//*****************************************************************************
//
// sysctl.h - Prototypes for the system control driver.
//
// Copyright (c) 2005-2007 Luminary Micro, Inc.  All rights reserved.
// 
// Software License Agreement
// 
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
// 
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws.  All rights are reserved.  Any use in violation
// of the foregoing restrictions may subject the user to criminal sanctions
// under applicable laws, as well as to civil liability for the breach of the
// terms and conditions of this license.
// 
// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
// 
// This is part of revision 1408 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************

#ifndef __SYSCTL_H__
#define __SYSCTL_H__

#ifdef __cplusplus
extern "C"
{
#endif

//*****************************************************************************
//
// The following are values that can be passed to the
// SysCtlPeripheralPresent(), SysCtlPeripheralEnable(),
// SysCtlPeripheralDisable(), and SysCtlPeripheralReset() APIs as the
// ulPeripheral parameter.  The peripherals in the fourth group (upper nibble
// is 3) can only be used with the SysCtlPeripheralPresent() API.
//
//*****************************************************************************
#define SYSCTL_PERIPH_PWM       0x00100010  // PWM
#define SYSCTL_PERIPH_ADC       0x00100001  // ADC
#define SYSCTL_PERIPH_HIBERNATE 0x00000040  // Hibernation module
#define SYSCTL_PERIPH_WDOG      0x00000008  // Watchdog
#define SYSCTL_PERIPH_CAN0      0x00100100  // CAN 0
#define SYSCTL_PERIPH_CAN1      0x00100200  // CAN 1
#define SYSCTL_PERIPH_UART0     0x10000001  // UART 0
#define SYSCTL_PERIPH_UART1     0x10000002  // UART 1
#define SYSCTL_PERIPH_UART2     0x10000004  // UART 2
#define SYSCTL_PERIPH_SSI       0x10000010  // SSI
#define SYSCTL_PERIPH_SSI0      0x10000010  // SSI 0
#define SYSCTL_PERIPH_SSI1      0x10000020  // SSI 1
#define SYSCTL_PERIPH_QEI       0x10000100  // QEI
#define SYSCTL_PERIPH_QEI0      0x10000100  // QEI 0
#define SYSCTL_PERIPH_QEI1      0x10000200  // QEI 1
#define SYSCTL_PERIPH_I2C       0x10001000  // I2C
#define SYSCTL_PERIPH_I2C0      0x10001000  // I2C 0
#define SYSCTL_PERIPH_I2C1      0x10004000  // I2C 1
#define SYSCTL_PERIPH_TIMER0    0x10100001  // Timer 0
#define SYSCTL_PERIPH_TIMER1    0x10100002  // Timer 1
#define SYSCTL_PERIPH_TIMER2    0x10100004  // Timer 2
#define SYSCTL_PERIPH_TIMER3    0x10100008  // Timer 3
#define SYSCTL_PERIPH_COMP0     0x10100100  // Analog comparator 0
#define SYSCTL_PERIPH_COMP1     0x10100200  // Analog comparator 1
#define SYSCTL_PERIPH_COMP2     0x10100400  // Analog comparator 2
#define SYSCTL_PERIPH_GPIOA     0x20000001  // GPIO A
#define SYSCTL_PERIPH_GPIOB     0x20000002  // GPIO B
#define SYSCTL_PERIPH_GPIOC     0x20000004  // GPIO C
#define SYSCTL_PERIPH_GPIOD     0x20000008  // GPIO D
#define SYSCTL_PERIPH_GPIOE     0x20000010  // GPIO E
#define SYSCTL_PERIPH_GPIOF     0x20000020  // GPIO F
#define SYSCTL_PERIPH_GPIOG     0x20000040  // GPIO G
#define SYSCTL_PERIPH_GPIOH     0x20000080  // GPIO H
#define SYSCTL_PERIPH_ETH       0x20105000  // ETH
#define SYSCTL_PERIPH_MPU       0x30000080  // Cortex M3 MPU
#define SYSCTL_PERIPH_TEMP      0x30000020  // Temperature sensor
#define SYSCTL_PERIPH_PLL       0x30000010  // PLL

//*****************************************************************************
//
// The following are values that can be passed to the SysCtlPinPresent() API
// as the ulPin parameter.
//
//*****************************************************************************
#define SYSCTL_PIN_PWM0         0x00000001  // PWM0 pin
#define SYSCTL_PIN_PWM1         0x00000002  // PWM1 pin
#define SYSCTL_PIN_PWM2         0x00000004  // PWM2 pin
#define SYSCTL_PIN_PWM3         0x00000008  // PWM3 pin
#define SYSCTL_PIN_PWM4         0x00000010  // PWM4 pin
#define SYSCTL_PIN_PWM5         0x00000020  // PWM5 pin
#define SYSCTL_PIN_C0MINUS      0x00000040  // C0- pin
#define SYSCTL_PIN_C0PLUS       0x00000080  // C0+ pin
#define SYSCTL_PIN_C0O          0x00000100  // C0o pin
#define SYSCTL_PIN_C1MINUS      0x00000200  // C1- pin
#define SYSCTL_PIN_C1PLUS       0x00000400  // C1+ pin
#define SYSCTL_PIN_C1O          0x00000800  // C1o pin
#define SYSCTL_PIN_C2MINUS      0x00001000  // C2- pin
#define SYSCTL_PIN_C2PLUS       0x00002000  // C2+ pin
#define SYSCTL_PIN_C2O          0x00004000  // C2o pin
#define SYSCTL_PIN_MC_FAULT0    0x00008000  // MC0 Fault pin
#define SYSCTL_PIN_ADC0         0x00010000  // ADC0 pin
#define SYSCTL_PIN_ADC1         0x00020000  // ADC1 pin
#define SYSCTL_PIN_ADC2         0x00040000  // ADC2 pin
#define SYSCTL_PIN_ADC3         0x00080000  // ADC3 pin
#define SYSCTL_PIN_ADC4         0x00100000  // ADC4 pin
#define SYSCTL_PIN_ADC5         0x00200000  // ADC5 pin
#define SYSCTL_PIN_ADC6         0x00400000  // ADC6 pin
#define SYSCTL_PIN_ADC7         0x00800000  // ADC7 pin
#define SYSCTL_PIN_CCP0         0x01000000  // CCP0 pin
#define SYSCTL_PIN_CCP1         0x02000000  // CCP1 pin
#define SYSCTL_PIN_CCP2         0x04000000  // CCP2 pin
#define SYSCTL_PIN_CCP3         0x08000000  // CCP3 pin
#define SYSCTL_PIN_CCP4         0x10000000  // CCP4 pin
#define SYSCTL_PIN_CCP5         0x20000000  // CCP5 pin
#define SYSCTL_PIN_32KHZ        0x80000000  // 32kHz pin

//*****************************************************************************
//
// The following are values that can be passed to the SysCtlLDOSet() API as
// the ulVoltage value, or returned by the SysCtlLDOGet() API.
//
//*****************************************************************************
#define SYSCTL_LDO_2_25V        0x00000005  // LDO output of 2.25V
#define SYSCTL_LDO_2_30V        0x00000004  // LDO output of 2.30V
#define SYSCTL_LDO_2_35V        0x00000003  // LDO output of 2.35V
#define SYSCTL_LDO_2_40V        0x00000002  // LDO output of 2.40V
#define SYSCTL_LDO_2_45V        0x00000001  // LDO output of 2.45V
#define SYSCTL_LDO_2_50V        0x00000000  // LDO output of 2.50V
#define SYSCTL_LDO_2_55V        0x0000001f  // LDO output of 2.55V
#define SYSCTL_LDO_2_60V        0x0000001e  // LDO output of 2.60V
#define SYSCTL_LDO_2_65V        0x0000001d  // LDO output of 2.65V
#define SYSCTL_LDO_2_70V        0x0000001c  // LDO output of 2.70V
#define SYSCTL_LDO_2_75V        0x0000001b  // LDO output of 2.75V

//*****************************************************************************
//
// The following are values that can be passed to the SysCtlLDOConfigSet() API.
//
//*****************************************************************************
#define SYSCTL_LDOCFG_ARST      0x00000001  // Allow LDO failure to reset
#define SYSCTL_LDOCFG_NORST     0x00000000  // Do not reset on LDO failure

//*****************************************************************************
//
// The following are values that can be passed to the SysCtlIntEnable(),
// SysCtlIntDisable(), and SysCtlIntClear() APIs, or returned in the bit mask
// by the SysCtlIntStatus() API.