?? at91sam7s64.h
字號:
#define AT91C_ADC_TRGSEL_TIOA2 ((unsigned int) 0x2 << 1) // (ADC) Selected TRGSEL = TIAO2
#define AT91C_ADC_TRGSEL_TIOA3 ((unsigned int) 0x3 << 1) // (ADC) Selected TRGSEL = TIAO3
#define AT91C_ADC_TRGSEL_TIOA4 ((unsigned int) 0x4 << 1) // (ADC) Selected TRGSEL = TIAO4
#define AT91C_ADC_TRGSEL_TIOA5 ((unsigned int) 0x5 << 1) // (ADC) Selected TRGSEL = TIAO5
#define AT91C_ADC_TRGSEL_EXT ((unsigned int) 0x6 << 1) // (ADC) Selected TRGSEL = External Trigger
#define AT91C_ADC_LOWRES ((unsigned int) 0x1 << 4) // (ADC) Resolution.
#define AT91C_ADC_LOWRES_10_BIT ((unsigned int) 0x0 << 4) // (ADC) 10-bit resolution
#define AT91C_ADC_LOWRES_8_BIT ((unsigned int) 0x1 << 4) // (ADC) 8-bit resolution
#define AT91C_ADC_SLEEP ((unsigned int) 0x1 << 5) // (ADC) Sleep Mode
#define AT91C_ADC_SLEEP_NORMAL_MODE ((unsigned int) 0x0 << 5) // (ADC) Normal Mode
#define AT91C_ADC_SLEEP_MODE ((unsigned int) 0x1 << 5) // (ADC) Sleep Mode
#define AT91C_ADC_PRESCAL ((unsigned int) 0x3F << 8) // (ADC) Prescaler rate selection
#define AT91C_ADC_STARTUP ((unsigned int) 0x1F << 16) // (ADC) Startup Time
#define AT91C_ADC_SHTIM ((unsigned int) 0xF << 24) // (ADC) Sample & Hold Time
// -------- ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register --------
#define AT91C_ADC_CH0 ((unsigned int) 0x1 << 0) // (ADC) Channel 0
#define AT91C_ADC_CH1 ((unsigned int) 0x1 << 1) // (ADC) Channel 1
#define AT91C_ADC_CH2 ((unsigned int) 0x1 << 2) // (ADC) Channel 2
#define AT91C_ADC_CH3 ((unsigned int) 0x1 << 3) // (ADC) Channel 3
#define AT91C_ADC_CH4 ((unsigned int) 0x1 << 4) // (ADC) Channel 4
#define AT91C_ADC_CH5 ((unsigned int) 0x1 << 5) // (ADC) Channel 5
#define AT91C_ADC_CH6 ((unsigned int) 0x1 << 6) // (ADC) Channel 6
#define AT91C_ADC_CH7 ((unsigned int) 0x1 << 7) // (ADC) Channel 7
// -------- ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register --------
// -------- ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register --------
// -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register --------
#define AT91C_ADC_EOC0 ((unsigned int) 0x1 << 0) // (ADC) End of Conversion
#define AT91C_ADC_EOC1 ((unsigned int) 0x1 << 1) // (ADC) End of Conversion
#define AT91C_ADC_EOC2 ((unsigned int) 0x1 << 2) // (ADC) End of Conversion
#define AT91C_ADC_EOC3 ((unsigned int) 0x1 << 3) // (ADC) End of Conversion
#define AT91C_ADC_EOC4 ((unsigned int) 0x1 << 4) // (ADC) End of Conversion
#define AT91C_ADC_EOC5 ((unsigned int) 0x1 << 5) // (ADC) End of Conversion
#define AT91C_ADC_EOC6 ((unsigned int) 0x1 << 6) // (ADC) End of Conversion
#define AT91C_ADC_EOC7 ((unsigned int) 0x1 << 7) // (ADC) End of Conversion
#define AT91C_ADC_OVRE0 ((unsigned int) 0x1 << 8) // (ADC) Overrun Error
#define AT91C_ADC_OVRE1 ((unsigned int) 0x1 << 9) // (ADC) Overrun Error
#define AT91C_ADC_OVRE2 ((unsigned int) 0x1 << 10) // (ADC) Overrun Error
#define AT91C_ADC_OVRE3 ((unsigned int) 0x1 << 11) // (ADC) Overrun Error
#define AT91C_ADC_OVRE4 ((unsigned int) 0x1 << 12) // (ADC) Overrun Error
#define AT91C_ADC_OVRE5 ((unsigned int) 0x1 << 13) // (ADC) Overrun Error
#define AT91C_ADC_OVRE6 ((unsigned int) 0x1 << 14) // (ADC) Overrun Error
#define AT91C_ADC_OVRE7 ((unsigned int) 0x1 << 15) // (ADC) Overrun Error
#define AT91C_ADC_DRDY ((unsigned int) 0x1 << 16) // (ADC) Data Ready
#define AT91C_ADC_GOVRE ((unsigned int) 0x1 << 17) // (ADC) General Overrun
#define AT91C_ADC_ENDRX ((unsigned int) 0x1 << 18) // (ADC) End of Receiver Transfer
#define AT91C_ADC_RXBUFF ((unsigned int) 0x1 << 19) // (ADC) RXBUFF Interrupt
// -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register --------
#define AT91C_ADC_LDATA ((unsigned int) 0x3FF << 0) // (ADC) Last Data Converted
// -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register --------
// -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register --------
// -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register --------
// -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 --------
#define AT91C_ADC_DATA ((unsigned int) 0x3FF << 0) // (ADC) Converted Data
// -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 --------
// -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 --------
// -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 --------
// -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 --------
// -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 --------
// -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 --------
// -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 --------
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface
// *****************************************************************************
typedef struct _AT91S_SSC {
AT91_REG SSC_CR; // Control Register
AT91_REG SSC_CMR; // Clock Mode Register
AT91_REG Reserved0[2]; //
AT91_REG SSC_RCMR; // Receive Clock ModeRegister
AT91_REG SSC_RFMR; // Receive Frame Mode Register
AT91_REG SSC_TCMR; // Transmit Clock Mode Register
AT91_REG SSC_TFMR; // Transmit Frame Mode Register
AT91_REG SSC_RHR; // Receive Holding Register
AT91_REG SSC_THR; // Transmit Holding Register
AT91_REG Reserved1[2]; //
AT91_REG SSC_RSHR; // Receive Sync Holding Register
AT91_REG SSC_TSHR; // Transmit Sync Holding Register
AT91_REG SSC_RC0R; // Receive Compare 0 Register
AT91_REG SSC_RC1R; // Receive Compare 1 Register
AT91_REG SSC_SR; // Status Register
AT91_REG SSC_IER; // Interrupt Enable Register
AT91_REG SSC_IDR; // Interrupt Disable Register
AT91_REG SSC_IMR; // Interrupt Mask Register
AT91_REG Reserved2[44]; //
AT91_REG SSC_RPR; // Receive Pointer Register
AT91_REG SSC_RCR; // Receive Counter Register
AT91_REG SSC_TPR; // Transmit Pointer Register
AT91_REG SSC_TCR; // Transmit Counter Register
AT91_REG SSC_RNPR; // Receive Next Pointer Register
AT91_REG SSC_RNCR; // Receive Next Counter Register
AT91_REG SSC_TNPR; // Transmit Next Pointer Register
AT91_REG SSC_TNCR; // Transmit Next Counter Register
AT91_REG SSC_PTCR; // PDC Transfer Control Register
AT91_REG SSC_PTSR; // PDC Transfer Status Register
} AT91S_SSC, *AT91PS_SSC;
// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register --------
#define AT91C_SSC_RXEN ((unsigned int) 0x1 << 0) // (SSC) Receive Enable
#define AT91C_SSC_RXDIS ((unsigned int) 0x1 << 1) // (SSC) Receive Disable
#define AT91C_SSC_TXEN ((unsigned int) 0x1 << 8) // (SSC) Transmit Enable
#define AT91C_SSC_TXDIS ((unsigned int) 0x1 << 9) // (SSC) Transmit Disable
