AT91C_WDTC_KEY            EQU (0xFF:SHL:24) ;- (WDTC) Watchdog KEY Password
;- -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register -------- 
AT91C_WDTC_WDV            EQU (0xFFF:SHL:0) ;- (WDTC) Watchdog Timer Restart
AT91C_WDTC_WDFIEN         EQU (0x1:SHL:12) ;- (WDTC) Watchdog Fault Interrupt Enable
AT91C_WDTC_WDRSTEN        EQU (0x1:SHL:13) ;- (WDTC) Watchdog Reset Enable
AT91C_WDTC_WDRPROC        EQU (0x1:SHL:14) ;- (WDTC) Watchdog Timer Restart
AT91C_WDTC_WDDIS          EQU (0x1:SHL:15) ;- (WDTC) Watchdog Disable
AT91C_WDTC_WDD            EQU (0xFFF:SHL:16) ;- (WDTC) Watchdog Delta Value
AT91C_WDTC_WDDBGHLT       EQU (0x1:SHL:28) ;- (WDTC) Watchdog Debug Halt
AT91C_WDTC_WDIDLEHLT      EQU (0x1:SHL:29) ;- (WDTC) Watchdog Idle Halt
;- -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register -------- 
AT91C_WDTC_WDUNF          EQU (0x1:SHL:0) ;- (WDTC) Watchdog Underflow
AT91C_WDTC_WDERR          EQU (0x1:SHL:1) ;- (WDTC) Watchdog Error

;- *****************************************************************************
;-              SOFTWARE API DEFINITION  FOR Voltage Regulator Mode Controller Interface
;- *****************************************************************************
                ^ 0 ;- AT91S_VREG
VREG_MR         #  4 ;- Voltage Regulator Mode Register
;- -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register -------- 
AT91C_VREG_PSTDBY         EQU (0x1:SHL:0) ;- (VREG) Voltage Regulator Power Standby Mode

;- *****************************************************************************
;-              SOFTWARE API DEFINITION  FOR Memory Controller Interface
;- *****************************************************************************
                ^ 0 ;- AT91S_MC
MC_RCR          #  4 ;- MC Remap Control Register
MC_ASR          #  4 ;- MC Abort Status Register
MC_AASR         #  4 ;- MC Abort Address Status Register
                # 84 ;- Reserved
MC_FMR          #  4 ;- MC Flash Mode Register
MC_FCR          #  4 ;- MC Flash Command Register
MC_FSR          #  4 ;- MC Flash Status Register
;- -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- 
AT91C_MC_RCB              EQU (0x1:SHL:0) ;- (MC) Remap Command Bit
;- -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- 
AT91C_MC_UNDADD           EQU (0x1:SHL:0) ;- (MC) Undefined Addess Abort Status
AT91C_MC_MISADD           EQU (0x1:SHL:1) ;- (MC) Misaligned Addess Abort Status
AT91C_MC_ABTSZ            EQU (0x3:SHL:8) ;- (MC) Abort Size Status
AT91C_MC_ABTSZ_BYTE       EQU (0x0:SHL:8) ;- (MC) Byte
AT91C_MC_ABTSZ_HWORD      EQU (0x1:SHL:8) ;- (MC) Half-word
AT91C_MC_ABTSZ_WORD       EQU (0x2:SHL:8) ;- (MC) Word
AT91C_MC_ABTTYP           EQU (0x3:SHL:10) ;- (MC) Abort Type Status
AT91C_MC_ABTTYP_DATAR     EQU (0x0:SHL:10) ;- (MC) Data Read
AT91C_MC_ABTTYP_DATAW     EQU (0x1:SHL:10) ;- (MC) Data Write
AT91C_MC_ABTTYP_FETCH     EQU (0x2:SHL:10) ;- (MC) Code Fetch
AT91C_MC_MST0             EQU (0x1:SHL:16) ;- (MC) Master 0 Abort Source
AT91C_MC_MST1             EQU (0x1:SHL:17) ;- (MC) Master 1 Abort Source
AT91C_MC_SVMST0           EQU (0x1:SHL:24) ;- (MC) Saved Master 0 Abort Source
AT91C_MC_SVMST1           EQU (0x1:SHL:25) ;- (MC) Saved Master 1 Abort Source
