================== FlashTool v2.9.1001 (2006/05/25) ==================
Bug fixes:
 N/A

New features:
 1. [FlashTool/BROM_DLL] Support Multi-Load Autodetection Download.

Enhancements:
 N/A


================== FlashTool v2.8.1001 (2006/05/23) ==================
Bug fixes:
 1. [DA] Fix a bug for wrong information about S71PL129N in Flash Device Table.
 2. [DA] Fix a bug for Software Unlock Command Sequence wrong block address in Renesas driver. Within 64Mb, DQ7 in block address is fixed 0.
 3. [FlashTool] Fix a bug to prevent Scroll back to Page1 when redrawing Test DA message.
 4. [DA/BROM_DLL] Fix a bug for manually format failure on MT6228 NFB EVB.

New features:
 1. [FlashTool/BROM_DLL/DA] Support 6229 Download, add m_emi_gen_c in DRAM setting
 2. [DA] Support High-Address-Bus pins test for NOR Flash.
 3. [DA] Supports new NOR flash device.
		[SHARP] LRS18BK
		[INTEL] 28F3204C3TD70, [MemoCom] KS03204
 4. [DA] Supports new NAND flash device.
		[TOSHIBA] TC58NWM9S3B 

Enhancements:
 N/A


================== FlashTool v2.7.1017 (2006/03/31) ==================
Bug fixes:
 1. [DA] Fix download failure for a binary that is smaller than sector size (eg. 8KB). 
 2. [DA] Fix <<<RAM_BEGIN>>> and <<<RAM_END>>> pattern interfere with INTEL Sibley/Woodmere flash in DetectExtRAM().
 3. [DA] Fix RENESAS superAND format validation failure problem.
 4. [BROM_DLL] Set BootROM read timeout to 4ms to increase start command hit rate in auto-boot mode. 
 5. [BROM_DLL] Fix FAT range information doesn't store in DA_REPORT_T structure.
 6. [BROM_DLL] Fix return code error. Detected a hardware failure, but returned the wrong failure return code "SOC check failure".
 7. [FlashTool] Use known BBCHIP_TYPE and EXT_CLOCK to increase start command hit rate in "Reset to Factory Default" procedure.

New features:
 1. [BROM_DLL] Highly increasing BootROM baudrate to 115200 by baseband chip UART auto-baud feature.
 2. [DA] Supports SST family NOR flash device.
		[SST] SST34HF16x1
		[SST] SST34HF32x4

Enhancements:
 N/A


================== FlashTool v2.7.1016 (2006/03/08) ==================
Bug fixes:
 1. [BROM_DLL] Stop sending DA_FINISH_CMD command when DA_ENABLE_WATCHDOG_CMD is issued.
 2. [BROM_DLL] Using local DA_REPORT_T variable to avoid multithread unsafe problem.

New features:
 1. [DA] Support RENESAS superAND flash read back and format operation.
 2. [FlashTool&BROM_DLL] Auto-load bin files under scatter file's directory when scatter file is selected.
 3. [BROM_DLL] Add DA_LoadByFilepathEx() and DA_LoadEx() to bypass DA validation.
 4. [DA] Supports new NOR flash device.
		[INTEL] PF48F50xxM0x1xx
		[INTEL] PF48F40xxM0x0xx
		[INTEL] PF48F40xxM0x1xx
 5. [DA] Supports new NAND flash device.
		[MICRON] MT29F2G08AAC
		[MICRON] MT29F4G08BAB
		[RENESAS] superAND 512Mb/8bits
		[RENESAS] superAND 512Mb/16bits
		[Infineon] HYF33DS51280
		[Infineon] HYF33DS1G80
		[Infineon] HYF33DS1G16

Enhancements:
 1. [BROM_DLL] Dump BootROM start cmd sequence in debug log.


================== FlashTool v2.7.1015 (2006/01/14) ==================
Bug fixes:
 1. [FlashTool] Fix scatter file path doesn't update on UI. 
 2. [BROM_DLL&DA] Workaround reading DSP version failure issue in some production lines, rollback to the old method for reading DSP version. 
 3. [DA] Fix SHARP LH28F16 flash download fail problem. 

New features:
 1. [DA] Supports INTEL Sibley family flash.
 2. [DA] Supports new NOR flash device.
		[INTEL] PF38F5050M0XXXX

Enhancements:
 1. [FlashTool] Record normal mode and test mode DA path separatedly.
 2. [BROM_DLL&DA] Enhance DA_FINISH_CMD protocol by adding ACK and delay.
 3. [BROM_DLL] Dump debug log in BootROM write cmd.
 4. [BROM_DLL] Modify timeout mechanism for more reasonable in DA_cmd::WriteData() and DA_cmd::WriteData().
 5. [BROM_DLL] Modify power key latch sequence and clear RTC alarm mask to enhance stability. 
 6. [DA] Remove unnecessary floating point code to reduce size in FlashTest_DA.bin.