#define AT91C_SSC_SWRST ((unsigned int) 0x1 << 15) // (SSC) Software Reset
// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register --------
#define AT91C_SSC_CKS ((unsigned int) 0x3 << 0) // (SSC) Receive/Transmit Clock Selection
#define AT91C_SSC_CKS_DIV ((unsigned int) 0x0) // (SSC) Divided Clock
#define AT91C_SSC_CKS_TK ((unsigned int) 0x1) // (SSC) TK Clock signal
#define AT91C_SSC_CKS_RK ((unsigned int) 0x2) // (SSC) RK pin
#define AT91C_SSC_CKO ((unsigned int) 0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection
#define AT91C_SSC_CKO_NONE ((unsigned int) 0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only
#define AT91C_SSC_CKO_CONTINOUS ((unsigned int) 0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output
#define AT91C_SSC_CKO_DATA_TX ((unsigned int) 0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output
#define AT91C_SSC_CKI ((unsigned int) 0x1 << 5) // (SSC) Receive/Transmit Clock Inversion
#define AT91C_SSC_CKG ((unsigned int) 0x3 << 6) // (SSC) Receive/Transmit Clock Gating Selection
#define AT91C_SSC_CKG_NONE ((unsigned int) 0x0 << 6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock
#define AT91C_SSC_CKG_LOW ((unsigned int) 0x1 << 6) // (SSC) Receive/Transmit Clock enabled only if RF Low
#define AT91C_SSC_CKG_HIGH ((unsigned int) 0x2 << 6) // (SSC) Receive/Transmit Clock enabled only if RF High
#define AT91C_SSC_START ((unsigned int) 0xF << 8) // (SSC) Receive/Transmit Start Selection
#define AT91C_SSC_START_CONTINOUS ((unsigned int) 0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data.
#define AT91C_SSC_START_TX ((unsigned int) 0x1 << 8) // (SSC) Transmit/Receive start
#define AT91C_SSC_START_LOW_RF ((unsigned int) 0x2 << 8) // (SSC) Detection of a low level on RF input
#define AT91C_SSC_START_HIGH_RF ((unsigned int) 0x3 << 8) // (SSC) Detection of a high level on RF input
#define AT91C_SSC_START_FALL_RF ((unsigned int) 0x4 << 8) // (SSC) Detection of a falling edge on RF input
#define AT91C_SSC_START_RISE_RF ((unsigned int) 0x5 << 8) // (SSC) Detection of a rising edge on RF input
#define AT91C_SSC_START_LEVEL_RF ((unsigned int) 0x6 << 8) // (SSC) Detection of any level change on RF input
#define AT91C_SSC_START_EDGE_RF ((unsigned int) 0x7 << 8) // (SSC) Detection of any edge on RF input
#define AT91C_SSC_START_0 ((unsigned int) 0x8 << 8) // (SSC) Compare 0
#define AT91C_SSC_STOP ((unsigned int) 0x1 << 12) // (SSC) Receive Stop Selection
#define AT91C_SSC_STTOUT ((unsigned int) 0x1 << 15) // (SSC) Receive/Transmit Start Output Selection
#define AT91C_SSC_STTDLY ((unsigned int) 0xFF << 16) // (SSC) Receive/Transmit Start Delay
#define AT91C_SSC_PERIOD ((unsigned int) 0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection
// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register --------
#define AT91C_SSC_DATLEN ((unsigned int) 0x1F << 0) // (SSC) Data Length
#define AT91C_SSC_LOOP ((unsigned int) 0x1 << 5) // (SSC) Loop Mode
#define AT91C_SSC_MSBF ((unsigned int) 0x1 << 7) // (SSC) Most Significant Bit First
#define AT91C_SSC_DATNB ((unsigned int) 0xF << 8) // (SSC) Data Number per Frame
#define AT91C_SSC_FSLEN ((unsigned int) 0xF << 16) // (SSC) Receive/Transmit Frame Sync length
#define AT91C_SSC_FSOS ((unsigned int) 0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection
#define AT91C_SSC_FSOS_NONE ((unsigned int) 0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only
#define AT91C_SSC_FSOS_NEGATIVE ((unsigned int) 0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse
#define AT91C_SSC_FSOS_POSITIVE ((unsigned int) 0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse
#define AT91C_SSC_FSOS_LOW ((unsigned int) 0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer
#define AT91C_SSC_FSOS_HIGH ((unsigned int) 0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer
#define AT91C_SSC_FSOS_TOGGLE ((unsigned int) 0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer
#define AT91C_SSC_FSEDGE ((unsigned int) 0x1 << 24) // (SSC) Frame Sync Edge Detection
// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register --------
// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register --------
#define AT91C_SSC_DATDEF ((unsigned int) 0x1 << 5) // (SSC) Data Default Value
#define AT91C_SSC_FSDEN ((unsigned int) 0x1 << 23) // (SSC) Frame Sync Data Enable
// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register --------
#define AT91C_SSC_TXRDY ((unsigned int) 0x1 << 0) // (SSC) Transmit Ready
#define AT91C_SSC_TXEMPTY ((unsigned int) 0x1 << 1) // (SSC) Transmit Empty
#define AT91C_SSC_ENDTX ((unsigned int) 0x1 << 2) // (SSC) End Of Transmission
#define AT91C_SSC_TXBUFE ((unsigned int) 0x1 << 3) // (SSC) Transmit Buffer Empty
#define AT91C_SSC_RXRDY ((unsigned int) 0x1 << 4) // (SSC) Receive Ready
#define AT91C_SSC_OVRUN ((unsigned int) 0x1 << 5) // (SSC) Receive Overrun
#define AT91C_SSC_ENDRX ((unsigned int) 0x1 << 6) // (SSC) End of Reception
#define AT91C_SSC_RXBUFF ((unsigned int) 0x1 << 7) // (SSC) Receive Buffer Full
#define AT91C_SSC_CP0 ((unsigned int) 0x1 << 8) // (SSC) Compare 0
#define AT91C_SSC_CP1 ((unsigned int) 0x1 << 9) // (SSC) Compare 1
#define AT91C_SSC_TXSYN ((unsigned int) 0x1 << 10) // (SSC) Transmit Sync
#define AT91C_SSC_RXSYN ((unsigned int) 0x1 << 11) // (SSC) Receive Sync
#define AT91C_SSC_TXENA ((unsigned int) 0x1 << 16) // (SSC) Transmit Enable
#define AT91C_SSC_RXENA ((unsigned int) 0x1 << 17) // (SSC) Receive Enable
// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register --------
// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register --------
// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register --------
// *****************************************************************************
// SOFTWARE API DEFINITION FOR Usart
// *****************************************************************************
typedef struct _AT91S_USART {
AT91_REG US_CR; // Control Register
AT91_REG US_MR; // Mode Register
AT91_REG US_IER; // Interrupt Enable Register
AT91_REG US_IDR; // Interrupt Disable Register
AT91_REG US_IMR; // Interrupt Mask Register
AT91_REG US_CSR; // Channel Status Register
AT91_REG US_RHR; // Receiver Holding Register
AT91_REG US_THR; // Transmitter Holding Register
AT91_REG US_BRGR; // Baud Rate Generator Register
AT91_REG US_RTOR; // Receiver Time-out Register
AT91_REG US_TTGR; // Transmitter Time-guard Register
AT91_REG Reserved0[5]; //
AT91_REG US_FIDI; // FI_DI_Ratio Register
AT91_REG?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -