#include "C8051F040.h"

#define uchar unsigned char
#define uint unsigned int
void os_init();
void port_init();
void pca_init();
sbit led=P1^6;
void UART_Init();
void SMBus_Init();
void SPI_Init();
int m;
/***********************************************************************
*
*主函數
***********************************************************************/
void main()
{  
   WDTCN     = 0xDE;
   WDTCN     = 0xAD;

   os_init();
   port_init();
   pca_init();

   EIE1      = 0x08;
   IE        = 0x80;  

   while(1)
   {
   }
}
/**********************************************************************
*
*端口初始化函數
***********************************************************************/
void port_init()
{
   SFRPAGE   = CONFIG_PAGE;
    P1MDIN    = 0x00;
    XBR0      = 0x27;
    XBR2      = 0x40;
	P1MDOUT   = 0x40;
}


/**********************************************************************
*
*系統時鐘初始化函數,選擇外部22.1184MHZ晶振頻率
***********************************************************************/
void os_init()
{
    uint i;
    SFRPAGE   = CONFIG_PAGE;
    OSCXCN    = 0x67;
    for (i = 0; i < 3000; i++);  // Wait 1ms for initialization
    while ((OSCXCN & 0x80) == 0);
    CLKSEL    = 0x01;

}
/**********************************************************************
*
*可編程邏輯陣列初始化函數
***********************************************************************/
void pca_init()
{
    SFRPAGE   = PCA0_PAGE;
//    PCA0CN    = 0x40;				            //PCA使能
    PCA0MD    = 0x81;							//
    PCA0CPM0  = 0x11;		                  	//模塊0負沿捕捉--P2.0
    PCA0CPM1  = 0x11;							//模塊1負沿捕捉--P2.1
    PCA0CPM2  = 0x11;							//模塊2負沿捕捉--P2.2
    PCA0CPM3  = 0x11;							//模塊3負沿捕捉--P2.3

}
void pca_isp() interrupt 9
{SFRPAGE   = PCA0_PAGE;
 if(CCF0==1)
	  { led=~led;
    	SFRPAGE   = PCA0_PAGE;
		CCF0 = 0;		            //清捕捉中斷標志
	   }
	if(CCF1==1)
	  { led=~led;
        SFRPAGE   = PCA0_PAGE;
		CCF1 = 0;		            //清捕捉中斷標志
	   }
	if(CCF2==1)
	  { led=~led;
    	 SFRPAGE   = PCA0_PAGE;
		CCF2 = 0;		            //清捕捉中斷標志
	   }
	if(CCF3==1)
	  { led=~led;
      SFRPAGE   = PCA0_PAGE;
		CCF3 = 0;		            //清捕捉中斷標志
	   } 
}