//--------------------------------------
//Modefied by wangfeng,2003-08-29 15:18
//For new setup menu
//--------------------------------------


//
// DEFINITIONS
//
// #1
// *SDRAM_16Mb_Mode
//  define this to compress memory into 1x16Mb SDRAM configuration
//
// *SDRAM_32Mb_Mode
// *SDRAM_64Mb_Mode
//  for 4MB and 8MB systems
//
// #2
// *SDRAM_32BITS
//  define this for 32-bit SDRAM interface. without this definition,
//  firmware will configure the SDRAM controller to use 16-bit SDRAM
//  interface.
//
// #3
// *DVD_AUDIO
//  define this to support DVD-audio related functions.
//
//


#define VERSION_STRING      "STD-000"   //version: xxx-yyy, 20030422

//---------------------
//board parts settings
//---------------------
//#define SDRAM_16Mb_Mode       // only use 16Mb*1 SDRAM
#define SDRAM_32Mb_Mode         // with 4MB memory
//#define SDRAM_64Mb_Mode       // with 8MB memory


//SDRAM settings(bus width, default is 16-bits mode)
#ifndef SDRAM_16Mb_Mode
#define SDRAM_BUS_32BITS        // define it to use 32 bits SDRAM Bus width
#endif


//#define AUTO_PLAY				// VCD/DVD auto play when tray-in

#ifdef AUTO_PLAY
#define DVD_SEQ_PLAY
#endif

/*
* Define Disc detect polling time
*/
#define DETECT_TIMES	0xff
#define NO_DISC_TIMES	30

/*
*  Video seting
*/
/*#define TV_YUV_OUT*/
#define S_VIDEO_OUT

//#define DIGITAL_VIDEO_OUT //Must Mask #define SDRAM_BUS_32BITS to use 16 bits SDRAM width
#ifdef DIGITAL_VIDEO_OUT
#define CCIR656_TYPE1		//CCIR656 Out from Pin225~233(8202A 256pin),Pin55~66(216pin)  
//#define CCIR656_TYPE2		//CCIR656 Out from Pin164~172,193(8202A 256pin) 
#endif

/*
* ROM setting
*/
/*#define ROM_SDRAM_SHARE_BUS*/

//CD-G related
#define SUPPORT_CDG                 //define it to support CD-G

//#define TVOUT6_4DAC_ON
#ifdef TVOUT6_4DAC_ON
#define TV_USE_4_DAC
#endif

//#define TV_USE_4_DAC
//#define SCART_TV                  //define it if we support SCART TV, use GPIO-37-38-39 to control
//#define ORI_SCART_TV
//#define SCART_TV_2				//define pin151---SCART_DISPLAY; pin163---SCART_SIG  wanghaoying
//#define AUTO_ADJUST_TV_TYPE         //auto adjust tv type (16:9 ,4:3LB,4:3PS) from disc  //lijd 2004-9-15 13:25
//Upgrade setting
#define UPGRADE_FILE_NAME	{"DVDROM.BIN"}

//#define OLD_I2C_DEFINE        //define it to use GPIO-35/36 for I2C, otherwise, GPIO-0/1

#ifndef SDRAM_16Mb_Mode
//#define SUPPORT_NESGAME
//#define DVD_AUDIO
#endif

#ifdef  SUPPORT_NESGAME   //for VFD pannel key valid in PLAY game state  2004-7-2 15:18 lijd
//#define SUPPORT_IR_GAME
#define VFDKEYBUFADDR      0x588
#endif

//audio DAC settings, chose one
//we prefer using audio DAC hardware config
#define USE_DAC_RJ24        //(default setting)
//#define USE_DAC_I2S24
//#define USE_DAC_RJ16
//#define USE_DAC_I2S16
//#define USE_DAC_LJ24
//#define USE_DAC_LJ16

//only PCM1742 use software config
//#define PCM1742

//legacy audio DAC settings
//#define WM8746                      //(format:RJ24)WM8766 is pin-2-pin compatible
//#define WM8746I2S24               //(format:I2S24)
//#define WM8736                    //for AUDIO DAC WM8736 or DA1196 6 chanell
//#define AV2188
//#define CS4228
//#define CE2746                    //for AUDIO DAC CE2746  6 chanell     
//2 channel audio DAC
//#define WM8726RJ16
//#define WM8746I2S24
//#define WM8720                    //use GPIO-17 as AUDIO_RST
//#define CS4334DAC
//#define PCM1742
//#define PCM1606
//#define PCM1720
//#define PCM1723

//Audio channel connector(RCA connector)setting, Jeff 20020520
//We assign connectors to the following index, Lm(0), Rm(1), L(2), R(3), Ls(4), Rs(5), C(6), SFE(7)
//2-3-4-5-6-7 map to DAC OUT0L-OUT0R-OUT1L-OUT1R-OUT2L-OUT2R
#define DACOUTLm        0
#define DACOUTRm        1
#define DACOUT0L        2
#define DACOUT0R        3
#define DACOUT1L        4
#define DACOUT1R        5
#define DACOUT2L        6
#define DACOUT2R        7

#define DAC_INVERT      1           //dac polarity 0 (untouch) or 1 (inverted)

//#define USE_A19_AS_GPIO_MUTE

//IR setting

#define IR44                        // for new SUNPLUS remote controller
#define IR_PLAY_RESUME
#define IR_PLAY_RESUME_PAUSE

//#define ADJUSTING_ACTION_VALID_RIGHT_NOW
//#define NEXT_FORWARD_IN_A_KEY
//#define IR5                         //"ircode_N700.h"


#define IR_10_PLUS
//#define IR_NO_REPEAT              //disable repeat, when we keep to press one button, Jeff 20020924
//#define USE_VFD_LED_POWER         //use VFD LED to indicate power mode

//VFD setting
#define GENERAL_PANNEL              //for most 16312 VFD pannel.2-7-4 13:41
//#define GENERAL_HT1621_PANNEL              //for most HT1621 VFD pannel.2004-5-9 18:44 lijd
#ifdef GENERAL_HT1621_PANNEL
#define HT1621_PANNEL
#endif//GENERAL_HT1621_PANNEL
//#define AD7312_PANNEL              //2004-5-18 16:20 lijd
//#define TP6311_DRIVER_VFD  //for GBM dvd receiver  //xyy 2003-11-6 10:13
//#define CONSER_DVD288_PANNEL
//#define N701_PANNEL               //NINTAUS DVD-N701 PANNEL

//#define PROVIEW_GPIO_KEY	//ref. gpio.c --- bruce add 2003/2/14 11:35AM
				//define  ---- for DVD288K2(GPIO KEY)
				//not define - for DVD288K (VFD KEY)
//#define SM1623_DRIVER_VFD  	//for SM1623 driver vfd      add 2003/10/11
//#define HC164_PANNEL

#ifdef PROVIEW_GPIO_KEY

#undef SUPPORT_VFD

#define LED_HIGH_LIGHT  //define it to use 720 GPIO HIGH to turn-on LED light, else LOW to turn-on LED light

#if 0//def PROVIEW_GPIO_KEY
#define DVD_LED_GPIO	11
#define CD_LED_GPIO		7
#define MP3_LED_GPIO	6
#define NEXT_KEY_GPIO		16
#define PREV_KEY_GPIO		4
#define STOP_KEY_GPIO		17
#define PAUSEPLAY_KEY_GPIO	18
#define EJECT_KEY_GPIO		5

#else

#define GPIO_40 40
#define GPIO_54 54
#define GPIO_63 63

#define DVD_LED_GPIO	GPIO_54				//VFD CLK
#define CD_LED_GPIO		55					//VFD STB
#define MP3_LED_GPIO	56					//VFD DAT
#define NEXT_KEY_GPIO		43				//GAME CLK
#define PREV_KEY_GPIO		39//GPIO_63		//SCART SIG
#define STOP_KEY_GPIO		42				//GAME LAT
#define PAUSEPLAY_KEY_GPIO	41				//GAME D0
#define EJECT_KEY_GPIO		GPIO_40			//GAME D1

#endif

#endif// PROVIEW_GPIO_KEY

//#define DRAW_BLACK_FRAME //WANGAP

#ifdef SDRAM_16Mb_Mode	// alan, 2003/10/14 01:21