//***************************************************************************//
//文件描述：SPLC501底層驅動程序，主要包括對液晶的IO口初始化、寫指令、寫數據、
//讀數據，以及西文ASCII表數據
//聲明：	小丑	20050518	Sunnorth	Mz Design
//
//
//***************************************************************************//
.include SPLC501Driver_IO.inc
.ram
.code
//***************************************************************************//
//程序：F_SPLC501_Initial_IO()
//描述：SPLC501接口的初始化程序  C語言調用，匯編語言調用  
//參數：無
//聲明：小丑	20050518	sunnorth  Mz Design
//注意：破壞R1寄存器，保護R1
//***************************************************************************//
.public _F_SPLC501_Initial_IO
_F_SPLC501_Initial_IO:
F_SPLC501_Initial_IO:
		push	r1 to [sp]
		r1 = [P_IO_Data_Di]
		r1 |= M_IO_DATA_MASK
		[P_IO_Data_Di] = r1
		r1 = [P_IO_Data_A]
		r1 |= M_IO_DATA_MASK
		[P_IO_Data_A] = r1
		r1 = [P_IO_Data_B]
		r1 |= M_IO_DATA_MASK
		[P_IO_Data_D] = r1
		
		r1 = [P_IO_Ctrl_Di]
		r1 |= (M_IO_EP+M_IO_AO+M_IO_RW+M_IO_CS)
		[P_IO_Ctrl_Di] = r1
		r1 = [P_IO_Ctrl_A]
		r1 |= (M_IO_EP+M_IO_AO+M_IO_RW+M_IO_CS)
		[P_IO_Ctrl_A] = r1
		r1 = [P_IO_Ctrl_B]
		r1 &= ~(M_IO_EP+M_IO_AO+M_IO_RW+M_IO_CS)
		[P_IO_Ctrl_D] = r1
		pop		r1 from [sp]
		retf
//***************************************************************************//
//程序：F_SPLC501_Write_Com()
//描述：往SPLC501里寫一個字節指令  C語言調用，匯編語言調用  
//參數：r1送入要傳送的指令
//聲明：小丑	20050518	sunnorth  Mz Design
//注意：破壞R1寄存器，保護R2、R5寄存器
//***************************************************************************//
.public	_F_SPLC501_Write_Com
_F_SPLC501_Write_Com:
F_SPLC501_Write_Com:
	push	r2,r3 to [sp]
	push	r5 to [sp]
	
	r2 = [P_IO_Ctrl_B]				//得到IOB口的狀態
	r2 &= ~(M_IO_EP+M_IO_CS)		//EP CS to Low 20050613 Edit by xinqiang			
	[P_IO_Ctrl_B] = r2 				//EP Low
	r2 = [P_IO_Ctrl_B]
	r2 &= ~(M_IO_AO+M_IO_RW)	
	[P_IO_Ctrl_B] = r2				//AO RW Low
	
.ifdef DATA_PORT_HIGHT
	r1 = r1 lsl 4
	r1 = r1 lsl 4
.endif
	
	r3 = [P_IO_Data_B]
	r3 &= ~M_IO_DATA_MASK 
	r1 &= M_IO_DATA_MASK					//Get Low Data Command
	r1 = r1+r3
	[P_IO_Data]	= r1				//往數據口送數據
	nop
	
	r2 |= M_IO_EP					//EP to Hight
	[P_IO_Ctrl]	= r2
	nop
	r2 &= ~M_IO_EP					//EP to Low
	r2 |= M_IO_CS					//CS to hight		20050613 Edit by xinqiang
	[P_IO_Ctrl] = r2
	
	pop		r5 from [sp]
	pop		r2,r3 from [sp]
	retf
	
//***************************************************************************//
//程序：F_SPLC501_Write_Data()
//描述：往SPLC501里寫一個字節數據  C語言調用，匯編語言調用  
//參數：r1送入要傳送的數據
//聲明：小丑	20050518	sunnorth  Mz Design
//注意：破壞R1寄存器，保護R2、R5寄存器
//***************************************************************************//
.public _F_SPLC501_Write_Data
_F_SPLC501_Write_Data:
F_SPLC501_Write_Data:
	push	r2 to [sp]
	
	r2 = [P_IO_Ctrl_B]				//得到IOB口的狀態
	r2 &= ~(M_IO_EP+M_IO_CS)		//EP CS to Low	20050613 Editby xinqiang					
	[P_IO_Ctrl_B] = r2 				//EP Low
	r2 = [P_IO_Ctrl_B]
	r2 |= M_IO_AO
	r2 &= ~(M_IO_RW)	
	[P_IO_Ctrl_B] = r2				//AO Hight, RW Low
	
.ifdef DATA_PORT_HIGHT
	r1 = r1 lsl 4
	r1 = r1 lsl 4
.endif
	
	r3 = [P_IO_Data_B]
	r3 &= ~M_IO_DATA_MASK 
	r1 &= M_IO_DATA_MASK					//Get Low Data Command
	r1 = r1+r3
	[P_IO_Data]	= r1				//往數據口送數據
	nop
	
	r2 |= M_IO_EP					//EP to Hight
	[P_IO_Ctrl]	= r2
	nop
	r2 &= ~M_IO_EP					//EP to Low
	r2 |= M_IO_CS					//CS to Hight  20050613 Editby xinqiag
	[P_IO_Ctrl] = r2	
	
	pop		r2 from [sp]
	retf
	
//***************************************************************************//
//程序：F_SPLC501_Read_Data()
//描述：從SPLC501里讀一個字節數據  C語言調用，匯編語言調用  
//參數：r1輸出傳送的數據
//聲明：小丑	20050518	sunnorth  Mz Design
//注意：破壞R1寄存器，保護R2、R5寄存器
//***************************************************************************//
.public _F_SPLC501_Read_Data
.public F_SPLC501_Read_Data
_F_SPLC501_Read_Data:
F_SPLC501_Read_Data:
	call F_SPLC501_Read_Data1
	call F_SPLC501_Read_Data1
	retf
F_SPLC501_Read_Data1:
	push	r2 to [sp]
	r2 = [P_IO_Data_Di]				//設置數據口為輸入
	r2 &= ~M_IO_DATA_MASK
	[P_IO_Data_Di] = r2
	
	r2 = [P_IO_Ctrl_B]				//得到IOB口的狀態
	r2 &= ~(M_IO_EP+M_IO_CS)		//EP CS to Low 20050613  Editby xinqiang					
	[P_IO_Ctrl_B] = r2 				//EP Low
	r2 |= (M_IO_AO+M_IO_RW)
	[P_IO_Ctrl_B] = r2				//AO Hight, RW Hight
	nop
	r2 |= M_IO_EP
	[P_IO_Ctrl_B] = r2				//產生EP高電平，
	nop
	r2 &= ~M_IO_EP					//EP to Low
	[P_IO_Ctrl] = r2
	r1 = [P_IO_Data]
	r1 &= M_IO_DATA_MASK
	r2 |= M_IO_CS
	[P_IO_Ctrl] = r2
	r2 = [P_IO_Data_Di]				//恢復數據口為輸出狀態
	r2 |= M_IO_DATA_MASK
	[P_IO_Data_Di] = r2
.ifdef DATA_PORT_HIGHT
	r1 = r1 lsr 4
	r1 = r1 lsr 4
.endif
	pop		r2 from [sp]
	retf

//***************************************************************************//
//程序：F_SPLC501_Read_Status()
//描述：從SPLC501里讀狀態字數據  C語言調用，匯編語言調用  
//參數：r1輸出傳送的數據
//聲明：小丑	20050518	sunnorth  Mz Design