;- -------- MC_FMR : (MC Offset: 0x60) MC Flash Mode Register -------- 
AT91C_MC_FRDY             EQU (0x1:SHL:0) ;- (MC) Flash Ready
AT91C_MC_LOCKE            EQU (0x1:SHL:2) ;- (MC) Lock Error
AT91C_MC_PROGE            EQU (0x1:SHL:3) ;- (MC) Programming Error
AT91C_MC_NEBP             EQU (0x1:SHL:7) ;- (MC) No Erase Before Programming
AT91C_MC_FWS              EQU (0x3:SHL:8) ;- (MC) Flash Wait State
AT91C_MC_FWS_0FWS         EQU (0x0:SHL:8) ;- (MC) 1 cycle for Read, 2 for Write operations
AT91C_MC_FWS_1FWS         EQU (0x1:SHL:8) ;- (MC) 2 cycles for Read, 3 for Write operations
AT91C_MC_FWS_2FWS         EQU (0x2:SHL:8) ;- (MC) 3 cycles for Read, 4 for Write operations
AT91C_MC_FWS_3FWS         EQU (0x3:SHL:8) ;- (MC) 4 cycles for Read, 4 for Write operations
AT91C_MC_FMCN             EQU (0xFF:SHL:16) ;- (MC) Flash Microsecond Cycle Number
;- -------- MC_FCR : (MC Offset: 0x64) MC Flash Command Register -------- 
AT91C_MC_FCMD             EQU (0xF:SHL:0) ;- (MC) Flash Command
AT91C_MC_FCMD_START_PROG  EQU (0x1) ;- (MC) Starts the programming of th epage specified by PAGEN.
AT91C_MC_FCMD_LOCK        EQU (0x2) ;- (MC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
AT91C_MC_FCMD_PROG_AND_LOCK EQU (0x3) ;- (MC) The lock sequence automatically happens after the programming sequence is completed.
AT91C_MC_FCMD_UNLOCK      EQU (0x4) ;- (MC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN.
AT91C_MC_FCMD_ERASE_ALL   EQU (0x8) ;- (MC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled.
AT91C_MC_FCMD_SET_GP_NVM  EQU (0xB) ;- (MC) Set General Purpose NVM bits.
AT91C_MC_FCMD_CLR_GP_NVM  EQU (0xD) ;- (MC) Clear General Purpose NVM bits.
AT91C_MC_FCMD_SET_SECURITY EQU (0xF) ;- (MC) Set Security Bit.
AT91C_MC_PAGEN            EQU (0x3FF:SHL:8) ;- (MC) Page Number
AT91C_MC_KEY              EQU (0xFF:SHL:24) ;- (MC) Writing Protect Key
;- -------- MC_FSR : (MC Offset: 0x68) MC Flash Command Register -------- 
AT91C_MC_SECURITY         EQU (0x1:SHL:4) ;- (MC) Security Bit Status
AT91C_MC_GPNVM0           EQU (0x1:SHL:8) ;- (MC) Sector 0 Lock Status
AT91C_MC_GPNVM1           EQU (0x1:SHL:9) ;- (MC) Sector 1 Lock Status
AT91C_MC_GPNVM2           EQU (0x1:SHL:10) ;- (MC) Sector 2 Lock Status
AT91C_MC_GPNVM3           EQU (0x1:SHL:11) ;- (MC) Sector 3 Lock Status
AT91C_MC_GPNVM4           EQU (0x1:SHL:12) ;- (MC) Sector 4 Lock Status
AT91C_MC_GPNVM5           EQU (0x1:SHL:13) ;- (MC) Sector 5 Lock Status
AT91C_MC_GPNVM6           EQU (0x1:SHL:14) ;- (MC) Sector 6 Lock Status
AT91C_MC_GPNVM7           EQU (0x1:SHL:15) ;- (MC) Sector 7 Lock Status
AT91C_MC_LOCKS0           EQU (0x1:SHL:16) ;- (MC) Sector 0 Lock Status
AT91C_MC_LOCKS1           EQU (0x1:SHL:17) ;- (MC) Sector 1 Lock Status
AT91C_MC_LOCKS2           EQU (0x1:SHL:18) ;- (MC) Sector 2 Lock Status
AT91C_MC_LOCKS3           EQU (0x1:SHL:19) ;- (MC) Sector 3 Lock Status
AT91C_MC_LOCKS4           EQU (0x1:SHL:20) ;- (MC) Sector 4 Lock Status
AT91C_MC_LOCKS5           EQU (0x1:SHL:21) ;- (MC) Sector 5 Lock Status
AT91C_MC_LOCKS6           EQU (0x1:SHL:22) ;- (MC) Sector 6 Lock Status
AT91C_MC_LOCKS7           EQU (0x1:SHL:23) ;- (MC) Sector 7 Lock Status
AT91C_MC_LOCKS8           EQU (0x1:SHL:24) ;- (MC) Sector 8 Lock Status
