/* *  drivers/mtd/nand/ppchameleonevb.c * *  Copyright (C) 2003 DAVE Srl (info@wawnet.biz) * *  Derived from drivers/mtd/nand/edb7312.c * * * $Id: ppchameleonevb.c,v 1.6 2004/11/05 16:07:16 kalev Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * *  Overview: *   This is a device driver for the NAND flash devices found on the *   PPChameleon/PPChameleonEVB system. *   PPChameleon options (autodetected): *   - BA model: no NAND *   - ME model: 32MB (Samsung K9F5608U0B) *   - HI model: 128MB (Samsung K9F1G08UOM) *   PPChameleonEVB options: *   - 32MB (Samsung K9F5608U0B) */#include <linux/init.h>#include <linux/slab.h>#include <linux/module.h>#include <linux/mtd/mtd.h>#include <linux/mtd/nand.h>#include <linux/mtd/partitions.h>#include <asm/io.h>#include <platforms/PPChameleonEVB.h>#undef USE_READY_BUSY_PIN#define USE_READY_BUSY_PIN/* see datasheets (tR) */#define NAND_BIG_DELAY_US		25#define NAND_SMALL_DELAY_US		10/* handy sizes */#define SZ_4M                           0x00400000#define NAND_SMALL_SIZE                 0x02000000#define NAND_MTD_NAME		"ppchameleon-nand"#define NAND_EVB_MTD_NAME	"ppchameleonevb-nand"/* GPIO pins used to drive NAND chip mounted on processor module */#define NAND_nCE_GPIO_PIN 		(0x80000000 >> 1)#define NAND_CLE_GPIO_PIN 		(0x80000000 >> 2)#define NAND_ALE_GPIO_PIN 		(0x80000000 >> 3)#define NAND_RB_GPIO_PIN 		(0x80000000 >> 4)/* GPIO pins used to drive NAND chip mounted on EVB */#define NAND_EVB_nCE_GPIO_PIN 	(0x80000000 >> 14)#define NAND_EVB_CLE_GPIO_PIN 	(0x80000000 >> 15)#define NAND_EVB_ALE_GPIO_PIN 	(0x80000000 >> 16)#define NAND_EVB_RB_GPIO_PIN 	(0x80000000 >> 31)/* * MTD structure for PPChameleonEVB board */static struct mtd_info *ppchameleon_mtd 	= NULL;static struct mtd_info *ppchameleonevb_mtd = NULL;/* * Module stuff */static unsigned long ppchameleon_fio_pbase 	= CFG_NAND0_PADDR;static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;#ifdef MODULEmodule_param(ppchameleon_fio_pbase, ulong, 0);module_param(ppchameleonevb_fio_pbase, ulong, 0);#else__setup("ppchameleon_fio_pbase=",ppchameleon_fio_pbase);__setup("ppchameleonevb_fio_pbase=",ppchameleonevb_fio_pbase);#endif#ifdef CONFIG_MTD_PARTITIONS/* * Define static partitions for flash devices */static struct mtd_partition partition_info_hi[] = {	{ name: "PPChameleon HI Nand Flash",		  offset: 0,		  size: 128*1024*1024 }};static struct mtd_partition partition_info_me[] = {	{ name: "PPChameleon ME Nand Flash",		  offset: 0,		  size: 32*1024*1024 }};static struct mtd_partition partition_info_evb[] = {	{ name: "PPChameleonEVB Nand Flash",		  offset: 0,		  size: 32*1024*1024 }};#define NUM_PARTITIONS 1extern int parse_cmdline_partitions(struct mtd_info *master,				    struct mtd_partition **pparts,				    const char *mtd_id);#endif/* *	hardware specific access to control-lines */static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd){	switch(cmd) {	case NAND_CTL_SETCLE:        	MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);		break;	case NAND_CTL_CLRCLE:        	MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);		break;	case NAND_CTL_SETALE:        	MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);		break;	case NAND_CTL_CLRALE:        	MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);		break;	case NAND_CTL_SETNCE:			MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);		break;	case NAND_CTL_CLRNCE:			MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);		break;	}}static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd){	switch(cmd) {	case NAND_CTL_SETCLE:        	MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);		break;	case NAND_CTL_CLRCLE:        	MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);		break;	case NAND_CTL_SETALE:        	MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);		break;	case NAND_CTL_CLRALE:        	MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);		break;	case NAND_CTL_SETNCE:        	MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);		break;	case NAND_CTL_CLRNCE:        	MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);		break;	}}#ifdef USE_READY_BUSY_PIN/* *	read device ready pin */static int ppchameleon_device_ready(struct mtd_info *minfo){	if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_RB_GPIO_PIN)		return 1;	return 0;}static int ppchameleonevb_device_ready(struct mtd_info *minfo){	if (in_be32((volatile unsigned*)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)	return 1;	return 0;}#endif#ifdef CONFIG_MTD_PARTITIONSconst char *part_probes[] = { "cmdlinepart", NULL };const char *part_probes_evb[] = { "cmdlinepart", NULL };#endif/* * Main initialization routine */static int __init ppchameleonevb_init (void){	struct nand_chip *this;	const char *part_type = 0;	int mtd_parts_nb = 0;	struct mtd_partition *mtd_parts = 0;	void __iomem *ppchameleon_fio_base;	void __iomem *ppchameleonevb_fio_base;	/*********************************	* Processor module NAND (if any) *	*********************************/	/* Allocate memory for MTD device structure and private data */	ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) +						      sizeof(struct nand_chip), GFP_KERNEL);	if (!ppchameleon_mtd) {		printk("Unable to allocate PPChameleon NAND MTD device structure.\n");		return -ENOMEM;	}	/* map physical address */	ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);	if(!ppchameleon_fio_base) {		printk("ioremap PPChameleon NAND flash failed\n");		kfree(ppchameleon_mtd);		return -EIO;	}	/* Get pointer to private data */	this = (struct nand_chip *) (&ppchameleon_mtd[1]);	/* Initialize structures */	memset((char *) ppchameleon_mtd, 0, sizeof(struct mtd_info));	memset((char *) this, 0, sizeof(struct nand_chip));	/* Link the private data with the MTD structure */	ppchameleon_mtd->priv = this;        /* Initialize GPIOs */	/* Pin mapping for NAND chip */	/*		CE	GPIO_01		CLE	GPIO_02		ALE	GPIO_03		R/B	GPIO_04	*/	/* output select */	out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xC0FFFFFF);	/* three-state select */	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xC0FFFFFF);	/* enable output driver */	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);#ifdef USE_READY_BUSY_PIN	/* three-state select */	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFF3FFFFF);	/* high-impedecence */	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));	/* input select */	out_be32((volatile unsigned*)GPIO0_ISR1H, (in_be32((volatile unsigned*)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);#endif	/* insert callbacks */	this->IO_ADDR_R = ppchameleon_fio_base;	this->IO_ADDR_W = ppchameleon_fio_base;	this->hwcontrol = ppchameleon_hwcontrol;#ifdef USE_READY_BUSY_PIN	this->dev_ready = ppchameleon_device_ready;#endif	this->chip_delay = NAND_BIG_DELAY_US;	/* ECC mode */	this->eccmode = NAND_ECC_SOFT;	/* Scan to find existence of the device (it could not be mounted) */	if (nand_scan (ppchameleon_mtd, 1)) {		iounmap((void *)ppchameleon_fio_base);		kfree (ppchameleon_mtd);		goto nand_evb_init;	}#ifndef USE_READY_BUSY_PIN	/* Adjust delay if necessary */	if (ppchameleon_mtd->size == NAND_SMALL_SIZE)		this->chip_delay = NAND_SMALL_DELAY_US;#endif#ifdef CONFIG_MTD_PARTITIONS	ppchameleon_mtd->name = "ppchameleon-nand";	mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0);	if (mtd_parts_nb > 0)	  part_type = "command line";	else	  mtd_parts_nb = 0;#endif	if (mtd_parts_nb == 0)	{		if (ppchameleon_mtd->size == NAND_SMALL_SIZE)			mtd_parts = partition_info_me;		else			mtd_parts = partition_info_hi;		mtd_parts_nb = NUM_PARTITIONS;		part_type = "static";	}	/* Register the partitions */	printk(KERN_NOTICE "Using %s partition definition\n", part_type);	add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb);nand_evb_init:	/****************************	* EVB NAND (always present) *	****************************/	/* Allocate memory for MTD device structure and private data */	ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) +							 sizeof(struct nand_chip), GFP_KERNEL);	if (!ppchameleonevb_mtd) {		printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");		return -ENOMEM;	}	/* map physical address */	ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);	if(!ppchameleonevb_fio_base) {		printk("ioremap PPChameleonEVB NAND flash failed\n");		kfree(ppchameleonevb_mtd);		return -EIO;	}	/* Get pointer to private data */	this = (struct nand_chip *) (&ppchameleonevb_mtd[1]);	/* Initialize structures */	memset((char *) ppchameleonevb_mtd, 0, sizeof(struct mtd_info));	memset((char *) this, 0, sizeof(struct nand_chip));	/* Link the private data with the MTD structure */	ppchameleonevb_mtd->priv = this;        /* Initialize GPIOs */	/* Pin mapping for NAND chip */	/*		CE	GPIO_14		CLE	GPIO_15		ALE	GPIO_16		R/B	GPIO_31	*/	/* output select */	out_be32((volatile unsigned*)GPIO0_OSRH, in_be32((volatile unsigned*)GPIO0_OSRH) & 0xFFFFFFF0);	out_be32((volatile unsigned*)GPIO0_OSRL, in_be32((volatile unsigned*)GPIO0_OSRL) & 0x3FFFFFFF);	/* three-state select */	out_be32((volatile unsigned*)GPIO0_TSRH, in_be32((volatile unsigned*)GPIO0_TSRH) & 0xFFFFFFF0);	out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0x3FFFFFFF);	/* enable output driver */	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN | 		 NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);#ifdef USE_READY_BUSY_PIN	/* three-state select */	out_be32((volatile unsigned*)GPIO0_TSRL, in_be32((volatile unsigned*)GPIO0_TSRL) & 0xFFFFFFFC);	/* high-impedecence */	out_be32((volatile unsigned*)GPIO0_TCR, in_be32((volatile unsigned*)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));	/* input select */	out_be32((volatile unsigned*)GPIO0_ISR1L, (in_be32((volatile unsigned*)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);#endif	/* insert callbacks */	this->IO_ADDR_R = ppchameleonevb_fio_base;	this->IO_ADDR_W = ppchameleonevb_fio_base;	this->hwcontrol = ppchameleonevb_hwcontrol;#ifdef USE_READY_BUSY_PIN	this->dev_ready = ppchameleonevb_device_ready;#endif	this->chip_delay = NAND_SMALL_DELAY_US;	/* ECC mode */	this->eccmode = NAND_ECC_SOFT;	/* Scan to find existence of the device */	if (nand_scan (ppchameleonevb_mtd, 1)) {		iounmap((void *)ppchameleonevb_fio_base);		kfree (ppchameleonevb_mtd);		return -ENXIO;	}#ifdef CONFIG_MTD_PARTITIONS	ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;	mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0);	if (mtd_parts_nb > 0)	  part_type = "command line";	else	  mtd_parts_nb = 0;#endif	if (mtd_parts_nb == 0)	{		mtd_parts = partition_info_evb;		mtd_parts_nb = NUM_PARTITIONS;		part_type = "static";	}	/* Register the partitions */	printk(KERN_NOTICE "Using %s partition definition\n", part_type);	add_mtd_partitions(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb);	/* Return happy */	return 0;}module_init(ppchameleonevb_init);/* * Clean up routine */static void __exit ppchameleonevb_cleanup (void){	struct nand_chip *this;	/* Release resources, unregister device(s) */	nand_release (ppchameleon_mtd);	nand_release (ppchameleonevb_mtd);		/* Release iomaps */	this = (struct nand_chip *) &ppchameleon_mtd[1];	iounmap((void *) this->IO_ADDR_R;	this = (struct nand_chip *) &ppchameleonevb_mtd[1];	iounmap((void *) this->IO_ADDR_R;	/* Free the MTD device structure */	kfree (ppchameleon_mtd);	kfree (ppchameleonevb_mtd);}module_exit(ppchameleonevb_cleanup);MODULE_LICENSE("GPL");MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>");MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");