break        elif [ "$REPLY" = "2" ]; then            VP_GENDER="MALE"            break        elif [ "$REPLY" = "3" ]; then            VP_GENDER="FEMALE"            break        elif [ "$REPLY" = "Q" ] || [ "$REPLY" = "q" ]; then            exit 0        fi        #else try again    done}setAge() {    while true; do	echo ""	echo ""	echo ""        echo "Please enter the number corresponding to the age of this voice:"        echo "     0 <Cancel>"        echo "     1 Neutral:       Voice with an age that is indeterminate."        echo "     2 Child:         Age roughly up to 12 years."        echo "     3 Teenager:      Age roughly 13 to 19 years."        echo "     4 Younger Adult: Age roughly 20 to 40 years."        echo "     5 Middle Adult:  Age roughly 40 to 60 years."        echo "     6 Older Adult:   Age roughly 60 years and up."        echo "     Q <Quit>:        Abort the conversion process."	echo ""	echo ""        read        if [ "$REPLY" = "0" ]; then            break        elif [ "$REPLY" = "1" ]; then            VP_AGE="NEUTRAL"            break        elif [ "$REPLY" = "2" ]; then            VP_AGE="CHILD"            break        elif [ "$REPLY" = "3" ]; then            VP_AGE="TEENAGER"            break        elif [ "$REPLY" = "4" ]; then            VP_AGE="YOUNGER_ADULT"            break        elif [ "$REPLY" = "5" ]; then            VP_AGE="MIDDLE_ADULT"            break        elif [ "$REPLY" = "6" ]; then            VP_AGE="OLDER_ADULT"            break        elif [ "$REPLY" = "Q" ] || [ "$REPLY" = "q" ]; then            exit 0        fi        # else try again    done}if [ "$2" = "install" ]; then    VP_DOMAIN=$FV_LANG    VP_ORGANIZATION=$FV_INST    if [ "$FV_TYPE" = "diphone" ]; then        if ! [ "$FV_LANG" = "us" ]; then            echo            echo "This script can only install US/English voices."            echo "Please refer to your documentation for instructions on"            echo "how to procede."            exit -1;        fi        VP_DOMAIN="general"    elif [ "$FV_TYPE" = "ldom" ] || [ "$FV_TYPE" = "clunits" ]; then        if [ "$FV_TYPE" = "clunits" ]; then            VP_DOMAIN="general"        fi        echo        echo "Warning: For US/English voices, this script will default to a full"        echo "lexicon. For non US/English voices, no lexicon will be set;"        echo "manual work will be required to make the voice usable."	echo "If you need to adapt the lexicon settings, you can change"        echo "that in the java voice directory after the install"        echo "phase is finished."        echo        echo "Press <Enter> to continue, or <Ctrl-C> to cancel"        read    else        echo        echo "Only diphone, clunits, and ldom types are supported by this operation."        echo "Aborting."        exit -1;    fi    echo    echo "Do you want to import the festival phoneset into FreeTTS (y/n)?"    read    if [ "$REPLY" = "Y" ] || [ "$REPLY" = "y" ] ; then	(cd $VOICEDIR	echo Creating $OUTDIR/phoneset.txt	festival -b \	    festvox/$FV_FULLVOICENAME.scm \	    $ARCTICDIR/scheme/dump_phoneset.scm \	    "(begin (voice_${FV_FULLVOICENAME}) (dump_phoneset))" > \	    $OUTDIR/phoneset.txt	)    fi    while true; do        echo        echo        echo        echo        echo "Current properties of this voice:"        echo "     0 <continue with installation>"        echo "     1 Name:         '$VP_NAME'"        echo "     2 Gender:       '$VP_GENDER'"        echo "     3 Age:          '$VP_AGE'"        echo "     4 Description:  '$VP_DESCRIPTION'"        echo "     5 Full Name:    '$VP_FULL_NAME'"        echo "     6 Domain:       '$VP_DOMAIN'"        echo "     7 Organization: '$VP_ORGANIZATION'"	echo "     8 Language:     '$VP_LOCALE'"	echo "     9 Voice base path: '$VOICETARGETBASE'"        echo "     H <Help>"        echo "     Q <Quit>:       Abort the conversion process."        echo        echo        echo "Enter the number for the property you would like to change,"        echo "'0' if everything looks correct, or 'Q' to exit:"        read        if [ "$REPLY" = "Q" ] || [ "$REPLY" = "q" ]; then            exit 0        elif [ "$REPLY" = "H" ] || [ "$REPLY" = "h" ]; then            echo            echo            echo            echo            echo            echo            echo "  Name: generally a one-word name by which you want this"            echo "    voice to be known, such as \"kevin\", \"alan\","            echo "    or \"dave\"."            echo "  Description: a sentence or so that describes this voice."            echo "  Gender: male, female, or neutral"            echo "  Age: one of: Neutral, Child, Teenager, Younger Adult,"            echo "    Middle Adult, Older Adult"            echo "  Full Name: the name that will be used for the FreeTTS"            echo "    files for this voice.  The Full Name must be unique"            echo "    name from all other voices in FreeTTS.  It is HIGHLY"            echo "    recommended that you do NOT change this property unless"            echo "    it conflicts with an existing voice."            echo "  Domain: the domain for limited domain voices (such as"            echo "    \"time\" or \"weather\"), otherwise \"general\"."            echo "  Organization: the organization which recorded the voice,"            echo "    such as \"sun\" or \"cmu\"."            echo "  All properties can be changed manually after the conversion"            echo "    process, but it is easiest to do it now."            echo            echo "Press <Enter> to return to the menu."            read UNUSED        elif [ "$REPLY" = "0" ]; then  # only way to exit while loop	    LOCALEPATH=`echo $VP_LOCALE | sed "s|_|/|g" | tr A-Z a-z`	    # OK, user agreed to these settings -- let's remember them            # for the future (i.e., compile).            (              echo "# Description of this voice for FreeTTS"              echo "VP_NAME=\"$VP_NAME\""              echo "VP_GENDER=\"$VP_GENDER\""              echo "VP_AGE=\"$VP_AGE\""              echo "VP_DESCRIPTION=\"$VP_DESCRIPTION\""              echo "VP_FULL_NAME=\"$VP_FULL_NAME\""              echo "VP_LOCALE=\"$VP_LOCALE\""              echo "LOCALEPATH=\"$LOCALEPATH\""              echo "VOICETARGETBASE=\"$VOICETARGETBASE\""            ) > $VOICEDIR/etc/freetts.properties	    VOICETARGETDIR=$FREETTSDIR/$VOICETARGETBASE/$LOCALEPATH            if [ -d "$VOICETARGETDIR/$VP_FULL_NAME" ]; then                echo                echo "Warning: the voice '$FV_VOICENAME' is already installed"                echo "in this version of FreeTTS (in $VOICETARGETDIR)."                echo "Please enter the number corresponding to the action you would like to take: "                echo "     0 Cancel conversion process"                echo "     1 Over-write existing voice"                echo "     2 Change your voice's Full Name"                echo "        (it is recommended to follow a convention similar"                echo "         to <institution>_<lang/domain>_<name>)"                read REPLY2                if [ "$REPLY2" = "0" ]; then                    exit 0                elif [ "$REPLY2" = "1" ]; then                    echo                    echo "Are you sure you want to over-write the existing"                    echo "voice?  WARNING: May cause permanent loss of"                    echo "existing voice!  (Yes/No/Cancel):"                    read REPLY3                    if [ "$REPLY3" = "Y" ] || [ "$REPLY3" = "y" ] \                        || [ "$REPLY3" = "yes" ] || [ "$REPLY3" = "Yes" ] \                        || [ "$REPLY3" = "YES" ]; then                        echo                        echo "***** Over-writing existing voice *****"                        break # exit while loop                    fi                fi            else                break # exit while loop            fi        elif [ "$REPLY" = "1" ]; then            echo            echo "Enter a new name: "            read VP_NAME        elif [ "$REPLY" = "2" ]; then            setGender        elif [ "$REPLY" = "3" ]; then            setAge        elif [ "$REPLY" = "4" ]; then            echo            echo "Enter a new Description: "            read VP_DESCRIPTION        elif [ "$REPLY" = "5" ]; then            echo            echo "Enter a new Full Name: "            read VP_FULL_NAME        elif [ "$REPLY" = "6" ]; then            echo            echo "Enter a new domain (\"general\" for unlimited domains) : "            read VP_DOMAIN        elif [ "$REPLY" = "7" ]; then            