AT91C_MC_LOCKS9           EQU (0x1:SHL:25) ;- (MC) Sector 9 Lock Status
AT91C_MC_LOCKS10          EQU (0x1:SHL:26) ;- (MC) Sector 10 Lock Status
AT91C_MC_LOCKS11          EQU (0x1:SHL:27) ;- (MC) Sector 11 Lock Status
AT91C_MC_LOCKS12          EQU (0x1:SHL:28) ;- (MC) Sector 12 Lock Status
AT91C_MC_LOCKS13          EQU (0x1:SHL:29) ;- (MC) Sector 13 Lock Status
AT91C_MC_LOCKS14          EQU (0x1:SHL:30) ;- (MC) Sector 14 Lock Status
AT91C_MC_LOCKS15          EQU (0x1:SHL:31) ;- (MC) Sector 15 Lock Status

;- *****************************************************************************
;-              SOFTWARE API DEFINITION  FOR Serial Parallel Interface
;- *****************************************************************************
                ^ 0 ;- AT91S_SPI
SPI_CR          #  4 ;- Control Register
SPI_MR          #  4 ;- Mode Register
SPI_RDR         #  4 ;- Receive Data Register
SPI_TDR         #  4 ;- Transmit Data Register
SPI_SR          #  4 ;- Status Register
SPI_IER         #  4 ;- Interrupt Enable Register
SPI_IDR         #  4 ;- Interrupt Disable Register
SPI_IMR         #  4 ;- Interrupt Mask Register
                # 16 ;- Reserved
SPI_CSR         # 16 ;- Chip Select Register
                # 192 ;- Reserved
SPI_RPR         #  4 ;- Receive Pointer Register
SPI_RCR         #  4 ;- Receive Counter Register
SPI_TPR         #  4 ;- Transmit Pointer Register
SPI_TCR         #  4 ;- Transmit Counter Register
SPI_RNPR        #  4 ;- Receive Next Pointer Register
SPI_RNCR        #  4 ;- Receive Next Counter Register
SPI_TNPR        #  4 ;- Transmit Next Pointer Register
SPI_TNCR        #  4 ;- Transmit Next Counter Register
SPI_PTCR        #  4 ;- PDC Transfer Control Register
SPI_PTSR        #  4 ;- PDC Transfer Status Register
;- -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- 
AT91C_SPI_SPIEN           EQU (0x1:SHL:0) ;- (SPI) SPI Enable
AT91C_SPI_SPIDIS          EQU (0x1:SHL:1) ;- (SPI) SPI Disable
AT91C_SPI_SWRST           EQU (0x1:SHL:7) ;- (SPI) SPI Software reset
AT91C_SPI_LASTXFER        EQU (0x1:SHL:24) ;- (SPI) SPI Last Transfer
;- -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- 
AT91C_SPI_MSTR            EQU (0x1:SHL:0) ;- (SPI) Master/Slave Mode
AT91C_SPI_PS              EQU (0x1:SHL:1) ;- (SPI) Peripheral Select
AT91C_SPI_PS_FIXED        EQU (0x0:SHL:1) ;- (SPI) Fixed Peripheral Select
AT91C_SPI_PS_VARIABLE     EQU (0x1:SHL:1) ;- (SPI) Variable Peripheral Select
AT91C_SPI_PCSDEC          EQU (0x1:SHL:2) ;- (SPI) Chip Select Decode
AT91C_SPI_FDIV            EQU (0x1:SHL:3) ;- (SPI) Clock Selection
AT91C_SPI_MODFDIS         EQU (0x1:SHL:4) ;- (SPI) Mode Fault Detection
AT91C_SPI_LLB             EQU (0x1:SHL:7) ;- (SPI) Clock Selection
AT91C_SPI_PCS             EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select
AT91C_SPI_DLYBCS          EQU (0xFF:SHL:24) ;- (SPI) Delay Between Chip Selects
;- -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- 
AT91C_SPI_RD              EQU (0xFFFF:SHL:0) ;- (SPI) Receive Data
AT91C_SPI_RPCS            EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status
;- -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- 
