?? agdi.h
字號(hào):
#ifndef __AGDI__INCED___
#define __AGDI__INCED___
#ifdef __cplusplus
extern "C" {
#endif
#include <Windows.h> // wg. HWND, RECT, CALLBACK, HANDLE
#define _EXPO_ __declspec(dllexport)
/*
* Advanced GDI types
*/
typedef unsigned long UL32;
typedef signed long SL32;
typedef signed char SC8;
typedef unsigned char UC8;
typedef signed int I32;
typedef unsigned int U32;
typedef signed short int I16;
typedef unsigned short int U16;
typedef __int64 I64;
typedef unsigned __int64 U64;
typedef float F32;
typedef double F64;
typedef union {
U32 u32; // 32-Bit signed int
I32 i32; // 32-Bit unsigned int
UL32 ul; // 32-Bit unsigned long
SL32 sl; // 32-Bit signed long
UC8 uc; // 8-Bit unsigned char
SC8 sc; // 8-Bit signed char
U16 u16; // 16-Bit unsigned short int
I16 i16; // 16-Bit signed short int
U64 u64; // 64-Bit unsigned int
I64 i64; // 64-Bit signed int
F32 f32; // 32-Bit single precision float
F64 f64; // 64-Bit single precision float
UL32 ul2 [2];
SL32 sl2 [2];
U16 u16a [4];
I16 i16a [4];
UC8 uc8 [8];
SC8 sc8 [8];
SC8 *pS;
UC8 *pU;
U16 *pW;
U32 *pD;
} GVAL;
/*
* 166/167 specific's
*/
#define mWREG 0x100 // 0x100...0x10F := R0...R15
#define mBREG 0x200 // 0x200...0x20F := RL0...RH7
#define mDREG 0x300 // not used.
#define mDPP 0x400 // 0x400...0x403 := DPP0...DPP3
#define mPC 0x500 // PC
#define mPSW 0x600 // PSW
#define mSP 0x700 // SP
#define mCP 0x800 // CP
#define mCYC 0x900 // Cycles value
#pragma pack(1)
typedef struct {
union {
U16 wregs [16]; // R0 ... R15
UC8 bregs [16]; // RL0 ... RH7
} r;
U32 Ndpp[4]; // full linear base address values
U32 nPC; // full address !
U16 cPsw; // current Psw
U16 cSP;
U16 cMDL; // MDL
U16 cMDH; // MDH
U32 cCP; // CP
I64 nCycles; // cycle counter (or time ???)
} RG166;
/*
* Sle66+ specific's
*/
#define nnR0 0x00 // R0
#define nnR1 0x01 // R1
#define nnR2 0x02 // R2
#define nnR3 0x03 // R3
#define nnR4 0x04 // R4
#define nnR5 0x05 // R5
#define nnR6 0x06 // R6
#define nnR7 0x07 // R7
//#define niR0 0x10 // @R0
//#define niR1 0x11 // @R1
//#define nrAB 0x12 // AB
#define nrCY 0x13 // C
#define nrA 0x14 // A
#define nrDPTR 0x18 // DPTR
#define nnPR0 0x1C // PR0 (80C51MX)
#define nnPR1 0x1D // PR1 (80C51MX)
typedef struct { // iMCS51 - SLE66Cxx Registers
UL32 nPC;
I64 nCycles; // cycle counter
UC8 psw;
UC8 sp;
UC8 b;
UC8 acc;
UC8 dpl;
UC8 dph;
UC8 bregs [8];
UC8 dpsel;
UC8 adrxh; // page for MOVX @Ri
U16 dptx [8]; // DPTR save area
} RGSLE66;
typedef struct { // iMCS51-Registers
BYTE Rn [16]; // R0 ... R7
DWORD nPC; // full address !
BYTE sp; // SP
BYTE psw; // PSW-sfr
BYTE b; // B-sfr
BYTE acc; // ACC-sfr
BYTE dpl; // DPL-sfr
BYTE dph; // DPH-sfr
BYTE ports[8];
I64 nCycles; // cycle counter
} RG51;
#pragma pack()
#pragma pack(1)
#define RGROUP struct rGroup
#define RITEM struct rItem
#define REGDSC struct RegDsc
struct rGroup { // Register Group Descriptor
UC8 desc; // always 0x00
UC8 ShEx; // 1:=Show Group expanded
char *name; // Group name
};
struct rItem { // Register Item Descriptor
UC8 desc; // always 0x01
U16 nGi; // Group-Index (0...nGroups-1)
U16 nItem; // Item indicator
char szReg[16]; // Name of Register
UC8 isPC; // is this the PC
UC8 canChg; // can this Reg be changed in Reg-Window
UC8 iHigh; // highlight the value
UC8 iDraw; // item needs to be repainted
char szVal[32]; // it's value in Ascii
GVAL v; // it's binary item value
};
struct RegDsc {
I32 nGitems; // number of group items
I32 nRitems; // number of register items
RGROUP *GrpArr; // array of group descriptors
RITEM *RegArr; // array of register descriptors
void (*RegGet) (RITEM *vp, int nR); // get RegItem's value
I32 (*RegSet) (RITEM *vp, GVAL *pV); // set RegItem's value
};
#pragma pack()
#define UPR_NORMAL 0x80000000 // update normal registers
#define UPR_HIST 0x40000000 // update history registers
/*
* Advanced GDI Functions
*/
/*
* Error codes
*/
#define AG_OK 0 // Ok.
#define AG_NOACCESS 1 // Cannot access while running.
#define AG_RDFAILED 2 // memory read failed.
#define AG_INVALOP 3 // invalid operation code
#define AG_RO 4 // attempt to write Read-only item
#define AG_WRFAILED 5 // memory write failed.
#define AG_CANTMAP 6 // cannot map memory
/*
* 80x51 + Sle66(+) memory spaces, added 12/19/99
*/
#define amNONE 0x0000 // not spaced
#define amXDATA 0x0001 // XDATA
#define amBANK0 0x0080 // BANK0
#define amBANK31 0x009F // BANK31
#define amDATA 0x00F0 // DATA
#define amBIT 0x00F1 // BIT
#define amEDATA 0x00F2 // EDATA (i251)
#define amIDATA 0x00F3 // IDATA
#define amECODE 0x00F4 // 251 ecode
#define amHDATA 0x00F5 // 251 hdata
#define amHCONS 0x00F6 // 251 hconst
#define amCONST 0x00F7 // 251 const
#define amPDATA 0x00FE // PDATA (c51 macht das bei generic)
#define amCODE 0x00FF // CODE
#define amPHYS 0x0100 // Physical SLE66+ Memory
#define amPHLIM 0x0110 // 1MB Physical Memory
#define amU1MEM 0x00F8 // UsrMem #1 (E2-PROM)
#define amU2MEM 0x00F9 // UsrMem #2 (reserved for future use)
#define amU3MEM 0x00FA // UsrMem #3 (reserved for future use)
#define amU4MEM 0x00FB // UsrMem #4 (reserved for future use)
#define amU5MEM 0x00FC // UsrMem #5 (reserved for future use)
#define mmU6MEM 0x00FD // UsrMem #6 (reserved for future use)
/*
* Features
*/
typedef struct {
U32 MemAccR : 1; // memory-access while running supported
U32 RegAccR : 1; // register-access while running supported
U32 hTrace : 1; // trace-recording supported
U32 hCover : 1; // code coverage supported
U32 hPaLyze : 1; // Performance-Analyzer support
U32 hMemMap : 1; // Memory-Map support
U32 ResetR : 1; // Reset possible while running
} SUPP;
#pragma pack(1)
typedef struct {
UL32 Adr; // linear address
UL32 ErrAdr; // memory access failed address
UL32 nLen; // address range, used for memory-map
U16 mSpace; // memory space (not used on 166/167)
} GADR;
typedef struct { // Assemble/Disassemble
UL32 Adr; // linear address
UC8 Opc [8]; // 167 needs max. 4 Opcode bytes
I32 OpcLen; // Result length in assemble mode
SC8 szB [256]; // DisAsm-result or Asm-input line
I32 Result; // 0:=Ok, otherwise error
} DAAS;
typedef struct { // Memory-Range descriptor
UC8 mTyp; // 0=RAM, 1=ROM
UL32 nStart; // Memory start address
UL32 nSize; // Size of memory block (0=unused)
} OCM;
typedef struct { // 166/167 Device Info
UC8 Vendor [64]; // Device-Vendor: example 'Siemens'
UC8 Device [64]; // Device-Name: example 'C167CR-16FM'
UL32 Clock; // clock frequency
UC8 RestoreBp; // 1 := restore Breakpoints
UC8 Rtos; // OS: 0:=none, 1:=RtxTiny, 2:=RtxFull
UC8 Mod167; // 0:=166-Instr. Set 1:=167-Instr Set
UC8 useOnChipRom; // 1:=use on chip Rom
UC8 useOnChipXper; // 1:=use on chip X-peripherals (XRAM+CAN)
UC8 useMAC; // 0:=no MACC, 1:=MACC instr. used
OCM ExtMem[6]; // up to 6 external memory ranges
OCM Ican; // address range of on-chip CAN
OCM Irom; // address range of on-chip internal Rom
OCM Xram1; // address range of on-chip internal Xram
OCM Xram2; // address range of on-chip internal Xram
OCM Iram; // address range of on-chip internal Ram
UC8 PrjPath [260]; // path of project
UC8 AppName [260]; // path and name of loaded application
} DEV_X66;
#pragma pack()
/*
* Symbol search masks (may be combined using |) :
*/
#define AG_SYM_VAR 0x0001 // search for non-bit Variables
#define AG_SYM_CON 0x0002 // search for named Constants
#define AG_SYM_BIT 0x0004 // search for Bit in Memory
#define AG_SYM_LOC 0x0008 // search for Function/Label
/*
* Type of found symbol:
*/
#define AG_TP_VOID 0
#define AG_TP_BIT 1
#define AG_TP_CHAR 2
#define AG_TP_UCHAR 3
#define AG_TP_INT 4
#define AG_TP_UINT 5
#define AG_TP_SHORT 6
#define AG_TP_USHORT 7
#define AG_TP_LONG 8
#define AG_TP_ULONG 9
#define AG_TP_FLOAT 10
#define AG_TP_DOUBLE 11
#define AG_TP_PTR 12
#define AG_TP_UNION 13
#define AG_TP_STRUCT 14
#define AG_TP_FUNC 15
#define AG_TP_STRING 16
#define AG_TP_ENUM 17
#define AG_TP_FIELD 18
#pragma pack(1)
typedef struct { // Search for Sym by Name or Value.
UL32 nMask; // search mask (AG_SYM_LOC | ...)
UC8 szName [256]; // search/found name (zero-terminated
U64 val; // search/found Adr/Value
UL32 type; // type of found symbol (AG_TP_???)
UL32 Ok; // 1:=Ok, else find failed.
} SYMDSC;
#pragma pack()
/*
* Progress-Control Structure
*/
#define PROGRESS_INIT 1
#define PROGRESS_KILL 2
#define PROGRESS_SETPOS 3
#pragma pack(1)
typedef struct PgRess { // Progress-Setup and Control structure
I32 Job; // PROGRESS_INIT/KILL/SETPOS
I32 pos; // PROGRESS_SETPOS: position to set
I32 low; // low percent (normally 0)
I32 hig; // high percent (normally 100)
SC8 *label; // text-label before progress-bar or NULL
} OIL;
#pragma pack()
/*
* Init/Query Target features
*/
#define AG_INITFEATURES 0x0100 // Init target features
#define AG_GETFEATURE 0x0200 // extract a single feature
#define AG_INITITEM 0x0300 // Init item
#define AG_EXECITEM 0x0400 // Execute item
#define AG_F_MEMACCR 0x0001 // memory-access while running
#define AG_F_REGACCR 0x0002 // register-access while running
#define AG_F_TRACE 0x0003 // back-trace support
#define AG_F_COVERAGE 0x0004 // code-coverage support
#define AG_F_PALYZE 0x0005 // Performance-Analyzer support
#define AG_F_MEMMAP 0x0006 // Memory-Map support
#define AG_F_RESETR 0x0007 // Reset while running possible feature
// Items for 'AG_INITITEM':
#define AG_INITMENU 0x0007 // init extension menu
#define AG_INITEXTDLGUPD 0x0008 // init modeless extesion dlg update function
#define AG_INITMHANDLEP 0x0009 // setup ptr to HWND of active modeless dlg
#define AG_INITPHANDLEP 0x000A // pointer to parent handle (MainFrame)
#define AG_INITINSTHANDLE 0x000B // pointer to Agdi-instance handle
#define AG_INITBPHEAD 0x000E // pointer to Bp-head
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號(hào)
Ctrl + =
減小字號(hào)
Ctrl + -