/***********************************************************************************************************                                                uC/GUI*                        Universal graphic software for embedded applications**                       (c) Copyright 2002, Micrium Inc., Weston, FL*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH**              礐/GUI is protected by international copyright laws. Knowledge of the*              source code may not be used to write a similar product. This file may*              only be used in accordance with a license and should not be redistributed*              in any way. We appreciate your understanding and fairness.*----------------------------------------------------------------------File        : LCDConf_8811_M1_LDB4_M128x80.hPurpose     : Sample configuration file----------------------------------------------------------------------*/#ifndef LCDCONF_H#define LCDCONF_H/***********************************************************************                   General configuration of LCD************************************************************************/#define LCD_CONTROLLER 8811#define LCD_XSIZE      (128)   /* X-resolution of LCD, Logical coor. */#define LCD_YSIZE       (80)   /* Y-resolution of LCD, Logical coor. */#define LCD_BITSPERPIXEL (1)/***********************************************************************                   Simple bus configuration************************************************************************/#ifndef WIN32  void LCD_X_Write00(char c);  void LCD_X_Write01(char c);  char LCD_X_Read00(void);  char LCD_X_Read01(void);  #define LCD_WRITE_A1(Byte) LCD_X_Write01(Byte)  #define LCD_WRITE_A0(Byte) LCD_X_Write00(Byte)  #define LCD_READ_A1(Byte)  Byte = LCD_X_Read01()  #define LCD_READ_A0(Byte)  Byte = LCD_X_Read00()  void LCD_X_Init(void);  #define LCD_X_INIT() LCD_X_Init()#endif/***********************************************************************                   Initialisation macro************************************************************************/#define LCD_INIT_CONTROLLER() \  LCD_X_INIT(); \  LCD_WRITE_A0(0xE2); /* Software Reset */ \  LCD_WRITE_A0(0xAB); /* Internal Oscillator ON */ \  LCD_WRITE_A0(0xE1); /* power save mode off */ \  LCD_WRITE_A0(0x62); /* 4x multiplier */ \  LCD_WRITE_A0(0x81); /* VOP first byte */ \  LCD_WRITE_A0(0xD3); /* VOP 2nd byte */ \  LCD_WRITE_A0(0x2B); /* Internal Charge Pump ON */ \  LCD_WRITE_A0(0xAF); /* Display ON */ \  LCD_WRITE_A0(0x1E); /* Frame Rate Frequency 50Hz */ \  LCD_WRITE_A0(0xA1); /* X mirroring ON */ \  LCD_WRITE_A0(0x40); /* set first diplay line */ \  LCD_WRITE_A0(0x00); /* set initial display line */ \  LCD_WRITE_A0(0x1A); /* p=automatically set */ \  LCD_WRITE_A0(0xAF); /* Display ON */ \#endif /* LCDCONF_H */