?? wlanup
字號:
#-------------------------- # Load wireless lan driver #--------------------------/sbin/insmod -f rtl8180_24x.ocase "$1" in ap) echo "ap" #------------------------------------------ # Config AP mode # Assign SSID and operation channel. #------------------------------------------ /sbin/iwpriv wlan0 wlan_para ssid=BIAS /sbin/iwpriv wlan0 wlan_para channel=2 ;; infra) echo "infra" #------------------------------------------ # Config infrastructure mode # Assign network type and desired SSID. #------------------------------------------ /sbin/iwpriv wlan0 wlan_para networktype=infra /sbin/iwpriv wlan0 wlan_para ssid2scan=NAP_WPA ;; adhoc) echo "adhoc" #------------------------------------------ # Config infrastructure mode # Assign network type and desired SSID. # 'ssid' and 'channel' are the default setting # and meaningful if this is the first station # in an IBSS. #------------------------------------------ /sbin/iwpriv wlan0 wlan_para networktype=adhoc /sbin/iwpriv wlan0 wlan_para ssid2scan=aaaaa /sbin/iwpriv wlan0 wlan_para ssid=A_WPA /sbin/iwpriv wlan0 wlan_para channel=2 ;; *) /sbin/rmmod rtl8180_24x echo "Usage: $0 {ap | infra | adhoc}" exit 1esac #-------------------------- # Config WEP mode #--------------------------/sbin/iwpriv wlan0 wlan_para encmode=off/sbin/iwpriv wlan0 wlan_para wepmode=off#/sbin/iwpriv wlan0 wlan_para encmode=wep,wepmode=wep40#/sbin/iwpriv wlan0 wlan_para wepmode=wep40,wepdkeyid=0,wepkey40_1=1111111111 #-------------------------- # Config debugging message #--------------------------/sbin/iwpriv wlan0 msglevel 0 #-------------------------- # Enable wireless lan driver #--------------------------/sbin/iwpriv wlan0 enable #-------------------------- # Configure wlan0 IP address #--------------------------/sbin/ifconfig wlan0 192.168.1.180echo "$(/sbin/ifconfig wlan0)"?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -