/******************** (C) COPYRIGHT 2006 STMicroelectronics ********************
* File Name          : 75x_ssp.c
* Author             : MCD Application Team
* Date First Issued  : 03/10/2006 
* Description        : This file provides all the SSP software functions.
********************************************************************************
* History:
* 07/17/2006 : V1.0
* 03/10/2006 : V0.1
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, 
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING 
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "75x_ssp.h"
#include "75x_mrcc.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/

/* SSP peripheral Enable */
#define SSP_Enable   0x0002
#define SSP_Disable  0xFFFD

/* SSP Loop Back Mode Enable */
#define SSP_LoopBackMode_Enable   0x0001
#define SSP_LoopBackMode_Disable  0xFFFE

/* SSP Flag Mask */
#define SSP_Flag_Mask  0x001F

/* SSP DMA transmit/ receive enable/disable Masks */
#define SSP0_DMA_TransmitEnable   0x0002
#define SSP0_DMA_TransmitDisable  0xFFFD
#define SSP0_DMA_ReceiveEnable    0x0001
#define SSP0_DMA_ReceiveDisable   0xFFFE

/* SSP Masks */
#define SSP_FrameFormat_Mask     0xFFCF
#define SSP_DataSize_Mask        0xFFF0
#define SSP_ClockRate_Mask       0x00FF
#define SSP_ClockPrescaler_Mask  0xFF00
#define SSP_SSI_Set_Mask         0x0020
#define SSP_SSI_Reset_Mask       0xFFDF


/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/*******************************************************************************
* Function Name  : SSP_DeInit
* Description    : Deinitializes the SSPx peripheral registers to their default
*                  reset values.
* Input          : SSPx: where x can be 0 or 1 to select the SSP peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void SSP_DeInit(SSP_TypeDef* SSPx)
{
  if(SSPx == SSP0)
  {
    /* Reset the SSP0 registers values*/
    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_SSP0,ENABLE);
    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_SSP0,DISABLE); 
  }
  else if (SSPx == SSP1)
  {
    /* Reset the SSP1 registers values*/
    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_SSP1,ENABLE);
    MRCC_PeripheralSWResetConfig(MRCC_Peripheral_SSP1,DISABLE); 
  } 
}

/*******************************************************************************
* Function Name  : SSP_Init
* Description    : Initializes the SSPx  peripheral according to the specified
*                  parameters in the SSP_InitTypeDef structure.
* Input          : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
*                  - SSP_InitStruct: pointer to a SSP_InitTypeDef structure that
*                    contains the configuration information for the specified SSP
*                    peripheral.
* Output         : None
* Return         : None
*******************************************************************************/
void SSP_Init(SSP_TypeDef* SSPx, SSP_InitTypeDef* SSP_InitStruct)
{ 
  /* Configure the Frame format */
  if(SSP_InitStruct->SSP_FrameFormat == SSP_FrameFormat_TI)
  {   
    /* Clear the FRF[1:0] bits */
    SSPx->CR0 &= SSP_FrameFormat_Mask;
    /* Set the TI frame format */
    SSPx->CR0 |= SSP_FrameFormat_TI;
  }
  else
  {
    /* Set the Motorola frame format */
    SSPx->CR0 &= SSP_FrameFormat_Motorola;
    /* Configure the Clock polarity */
    if(SSP_InitStruct->SSP_CPOL == SSP_CPOL_High)
    {   
      /* SCK is held high when no data is being transfered */    
      SSPx->CR0 |= SSP_CPOL_High;
    }
    else
    {
      /* SCK is held low when no data is being transfered */ 
      SSPx->CR0 &= SSP_CPOL_Low;
    }
    /* Configure the Clock Phase */
    if(SSP_InitStruct->SSP_CPHA == SSP_CPHA_2Edge)
    {    
      /* Data captured on second clock edge */   
      SSPx->CR0 |= SSP_CPHA_2Edge;
    }
    else
    {
      /* Data captured on first clock edge */
      SSPx->CR0 &= SSP_CPHA_1Edge;
    }
  }
  
  /* Configure the Mode */
  if(SSP_InitStruct->SSP_Mode == SSP_Mode_Slave)
  {  
    /* Set the slave mode */ 
    SSPx->CR1 |= SSP_Mode_Slave;
    /* Configure the Slave output */
    if(SSP_InitStruct->SSP_SlaveOutput == SSP_SlaveOutput_Disable)
    {  
      /* Slave output disabled */     
      SSPx->CR1 |= SSP_SlaveOutput_Disable;
    }
    else
    {
      /* Slave output enabled */     
      SSPx->CR1 &= SSP_SlaveOutput_Enable;
    }
    /* Configure the NSS pin */
    if(SSP_InitStruct->SSP_NSS == SSP_NSS_Soft)
    {  
      /* Slave selected by software through SSI bit */     
      SSPx->CR1 |= SSP_NSS_Soft;
      SSPx->CR1 &= SSP_SSI_Reset_Mask;
    }
    else
    {
      /* Slave selected by hardware through external SSpin */
      SSPx->CR1 &= SSP_NSS_Hard;
    }
    /* Configure the Clock rate and prescaler in TI slave mode */
    if(SSP_InitStruct->SSP_FrameFormat == SSP_FrameFormat_TI)
    { 
      /* Clear clock rate SCR[7:0] bits */
      SSPx->CR0 &= SSP_ClockRate_Mask; 
      /* Set the serial clock rate */
      SSPx->CR0 |= (SSP_InitStruct->SSP_ClockRate<<8);
      /* Clear clock prescaler CPSDVSR[7:0] bits */
      SSPx->PR &= SSP_ClockPrescaler_Mask;
      /* Set the serial clock prescaler */
      SSPx->PR |= SSP_InitStruct->SSP_ClockPrescaler;
    }
  }
  else
  {
    /* Set the master mode */
    SSPx->CR1 &= SSP_Mode_Master;
    /* Configure the NSS pin */
    if(SSP_InitStruct->SSP_NSS == SSP_NSS_Soft)
    {  
      /* Master selected by software through SSI bit */     
      SSPx->CR1 |= SSP_NSS_Soft;
      SSPx->CR1 |= SSP_SSI_Set_Mask;
    }
    else
    {
      /* Master selected by hardware through external SSpin */
      SSPx->CR1 &= SSP_NSS_Hard;
    }
    /* Clear clock rate SCR[7:0] bits */
    SSPx->CR0 &= SSP_ClockRate_Mask; 
    /* Set the serial clock rate */
    SSPx->CR0 |= (SSP_InitStruct->SSP_ClockRate<<8);
    /* Clear clock prescaler CPSDVSR[7:0] bits */
    SSPx->PR &= SSP_ClockPrescaler_Mask;
    /* Set the serial clock prescaler */
    SSPx->PR |= SSP_InitStruct->SSP_ClockPrescaler;
  }
  
  /* Clear data size DSS[3:0] bits */
  SSPx->CR0 &= SSP_DataSize_Mask;
  /* Set the data size */
  SSPx->CR0 |= SSP_InitStruct->SSP_DataSize;
}

/*******************************************************************************
* Function Name  : SSP_StructInit
* Description    : Fills each SSP_InitStruct member with its default value.
* Input          : SSP_InitStruct : pointer to a SSP_InitTypeDef structure
                   which will be initialized.
* Output         : None
* Return         : None
*******************************************************************************/
void SSP_StructInit(SSP_InitTypeDef* SSP_InitStruct)
{
  /* Initialize the SSP_FrameFormat member */
  SSP_InitStruct->SSP_FrameFormat = SSP_FrameFormat_Motorola;

  /* Initialize the SSP_Mode member */
  SSP_InitStruct->SSP_Mode = SSP_Mode_Master;

  /* Initialize the SSP_CPOL member */
  SSP_InitStruct->SSP_CPOL = SSP_CPOL_Low;

  /* Initialize the SSP_CPHA member */
  SSP_InitStruct->SSP_CPHA = SSP_CPHA_1Edge;

  /* Initialize the SSP_DataSize member */
  SSP_InitStruct->SSP_DataSize = SSP_DataSize_8b;
  
  /* Initialize the SSP_NSS  member */
  SSP_InitStruct->SSP_NSS = SSP_NSS_Hard;
  
  /* Initialize the SSP_SlaveOutput member */
  SSP_InitStruct->SSP_SlaveOutput = SSP_SlaveOutput_Enable;
  
  /* Initialize the SSP_ClockRate member */
  SSP_InitStruct->SSP_ClockRate = 0;
  
  /* Initialize the SSP_ClockPrescaler member */
  SSP_InitStruct->SSP_ClockPrescaler = 0;
}

/*******************************************************************************
* Function Name  : SSP_Cmd
* Description    : Enables or disables the specified SSP peripheral.
* Input          : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
*                  - NewState: new state of the SSPx peripheral. 
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void SSP_Cmd(SSP_TypeDef* SSPx, FunctionalState NewState)
{
  if(NewState == ENABLE)
  {
    /* Enable the SSP peripheral */
    SSPx->CR1 |= SSP_Enable;
  }
  else
  {
    /* Disable the SSP peripheral */
    SSPx->CR1 &= SSP_Disable;
  }
}

/*******************************************************************************
* Function Name  : SSP_ITConfig
* Description    : Enables or disables the specified SSP interrupts.
* Input          : - SSPx: where x can be 0 or 1 to select the SSP peripheral.
*                  - SSP_IT: specifies the SSP interrupts sources to be enabled
*                    or disabled. This parameter can be any combination of the
*                    following values:
*                         - SSP_IT_TxFifo: Transmit FIFO half empty or less interrupt 
*                         - SSP_IT_RxFifo: Receive FIFO half full or less interrupt 
*                         - SSP_IT_RxTimeOut: Receive timeout interrupt 
*                         - SSP_IT_RxOverrun: Receive overrun interrupt 
*                  - NewState: new state of the specified SSP interrupts.
*                    This parameter can be: ENABLE or DISABLE.
* Output         : None
* Return         : None
*******************************************************************************/
void SSP_ITConfig(SSP_TypeDef* SSPx, u16 SSP_IT, FunctionalState NewState)
{
  if(NewState == ENABLE)
  {
    /* Enable the selected SSP interrupts */
    SSPx->IMSCR |= SSP_IT;
  }
  else
  {
    /* Disable the selected SSP interrupts */
    SSPx->IMSCR &= ~SSP_IT;
  }
}

/*******************************************************************************
* Function Name  : SSP_DMACmd