/***********************************************************************************************************                                                uC/GUI*                        Universal graphic software for embedded applications**                       (c) Copyright 2002, Micrium Inc., Weston, FL*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH**              礐/GUI is protected by international copyright laws. Knowledge of the*              source code may not be used to write a similar product. This file may*              only be used in accordance with a license and should not be redistributed*              in any way. We appreciate your understanding and fairness.*----------------------------------------------------------------------File        : LCDConf_1375_M1_M320x240.hPurpose     : Sample configuration file----------------------------------------------------------------------*/#ifndef LCDCONF_H#define LCDCONF_H/***********************************************************************                   General configuration of LCD************************************************************************/#define LCD_XSIZE      (320)   /* X-resolution of LCD, Logical coor. */#define LCD_YSIZE      (240)   /* Y-resolution of LCD, Logical coor. */#define LCD_BITSPERPIXEL (1)#define LCD_CONTROLLER 1375/***********************************************************************                   Full bus configuration************************************************************************/#define LCD_READ_MEM(Off)            *((U16*)         (0xc00000+(((U32)(Off))<<1)))#define LCD_WRITE_MEM(Off,data)      *((U16*)         (0xc00000+(((U32)(Off))<<1)))=data#define LCD_READ_REG(Off)            *((volatile U16*)(0xc1ffe0+(((U16)(Off))<<1)))#define LCD_WRITE_REG(Off,data)      *((volatile U16*)(0xc1ffe0+(((U16)(Off))<<1)))=data/***********************************************************************                   Define contents of registers************************************************************************/#define LCD_REG0  (0)                                          /* Product code */#define LCD_REG1  (0)                                          /* Mode reg 0.    0 for 4 bit mono LCD */            \                                                               /*                1 for 8 bit mono LCD */            \                                                               /*             0x23 for 8 bit color LCD */           \                 |(1<<2)                                       /*             Mask FPSHIFT during h.non-display */#define LCD_REG2 ((0<<6)                                       /* Mode reg 1: Bits per pixel 0:1, 1:2, 2:4, 3:8 */  \                 |(1<<5)                                       /* High performance bit for accel. of CPU access */  \                 |(0<<4)                                       /* Input clock divide */                             \                 |(0<<3)                                       /* Display blank */                                  \                 |(0<<2)                                       /* Frame repeat */                                   \                 |(0<<1)                                       /* HW video invert enable */                         \                 |(0<<0))                                      /* SW video invert */                 #define LCD_REG3                                               /* Mode reg 2. 0 for 4 bit mono LCD */               \                  (1<<7)                                       /* LUT bypass */                                     \                 |(0<<3)                                       /* LCDPWR override */                                \                 |(0<<2)                                       /* hw power save enable */                           \                 |(3<<0)                                       /* Software power save :3 = normal operation */#define LCD_REG4 (LCD_XSIZE/8-1)                               /* horizontal panel size*/#define LCD_REG5 ((LCD_YSIZE-1)&255)                           /* Vert. panel size, lsb */#define LCD_REG6 ((LCD_YSIZE-1)>>8)                            /* Vert. panel size, msb */#define LCD_REG7 (0)                                           /* FPLine start position (TFT only) */#define LCD_REG8 (0)                                           /* H.non display period   (0 usually O.K.)*/#define LCD_REG9 (0)                                           /* FPFrame start pos.    (TFT only) */#define LCD_REGA (0)                                           /* v.non display period  */#define LCD_REGB (0)                                           /* mod rate register     0: every frame */#define LCD_REGC (0)                                           /* Screen 1 start lsb    */#define LCD_REGD (0)                                           /* Screen 1 start msb    */#define LCD_REG12 (LCD_BITSPERPIXEL*(LCD_VXSIZE-LCD_XSIZE)/16) /* Memory Address offset (usually 0) */#define LCD_REG13 LCD_REG5                                     /* Vert. screen 1 size, lsb */#define LCD_REG14 LCD_REG6                                     /* Vert. screen 1 size, msb */#define LCD_REG1B (0)                                          /* No swivel mode  (use 0xc0 for alt.swivel)  */#define LCD_REG1C (0x78)                                       /* bytes per line (stride, for swivel mode only)  *//***********************************************************************                   Init sequence for 16 bit access************************************************************************/#if !LCD_SWAP_BYTE_ORDER  #define LCD_WRITE_REGLH(Adr, d0, d1) LCD_WRITE_REG(Adr, ((d0)<<8) | (d1))#else  #define LCD_WRITE_REGLH(Adr, d0, d1) LCD_WRITE_REG(Adr, ((d1)<<8) | (d0))#endif  #define LCD_INIT_CONTROLLER()                                                                    \        LCD_WRITE_REGLH(0x00>>1,LCD_REG0, LCD_REG1);                                             \        LCD_WRITE_REGLH(0x02>>1,LCD_REG2, LCD_REG3);                                             \        LCD_WRITE_REGLH(0x04>>1,LCD_REG4, LCD_REG5);                                             \        LCD_WRITE_REGLH(0x06>>1,LCD_REG6, LCD_REG7);                                             \        LCD_WRITE_REGLH(0x08>>1,LCD_REG8, LCD_REG9);                                             \        LCD_WRITE_REGLH(0x0a>>1,LCD_REGA, LCD_REGB);                                             \        LCD_WRITE_REGLH(0x0c>>1,LCD_REGC, LCD_REGD);                                             \        LCD_WRITE_REG  (0x0e>>1,0x00);                 /* 0, screen 2 start l*/                  \        LCD_WRITE_REG  (0x10>>1,0x00);                 /* screen 2 start h */                    \        LCD_WRITE_REGLH(0x12>>1,LCD_REG12, LCD_REG13); /* mem adr. offset, screen 1 vsize(lsb)*/ \        LCD_WRITE_REGLH(0x14>>1,LCD_REG14, 0);                                                   \        LCD_WRITE_REGLH(0x1a>>1,0, LCD_REG1B);                                                   \        LCD_WRITE_REGLH(0x1c>>1,LCD_REG1C, 0) #endif /* LCDCONF_H */