================== FlashTool v2.7.1014 (2006/01/04) ==================
Bug fixes:
 1. [FlashTool] Fix NFI CS1 device takes no effect problem while selecting "enable NFI-CS1" flag.
 2. [BROM_DLL] Fix 2GB NAND flash size display errror.
 3. [DA] Fix Spansion S71PLXXXN detection problem by reading CFI info.
 4. [DA] Fix TOSHIBA NAND flash callback function set, because TOSHIBA NAND flash doesn't support CopyBack command.

New features:
 1. [DA] Supports Spansion MirrorBit Buffer-Program method.
 2. [DA] Supports new NOR flash device.
		[SPANSION] S71PL129N

Enhancements:
 1. [DA] Halt program when external RAM is less than 128KB.


================== FlashTool v2.7.1013 (2005/12/29) ==================
Bug fixes:
 1. [BROM_DLL] Fix BootROM start command failure while manually selecting MT6226 or MT6227 baseband chip.
 2. [BROM_DLL] Access violation while loading a file smaller than 1MB.
 3. [BROM_DLL] Fix timeout period inconsistent between baseband chip auto-detection and manual-detection methods.
 4. [BROM_DLL] Fix SID bug, different baseband chips with the same SID should stop download.
 5. [DA] Fix Single-Bank-Flash insufficient backup buffer problem. 

New features:
 1. [FlashTool] Add download history feature.
 2. [BROM_DLL] Support new baseband chip MT6226M.
 3. [BROM_DLL] Add UsbComPortEnumerate() function for USB COM port enumeration.
 4. [DA] Supports new NOR flash device.
		[SPANSION] S71PL127N
		[SILICON7] SV6D2832UTA
		[SILICON7] SV6D2832UBA
		[SILICON7] SV6C2832UTA
		[SILICON7] SV6C2832UBA
		[SHARP] LH28F16
		[TOSHIBA] TV00578002DABD
		[TOSHIBA] TV00578003DABD
		[SPANSION] S71PL256N
 5. [DA] Supports new NAND flash device.
		[TOSHIBA] TH58NVG1S8BFT

Enhancements:
 1. [BROM_DLL] Modify debug log time format to millisecond accuracy.
 2. [DA] Add pre-process callback function to unlock all the blocks to meet ST NAND flash requirement. 


================== FlashTool v2.7.1012 (2005/11/24) ==================
Bug fixes:
 1. [BROM_DLL][BUG FIX] Cannot recognize 05B ROM_INFO header. 
 2. [DA][BUG FIX] Incorrectly detects S71PL127JXX as S71PL254JXX because da_memcmp() cannot work probably. 
 3. [DA][BUG FIX] Add NUTL_VERIFY_AFTER_PROGRAM flash to perform read back verification after program operation. 

New features:
 N/A

Enhancements:
 N/A


================== FlashTool v2.7.1011 (2005/11/19) ==================
Bug fixes:
 1. [BROM_DLL&DA][BUG FIX] Fix RTC date-time value could not be initialized problem. 
 2. [DA][BUF FIX] Refill BootLoader header for BootROM to identify NAND flash organization.

New features:
 1. [BROM_DLL&DA][New] Add UID Secure Booting feature.
 2. [DA][New] Supports new NOR flash device.
				[INTEL] 38F1010C0ZBL0
				[INTEL] 28F1602C3BD70
				[TOSHIBA] TY0068B012APGG
				[TOSHIBA] TY0068B013APGG
 3. [DA][New] Supports new NAND flash device.
				[HYNIX] HY27UF081G2M

Enhancements:
 N/A


================== FlashTool v2.7.1010 (2005/10/25) ==================
Bug fixes:
 1. [DA][BUG FIX] Fix wrong start block address of 2nd binary for new NFB architecture.

New features:
 N/A

Enhancements:
 1. [BROM_DLL][Enhance] Always fix BootROM start command read timeout to 20ms to bypass start command failure problem.

 
================== FlashTool v2.7.1009 (2005/10/19) ==================
Bug fixes:
 N/A

New features:
 1. [BROM_DLL&DA][New] Support new NFB architecture from w05.42, incompatible with any NFB load earlier then w05.42.

Enhancements:
 N/A


================== FlashTool v2.7.1008 (2005/10/19) ==================
Bug fixes:
 N/A

New features:
 1. [BROM_DLL&DA][New] New H/W devices detection architecture including NOR, NAND, SRAM and DRAM detection. 
 2. [BROM_DLL&DA][New] DA partial download technic, that overcomes DA size exceeds MT6205B internal SRAM (32KB).
 3. [BROM_DLL&DA][New] Format verification option, each byte should be 0xFF after erasure. 
 4. [BROM_DLL&DA][New] DA validation to ensure invalid binary could not be loaded.
 5. [BROM_DLL&DA][New] Support NFB download. 
 6. [BROM_DLL&DA][New] Support NAND flash format with 3 method, NORMAL, FORCEDLY ERASE and MARK AS BAD BLOCK. 
 7. [BROM_DLL&DA][New] Support NAND flash read back with 4 methods, PAGE+ECC, PAGE ONLY, SPARE ONLY and PAGE+SPARE. 

Enhancements:
 N/A