/* Network interface functions
Debug option: reverse the order in which IP fragments are sent */
#define SUBFIRST 0  /* Set non-zero to transmit subframes first */
/* Debug options to drop frames on transmit or receive */
#define TXDROP  0   /* Set non-zero to drop 1-in-N transmit frames */
#define RXDROP  0   /* Set non-zero to drop 1-in-N receive frames */

/* All drivers are supported under Borland C
** Packet driver isn't supported under Visual C
** Packet and SLIP drivers aren't supported under DJGPP */
//#ifdef __BORLANDC__/
//#define PKTD_SUPPORT  1
//#else
#define PKTD_SUPPORT  0
//#endif
//#ifdef DJGPP
#define SLIP_SUPPORT 0
//#else
//#define SLIP_SUPPORT 1
//#endif

#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <ctype.h>

/* Override the default circular buffer size used in TCPFS.H */
#define _CBUFFLEN_ 0x2000           /* Buffer size: MUST be power of 2 */

#include "netutil.h"
#include "net.h"
#include "ether.h"
//#include "serpc.h"

#if PKTD_SUPPORT
#include "pktd.h"
#else                               /* Dummy functions if PKTD not installed */
#define open_pktd(x)        no_driver("packet")
#define close_pktd(x)       no_driver("packet")
#define put_pktd(x, y, z)   no_driver("packet")
#endif

#if !SLIP_SUPPORT                   /* Dummy functions if SLIP not installed */
#define open_slip(x, y)     no_driver("SLIP")
#define close_slip(x)       no_driver("SLIP")
#define put_slip(x, y, z)   no_driver("SLIP")
#define receive_slip(x)     no_driver("SLIP")
#endif

#define SLIP_END 0xc0               /* SLIP escape codes */
#define SLIP_ESC 0xdb
#define ESC_END  0xdc
#define ESC_ESC  0xdd

CBUFF rxpkts = {_CBUFFLEN_};        /* Rx and Tx circular packet buffers */
CBUFF txpkts = {_CBUFFLEN_};

//BYTE slipbuffs[MAXCOMMS][MAXSLIP];  /* SLIP buffers */
//WORD sliplens[MAXCOMMS];            /* ..and data lengths */
int netdebug;                       /* Flag to enable net packet display */
FILE *logfile;                      /* Handle for logfile */
int ndrivers;                       /* Number of initialised drivers */
int txfcount, rxfcount;             /* Counts for 'frame drop' options */

/* Private prototypes */
WORD no_driver(char *s);
void do_modem(char c);
extern void Uart_Printf(char *fmt,...);

/* Get a frame from the network, return length excl. hardware header */
int get_frame(GENFRAME *gfp)
{
    int rxlen;

    if ((rxlen=get_net(gfp)) > 0)           /* If any packet received.. */
    {
        if (is_ether(gfp, rxlen))           /* If Ethernet.. */
            rxlen -= ETHHDRLEN;//sizeof(ETHERHDR);      /* Subtract header length */
        else if (!is_slip(gfp, rxlen))      /* If not SLIP.. */
            rxlen = 0;                      /* Discard if unrecognised */
    }
    return(rxlen);
}

/* Put frame out onto the network; if sub-frame (fragment), send it as well */
int put_frame(GENFRAME *gfp, int len)
{
    int ret=0, len1, len2;
    GENFRAME *sfp;

    len1 = gfp->g.fragoff ? gfp->g.fragoff : len;   /* Get len of 2 fragments */
    len2 = len - len1;
    sfp = (GENFRAME *)&gfp->buff[gfp->g.fragoff];   /* ..and ptr to 2nd frag */
#if SUBFIRST
    if (len2 > 0)                           /* Send sub-frame first.. */
        ret = put_net(sfp, (WORD)len2);
    if (len1 > 0)                           /* ..then main frame */
        ret += put_net(gfp, (WORD)len1);
#else                                       /* Or send main frame first */
    if (len1 > 0)
        ret = put_net(gfp, (WORD)len1);
    if (len2 > 0)
        ret += put_net(sfp, (WORD)len2);
#endif
    return(ret);
}

/* Open network driver
** Return driver type, which is the driver config number (1st driver is 0)
** plus flags to indicate frame type (Ethernet, SLIP etc.). Return 0 if error */
WORD open_net(char *cfgstr)
{
    WORD dtype=0, etype, stype;
    int append;
    char *s;

    etype = ndrivers + DTYPE_ETHER;                 /* Ethernet driver type */
    stype = ndrivers + DTYPE_SLIP;                  /* ..and SLIP driver type */
    if (ndrivers >= MAXNETS)
        Uart_Printf("ERROR: exceeded maximum number of network interfaces\n");
    else if ((s = skiptoken(cfgstr, "ether")) != 0) /* Ethernet? */
    {
        cfgstr = skippunct(s);
        if ((s = skiptoken(cfgstr, "snap")) != 0)   /* ..with 802.3 SNAP hdr? */
        {
            etype |= DTYPE_SNAP;
            cfgstr = skippunct(s);
        }                                           /* Direct hardware drive? */
        if ((s = skiptoken(cfgstr, "ne")) != 0)     /* ..NE2000-compatible */
        {
            dtype = open_etherne(s, (WORD)(etype|DTYPE_NE));
            
        }    
        /*else if ((s = skiptoken(cfgstr, "3c")) != 0)// ..3COM 3C509 
            dtype = open_ether3c(s, (WORD)(etype|DTYPE_3C));
        else if ((s = skiptoken(cfgstr, "pktd")) != 0)
            dtype = open_pktd(etype | DTYPE_PKTD);  // Ether Packet Driver? */
    }
    else if ((s = skiptoken(cfgstr, "slip")) != 0)  /* SLIP interface? */
    {
        cfgstr = skippunct(s);
        if ((s = skiptoken(cfgstr, "pc")) != 0)     /* PC ser (direct/Win32) */
            dtype = open_slip(s, stype);
        else if ((s = skiptoken(cfgstr, "pktd")) != 0)
            dtype = open_pktd(stype | DTYPE_PKTD);  /* Packet driver SLIP */
    }
    if (dtype && (s=strchr(s, '>'))!=0)             /* Log net Tx/Tx to file? */
    {
        if ((append = (*++s == '>'))!=0)            /* If '>>' append to file */
            s++;
        s = skipspace(s);                           /* Open logfile */
        Uart_Printf("%s logfile '%s'\n", append ? "Appending to" : "Creating",  s);
        if ((logfile=fopen(s, append ? "ab" : "wb"))==0)
            Uart_Printf("ERROR: can't open logfile\n");
    }
    if (dtype)                                      /* Bump up driver count */
        ndrivers++;
    return(dtype);
}

/* Close network driver */
void close_net(WORD dtype)
{
    if (dtype & DTYPE_NE)                           /* Close NE2000-compat */
        close_etherne(dtype);
/*    else if (dtype & DTYPE_3C)                      // ..or 3C509 
        close_ether3c(dtype);
    else if (dtype == DTYPE_SLIP)                   // ..or SLIP 
        close_slip(dtype);
    else if (dtype & DTYPE_PKTD)                    // ..or packet driver 
        close_pktd(dtype);*/
    if (logfile)                                    /* Close logfile */
    {
        Uart_Printf("Closing logfile\n");
        if (ferror(logfile))
            Uart_Printf("\nERROR writing logfile\n");
        fclose(logfile);
        logfile = 0;
    }
}

/* Dummy initialisation function for unsupported drivers */
WORD no_driver(char *s)
{
    Uart_Printf("ERROR: %s driver not included in this version\n", s);
    return(0);
}

/* Return pointer to my Ethernet addr, given driver type */
BYTE *ether_addr(WORD dtype)
{
    BYTE *addr=(BYTE *)"-SLIP-";

    if (dtype & DTYPE_NE)
        addr = etherne_addr(dtype);
/*    else if (dtype & DTYPE_3C)
        addr = ether3c_addr(dtype);*/
#if PKTD_SUPPORT
    else if (dtype & DTYPE_PKTD)
        addr = etherpktd_addr(dtype);
#endif
    return(addr);
}

/* Get frame from receive buffer, given pointer to a frame buffer.
** If driver type field in the frame buffer is non-zero, match that driver type
** If zero, match any driver type. Return data length (0 if no packet) */
WORD get_net(GENFRAME *gfp)
{
    WORD len=0;
    SNAPFRAME *sfp;
    GENHDR gh={0,0,0};
    LWORD mstim;

    if (buff_dlen(&rxpkts) >= sizeof(GENHDR))
    {                                       /* If frame in Rx pkt buffer.. */
        buff_out(&rxpkts, (BYTE *)&gh, sizeof(gh)); /* Check frame hdr */
        len = gh.len;                       /* ..ensure length is sensible */
        if (len<1 || len>MAXFRAME)
        {
            rxpkts.out = rxpkts.trial = rxpkts.in;
            Uart_Printf("\nERROR Rx frame buffer corrupt!\n");
            Uart_Printf("Frame len=%u, type=%u\n", len, gh.dtype);
            len = 0;
        }
        else if (gh.dtype==gfp->g.dtype || !gfp->g.dtype)
        {                                   /* Driver type matches or is 0 */
            buff_out(&rxpkts, gfp->buff, len);  /* Store frame in buffer */
            if (!gfp->g.dtype)              /* If no driver type in buffer.. */
                gfp->g = gh;                /* ..load in complete header */
            gfp->g.len = len;               /* Set length in header */
            if (netdebug)                   /* Display raw frame */
                 disp_frame(gfp, len, 0);
            if (logfile)                    /* Log raw frame */
            {
                //mstim = mstime();
                fwrite("GET ", 1, 4, logfile);
                fwrite(&mstim, 1, 4, logfile);
                fwrite(gfp, 1, len+sizeof(GENHDR), logfile);
            }
            if (gfp->g.dtype&DTYPE_ETHER && /* If Ethernet frame.. */
                gfp->buff[MACLEN*2] < 6)    /* ..and Pcol less than 600h */
            {                               /* ..might be 802.3 SNAP */
                sfp = (SNAPFRAME *)gfp->buff;
                if (len>sizeof(SNAPHDR) && sfp->s.lsap==0xaaaa)
                {                           /* If so, convert to DIX */
                    len -= sizeof(SNAPHDR);
                    memmove(&sfp->e.ptype, &sfp->s.ptype, len);
                }
                gfp->g.len = len;           /* Re-set length in header */
            }
        }
        else
        {                                   /* Wrong driver type: discard pkt */
            buff_out(&rxpkts, 0, len);
            len = 0;
        }
#if RXDROP
        if (++txfcount % RXDROP == 0)
        {
            Uart_Printf("     Rx frame dropped for debug\n");
            len = 0;
        }