echo            echo "Enter the organization which created this voice: "            read VP_ORGANIZATION	elif [ "$REPLY" = "8" ]; then	    echo	    echo "Enter the ISO Locale code for the language you are using,"            echo "e.g., 'en_US' or 'de': "	    read VP_LOCALE	elif [ "$REPLY" = "9" ]; then	    echo	    echo "Enter the path where to install the voice:"	    read VOICETARGETBASE        fi    done    # start from a clean slate    rm -rf "$VOICETARGETDIR/$VP_FULL_NAME" 2>/dev/null    mkdir -p "$VOICETARGETDIR/$VP_FULL_NAME" 2>/dev/null    if ! [ -d "$VOICETARGETDIR/$VP_FULL_NAME" ]; then        echo        echo "ERROR: Unable to create $VOICETARGETDIR/$VP_FULL_NAME."        echo "Aborting."    fi        # java class names should begin with a capital letter    VOICEDIRECTORY_CLASS=`echo $VP_NAME | awk '{ print(toupper(substr($0,1,1)) substr($0,2)) }'`"VoiceDirectory"	FULL_VOICEDIRECTORY_CLASS=`echo $VOICETARGETBASE/$LOCALEPATH/$VP_FULL_NAME/$VOICEDIRECTORY_CLASS | tr / .`	(        echo "Copyright 2003 Sun Microsystems, Inc."        echo         echo "See the file "license.terms" for information on usage and redistribution of"        echo "this file, and for a DISCLAIMER OF ALL WARRANTIES."        echo        echo        echo "This directory contains a voice imported from FestVox."        echo "$VP_FULL_NAME.txt is the text version of the voice data."        echo ".bin and .idx files are compiled versions of this file."        echo "$VOICEDIRECTORY_CLASS.java is the voice directory which"        echo "contains information about the voices (or variations on"        echo "voices) that are provided in this directory.  By default"        echo "the FestVox to FreeTTS conversion utility only puts one"        echo "voice in this directory."        echo        echo "$VP_FULL_NAME.jar is the file that is created when FreeTTS"        echo "is compiled.  This jar file will be put in the same directory"        echo "as the other FreeTTS jar files.  (Generally '<FreeTTS>/lib/')"        echo "voice.Manifest is used as the Manifest for the jar file."        echo        echo "Please confirm that $VOICEDIRECTORY_CLASS.java and"        echo "voice.Manifest contain the correct information."        echo "(If you created a ldom voice, it is still configured to use"        echo "a full US/English lexicon.  You may wish to change that)."    ) > "$VOICETARGETDIR/$VP_FULL_NAME/README"    cp -f "$OUTDIR/phoneset.txt" "$VOICETARGETDIR/$VP_FULL_NAME/phoneset.txt"    cp -f "$OUTDIR/$FV_VOICENAME.txt" "$VOICETARGETDIR/$VP_FULL_NAME/$VP_FULL_NAME.txt"    echo "Main-Class: $FULL_VOICEDIRECTORY_CLASS" > "$VOICETARGETDIR/$VP_FULL_NAME/voice.Manifest"    echo "FreeTTSVoiceDefinition: true" >> "$VOICETARGETDIR/$VP_FULL_NAME/voice.Manifest"    if [ "$VP_LOCALE" = "en_US" ]; then	echo "ClassPath: cmulex.jar" >> "$VOICETARGETDIR/$VP_FULL_NAME/voice.Manifest"    fi    if [ "$FV_TYPE" = "diphone" ]; then        VD_TEMPLATE="$HELPERDIR/CMU_USDiphoneTemplate.java.template"        UNIT_DATABASE_CLASS="com.sun.speech.freetts.diphone.DiphoneUnitDatabase"        MAKEFILE_EXCLUDE="CLUNITS_ONLY"    else #clunit	if [ "$VP_LOCALE" = "en_US" ]; then	    VD_TEMPLATE="$HELPERDIR/CMU_USClunitTemplate.java.template"	elif [ "$FV_TYPE" = "ldom" ]; then	    VD_TEMPLATE="$HELPERDIR/BaseLdomTemplate.java.template"	else	    VD_TEMPLATE="$HELPERDIR/BaseClunitTemplate.java.template"	fi        UNIT_DATABASE_CLASS="com.sun.speech.freetts.clunits.ClusterUnitDatabase"        MAKEFILE_EXCLUDE="DIPHONE_ONLY"    fi    JAVALOCALE=`echo $VP_LOCALE | sed "s/_/\", \"/g"`    PACKAGEPATH=`echo $VOICETARGETBASE/$LOCALEPATH | tr / .`    # create the voice directory class    cat $VD_TEMPLATE | sed "s/%CLASSNAME%/$VOICEDIRECTORY_CLASS/g" \	| sed "s/%PATH%/$PACKAGEPATH/g" \        | sed "s/%VOICENAME%/$VP_FULL_NAME/g" \        | sed "s/%NAME%/$VP_NAME/g" \        | sed "s/%GENDER%/$VP_GENDER/g" \        | sed "s/%AGE%/$VP_AGE/g" \        | sed "s/%DESCRIPTION%/$VP_DESCRIPTION/g" \        | sed "s/%DOMAIN%/$VP_DOMAIN/g" \        | sed "s/%ORGANIZATION%/$VP_ORGANIZATION/g" \	| sed "s/%LOCALE%/$JAVALOCALE/g" \        > "$VOICETARGETDIR/$VP_FULL_NAME/$VOICEDIRECTORY_CLASS.java"    echo "The voice has been successfully installed in"    echo "$VOICETARGETDIR/$VP_FULL_NAME/"fi