AT91C_SPI_TD              EQU (0xFFFF:SHL:0) ;- (SPI) Transmit Data
AT91C_SPI_TPCS            EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status
;- -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- 
AT91C_SPI_RDRF            EQU (0x1:SHL:0) ;- (SPI) Receive Data Register Full
AT91C_SPI_TDRE            EQU (0x1:SHL:1) ;- (SPI) Transmit Data Register Empty
AT91C_SPI_MODF            EQU (0x1:SHL:2) ;- (SPI) Mode Fault Error
AT91C_SPI_OVRES           EQU (0x1:SHL:3) ;- (SPI) Overrun Error Status
AT91C_SPI_ENDRX           EQU (0x1:SHL:4) ;- (SPI) End of Receiver Transfer
AT91C_SPI_ENDTX           EQU (0x1:SHL:5) ;- (SPI) End of Receiver Transfer
AT91C_SPI_RXBUFF          EQU (0x1:SHL:6) ;- (SPI) RXBUFF Interrupt
AT91C_SPI_TXBUFE          EQU (0x1:SHL:7) ;- (SPI) TXBUFE Interrupt
AT91C_SPI_NSSR            EQU (0x1:SHL:8) ;- (SPI) NSSR Interrupt
AT91C_SPI_TXEMPTY         EQU (0x1:SHL:9) ;- (SPI) TXEMPTY Interrupt
AT91C_SPI_SPIENS          EQU (0x1:SHL:16) ;- (SPI) Enable Status
;- -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- 
;- -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- 
;- -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- 
;- -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- 
AT91C_SPI_CPOL            EQU (0x1:SHL:0) ;- (SPI) Clock Polarity
AT91C_SPI_NCPHA           EQU (0x1:SHL:1) ;- (SPI) Clock Phase
AT91C_SPI_CSAAT           EQU (0x1:SHL:3) ;- (SPI) Chip Select Active After Transfer
AT91C_SPI_BITS            EQU (0xF:SHL:4) ;- (SPI) Bits Per Transfer
AT91C_SPI_BITS_8          EQU (0x0:SHL:4) ;- (SPI) 8 Bits Per transfer
AT91C_SPI_BITS_9          EQU (0x1:SHL:4) ;- (SPI) 9 Bits Per transfer
AT91C_SPI_BITS_10         EQU (0x2:SHL:4) ;- (SPI) 10 Bits Per transfer
AT91C_SPI_BITS_11         EQU (0x3:SHL:4) ;- (SPI) 11 Bits Per transfer
AT91C_SPI_BITS_12         EQU (0x4:SHL:4) ;- (SPI) 12 Bits Per transfer
AT91C_SPI_BITS_13         EQU (0x5:SHL:4) ;- (SPI) 13 Bits Per transfer
AT91C_SPI_BITS_14         EQU (0x6:SHL:4) ;- (SPI) 14 Bits Per transfer
AT91C_SPI_BITS_15         EQU (0x7:SHL:4) ;- (SPI) 15 Bits Per transfer
AT91C_SPI_BITS_16         EQU (0x8:SHL:4) ;- (SPI) 16 Bits Per transfer
AT91C_SPI_SCBR            EQU (0xFF:SHL:8) ;- (SPI) Serial Clock Baud Rate
AT91C_SPI_DLYBS           EQU (0xFF:SHL:16) ;- (SPI) Delay Before SPCK
AT91C_SPI_DLYBCT          EQU (0xFF:SHL:24) ;- (SPI) Delay Between Consecutive Transfers

;- *****************************************************************************
;-              SOFTWARE API DEFINITION  FOR Usart
;- *****************************************************************************
                ^ 0 ;- AT91S_USART
US_CR           #  4 ;- Control Register
US_MR           #  4 ;- Mode Register
US_IER          #  4 ;- Interrupt Enable Register
US_IDR          #  4 ;- Interrupt Disable Register
US_IMR          #  4 ;- Interrupt Mask Register
US_CSR          #  4 ;- Channel Status Register
US_RHR          #  4 ;- Receiver Holding Register
US_THR          #  4 ;- Transmitter Holding Register
US_BRGR         #  4 ;- Baud Rate Generator Register
US_RTOR         #  4 ;- Receiver Time-out Register
US_TTGR         #  4 ;- Transmitter Time-guard Register
                # 20 ;- Reserved