, STR_OS_S_VIDEO, 0,0,0
#define VIDEO_SET_MODE P_SCAN, INTERLACE, TV_RGB, TV_SVIDEO
#else
#define VIDEO_SETUP_STRING STR_OS_P_SCAN_YUV,STR_OS_YCbCr,STR_OS_TV_RGB, 0, 0,0,0
#define VIDEO_SET_MODE P_SCAN, INTERLACE, TV_RGB
#endif
#elif defined(S_VIDEO_OUT)
#ifdef TV_USE_4_DAC
#define VIDEO_SETUP_STRING STR_OS_YCbCr,STR_OS_TV_RGB,STR_OS_P_SCAN_YUV,STR_OS_S_VIDEO, 0,0,0
#define VIDEO_SET_MODE INTERLACE, TV_RGB, P_SCAN, TV_SVIDEO
#else
#define VIDEO_SETUP_STRING STR_OS_YCbCr,STR_OS_TV_RGB,STR_OS_P_SCAN_YUV,0, 0,0,0
#define VIDEO_SET_MODE INTERLACE, TV_RGB, P_SCAN,
#endif
#endif
#define SETUP_ALL_VALID //define it to let SETUP MENU is always valid, Jeff 20021023
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -