?? comtyp.h
字號(hào):
#ifndef COMTYP_INCED
#define COMTYP_INCED
/*
* Common type defintions
*/
#ifndef _WINDEF_ // WinDef.h not included
typedef signed char CHAR;
typedef unsigned int DWORD;
typedef signed int INT32;
typedef unsigned short int UINT16;
// typedef unsigned short int WORD;
typedef signed int INT32;
typedef unsigned char BOOL;
#endif
typedef unsigned char BYTE;
typedef signed short int INT16;
typedef unsigned short int WORD16;
typedef __int64 INT64;
typedef unsigned __int64 UINT64;
typedef WORD16 *WFP;
typedef BYTE *CFP;
#define iMCS51 0 // ToolSet Definitions
#define iMCS251 1
#define iMCS166 2
#define iMCSFOX 3 // dead !
#define LIMMCS iMCSFOX // last valid environment
#define MAXTDRV 40 // max. target drivers per [Section]
#define MAXTIP 1024
union bw {
WORD16 word; // UINT16
BYTE byte[2];
};
union uw {
WORD16 ui[2];
DWORD ul;
};
#pragma pack(1)
/*
* Message-Subtypes for Registered Message 'WM_OUTOUT':
*/
#define MSG_UV2_TEXTOUT 0x0002
#define MSG_UV2_SERBOUT 0x0003
#define MSG_UV2_SERWOUT 0x0004
#define MSG_UV2_TERMINATE 0x0005
#define MSG_UV2_TRNLINE 0x0006 // Write into Build-Output window
#define MSG_UV2_AFTERBLD 0x0007 // post build/rebuild/translate
#define MSG_UV2_AFTERSVCS 0x0008 // post SVCS command
#define MSG_UV2_AFTERLINT 0x0009 // post LINT command
#define MSG_UV2_NOTIFY 0x000A // Notify message
#define MSG_UV2_SERVWKEY 0x000B // Key pressed in Serial View
#define MSG_UV2_CMDLINE 0x000C // Debug: write into command window
#define MSG_UV2_MSGSTRING 0x000D // Setup Message String
#define MSG_UV2_PRJCHANGE 0x000E // Project File has changed
#define MSG_UV2_SERBPACK 0x000F // packed serial byte out
#define MSG_UV2_CMDBUFLINE 0x0010 // Write puffered line into Command-Window
#define MSG_UV2_STARTDBG 0x0011 // Start Debugging
#define EBRK struct edbrk
struct edbrk {
EBRK *next;
DWORD nLine; // line number
DWORD nAdr; // and it's address
WORD16 type : 3; // 0:=AdrBrk, 1:=CondBrk, 2:=WatchBrk
WORD16 enabled : 1; // Break is enabled/disabled
WORD16 BytObj : 1; // WatchBrk: 0:=Bytes, 1:=Objects
DWORD many; // WatchBrk: many objects or bytes
DWORD tsize; // WatchBrk: size of object
WORD16 acc; // WatchBrk: 1:=Read, 2:=Write, 3:=Both
//WORD16 number; // BreakPoint-Number
//WORD16 BitPos;
int rcount; // Break is taken when rcount = 1
char *cmd; // Exec-Command
char *Line; // Breakpoint-Expression Line for Display
EBRK *enext; // for editor internal use
BYTE killed; // for editor internal use
char pF [MAX_PATH + 2]; // name of file
};
#define SITEM struct sItem
struct sItem {
struct sItem *next;
char *pS; // item text
char *pL; // button label
WORD16 nTyp; // SubType
};
#pragma pack()
struct pax {
INT64 cyc;
double tim;
};
#pragma pack(1)
typedef struct { // Memory-Range descriptor
BYTE mTyp; // 0=RAM, 1=ROM
DWORD nStart; // Memory start address
DWORD nSize; // Size of memory block (0=unused)
} MEMRANGE;
#pragma pack()
/*
* Debug-Startup values
*/
struct dbgblk {
char MainDll [MAX_PATH]; // 's166.dll'
char PeriDll [MAX_PATH]; // '80167.dll'
char MainArgs [MAX_PATH]; // args to MainDll
char PeriArgs [MAX_PATH]; // args to PeriDll
char TargDll [MAX_PATH]; // target dll (MON, Emu,...)
char TargArgs [1024]; // Arguments to/from MON,Emu,...
char tKey [MAX_PATH]; // ...Mon166.DLL --> Mon166
char *pjPath; // Project Path
char AppName [MAX_PATH]; // App name to load
char IniFile [MAX_PATH]; // INI-file to execute
char FncFile [MAX_PATH]; // File with target specific functions
EBRK *pBrk; // list of breakpoints
SITEM *pWa1; // Watch #1 Items
SITEM *pWa2; // Watch #2 Items
SITEM *pMem1; // Memory #1 Item
SITEM *pMem2; // Memory #2 Item
SITEM *pBox; // ToolBox Buttons
SITEM *pPad; // PA definitions
SITEM *pSym; // SymDlg Settings
//SITEM *pCov; // Coverage Dialog attrib(s)
DWORD targ : 1;
DWORD LdApp : 1; // load app at on startup
DWORD Gomain : 1; // Sim: Go till main()
DWORD Rbreak : 1; // Sim: restore breakpoints
DWORD Rwatch : 1; // Sim: restore watchpoints
DWORD Rmem : 1; // Sim: restore memory display
DWORD Rfunc : 1; // Sim: restore functions
DWORD Rbox : 1; // Sim: restore Toolbox
DWORD AutoFail : 1; // Sim: Autoload failed
SITEM *pMem3; // Memory #3 Item
SITEM *pMem4; // Memory #4 Item
char RtxDll [MAX_PATH]; // Rtx-Display dll
char RtxArgs [1024]; // Arguments to/from Rtx-Dll,...
char RtxKey [MAX_PATH]; // ...RtxTiny.DLL --> RtxTiny
// iMCS166
MEMRANGE ExtMem[6]; // up to 6 external memory ranges
MEMRANGE Ican; // address range of on-chip CAN
MEMRANGE Irom; // address range of on-chip internal Rom
MEMRANGE Xram1; // address range of on-chip internal Xram
MEMRANGE Xram2; // address range of on-chip internal Xram
MEMRANGE Iram; // address range of on-chip internal Ram
MEMRANGE Dflash; // address range of on-chip data flash
BYTE uocROM; // use on-chip rom (166+51)
BYTE uocXCAN; // use on-chip xram+can
BYTE Rtos; // OS: 0:=none, 1:=RtxTiny, 2:=RtxFull
BYTE Mod167; // 1:=use 167 instructions
// Common
DWORD Clock; // clock frequency
char Vendor [64]; // Device-Vendor: example 'Siemens'
char Device [64]; // Device-Name: example 'C167CR-16FM'
// iMCS51
WORD16 RomSz; // 0:=Rom(Sm), 1:=Rom(Cp), 2:=Rom(La)
DWORD uocArit : 1; // use on chip Arithmetic Unit
DWORD uocMdpt : 1; // use multiple data pointers
DWORD uocXRAM : 1; // use on chip XRAM
DWORD hadIRAM : 1; // IRAM(...) given per database
DWORD hadXRAM : 1; // XRAM(...) given per database
DWORD hadIROM : 1; // IROM(...) given per database
DWORD Moda2 : 1; // MODA2 (Atmel dual dptr)
DWORD Moddp2 : 1; // MODDP2 (Dallas dual dptr)
DWORD Modp2 : 1; // MODP2 (Philips+Temic dual dptr)
DWORD Mod517dp : 1; // multiple dptr for Infineon C500
DWORD Mod517au : 1; // Arithmetic Unit for Infineon C500
DWORD Mode2 : 1; // MODE2 given per database
DWORD useCB : 1; // CODE-banking (1:=activated)
DWORD useXB : 1; // XDATA-banking (1:=activated)
//DWORD useL251 : 1; // use L251 instead of BL51
//DWORD useA251 : 1; // use A251 instead of A51
DWORD Moddp2x : 1; // Dallas 89C420
DWORD Mod390 : 1; // Dallas 89C390
DWORD ModC812 : 1; // Analog Devices ADuC812
WORD16 cBanks; // 0:=2, 1:=4, 2:=8, 3:=16, 4:=32
WORD16 xBanks; // 0:=2, 1:=4, 2:=8, 3:=16, 4:=32
MEMRANGE rCB; // CODE-bank range
MEMRANGE rXB; // XDATA-bank range
MEMRANGE eprom[3]; // off-chip code memory
MEMRANGE exram[3]; // off-chip xram memory
MEMRANGE irom; // IROM range
MEMRANGE iram; // IRAM range
MEMRANGE xram; // XRAM range
char CanDll [MAX_PATH]; // Rtx-Display dll
char CanArgs [1024]; // Arguments to/from Can-Dll,...
//char CanKey [MAX_PATH]; // ...Can.DLL
char szMsg [1024]; // for error-message transfer to Uv2
//---more possible Bitfields go on here...
DWORD n1Res; // reserved for future devices
DWORD n2Res; // reserved for future devices
DWORD n3Res; // reserved for future devices
DWORD n4Res; // reserved for future devices
DWORD n5Res; // reserved for future devices
DWORD n6Res; // reserved for future devices
DWORD n7Res; // reserved for future devices
DWORD n8Res; // reserved for future devices
//---
};
/*
* Language-defines for INI-Env strings
*/
#define LANG_N 0 // undefined language
#define LANG_C 1 // C
#define LANG_A 2 // Asm
#define LANG_CPP 3 // C++
#define LANG_UT 4 // Utils
/*
* Exec: Translators
*/
#define xxWHAT 0 /* unknown translator */
#define xxC251 1
#define xxC51 2
#define xxC166 3
#define xxPLM51 4
#define xxL251 5
#define xxL51 6
#define xxL166 7
#define xxA51 8
#define xxA251 9
#define xxA166 10
#define xxA66 11
#define xxC66 12
#define xxL66 13
#define xxLIB166 14
#define xxLIB66 15
#define xxLIB51 16
#define xxLIB251 17
#define xxOH51 18
#define xxOH251 19
#define xxOH166 20
#define xxOH66 21
#define xxOC51 22
#define xxAX51 23 // Ax51 (Philips 80C51MX)
#define xxLX51 24
#define xxCX51 25
#define xxLIBX51 26
#define xxUSER 27
#define xxLINT 28
#ifdef __cplusplus
extern "C" {
#endif
/*
* in HelpFox.Asm: (in any Syntax-builder help file)
*/
extern int HELPEXPR;
extern int CANTHELP;
extern int HELPSTART;
extern void ShowError (BOOL box, char *fmt, ...);
extern void TrnOutLine (char *pLine); // into Build Window
extern void TrnOutL (char *pLine); // into Build Window (thread-safe)
extern void CmdOutLine (char *pLine); // into Command Window
extern void CmdCmdOut (char *pLine); // into Command Window
extern void OutOutLine (char *pLine); // into Output Window
extern void DoEvents (void); // keep System alive
extern DWORD Notify1 (DWORD nCode, void *lp1); // within thread
extern DWORD Notify (DWORD nCode, void *lp1); // thread-safe.
extern int SerByteOut (int nCom, BYTE *pS, DWORD nMany);
extern int SerWordOut (int nCom, WORD16 *pW, DWORD nMany);
extern void BootHelp (DWORD hlpExpr, DWORD noHelp, DWORD hStart);
extern WORD16 HandleCommand (char *pC, int nLen); // Uv3.cpp
struct vExec {
WORD16 nTrans; // Translator number
char *pCmd; // Command line
char *pUnit; // unit (unit name - src-name)
char *pfUnit; // full path of unit
char *pExPath; // Executable path (with \)
char *pSpawn; // Spawn command and path
char *cmdFile; // pathname of command file
char *objFile; // pathname of object file
char *pEnv; // Environment or NULL
int Status; // Process status
int Errors; // Errors
int Warnings; // Warnings
int exitCode;
int PID; // Process ID
WORD16 isObj : 1; // File is an OBJ file, can't create
WORD16 isLib : 1; // File is a LIB file, can't create
WORD16 PubOnly : 1;
WORD16 mark; // RegColor-Mark from DEPLST
WORD16 nBank; // BankNo
};
extern void ExecTrn (struct vExec *pX); // run translator
extern char szFileCT [512]; // current TargApp's pathname
#ifdef __cplusplus
} // End of 'extern "C"'
#endif
#endif
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號(hào)
Ctrl + =
減小字號(hào)
Ctrl + -