/***********************************************************************************************************                                                uC/GUI*                        Universal graphic software for embedded applications**                       (c) Copyright 2002, Micrium Inc., Weston, FL*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH**              礐/GUI is protected by international copyright laws. Knowledge of the*              source code may not be used to write a similar product. This file may*              only be used in accordance with a license and should not be redistributed*              in any way. We appreciate your understanding and fairness.*----------------------------------------------------------------------File        : LCDConf_8535_M1_M93x65.hPurpose     : Sample configuration file----------------------------------------------------------------------*/#ifndef LCDCONF_H#define LCDCONF_H/***********************************************************************                   General configuration of LCD************************************************************************/#define LCD_CONTROLLER 8535#define LCD_XSIZE       (93)   /* X-resolution of LCD, Logical coor. */#define LCD_YSIZE       (65)   /* Y-resolution of LCD, Logical coor. */#define LCD_XOFF        (133 - LCD_XSIZE)#define LCD_BITSPERPIXEL (1)/***********************************************************************                   Simple bus configuration************************************************************************/void LCD_X_Write00 (char c);void LCD_X_Write01 (char c);void LCD_X_WriteM01(char * pData, int NumBytes);char LCD_X_Read00  (void);char LCD_X_Read01  (void);#define LCD_WRITE_A0(Byte)             LCD_X_Write00(Byte)#define LCD_WRITE_A1(Byte)             LCD_X_Write01(Byte)#define LCD_WRITEM_A1(pData, NumBytes) LCD_X_WriteM01(pData, NumBytes)#define LCD_READ_A1(Byte)              Byte = LCD_X_Read01()#define LCD_READ_A0(Byte)              Byte = LCD_X_Read00()/***********************************************************************                   Initialisation macro************************************************************************/#define LCD_INIT_CONTROLLER()                                          \  LCD_X_Init();                                                        \  LCD_WRITE_A0(0x01); /* jump to command page 111 */                   \  LCD_WRITE_A0(0x10); /* power-down control, data entry mode */        \  LCD_WRITE_A0(0x0E); /* select command page 110 */                    \  LCD_WRITE_A0(0x06); /* sets display mode normal */                   \  LCD_WRITE_A0(0x0C); /* mirror X = 1, mirror Y = 0 */                 \  LCD_WRITE_A0(0x12); /* set bias system 010 */                        \  LCD_WRITE_A0(0x20); /* set current for bias system IB = 0 */         \  LCD_WRITE_A0(0x84); /* set multiplex rate 100 */                     \  LCD_WRITE_A0(0x01); /* jump to command page 111 */                   \  LCD_WRITE_A0(0x0D); /* select command page 101 */                    \  LCD_WRITE_A0(0x08); /* Number of HV-gen voltage multiplication 00 */ \  LCD_WRITE_A0(0x12); /* set temperature coefficient 010 */            \  LCD_WRITE_A0(0xA8); /* set VLCD register */                          \  LCD_WRITE_A0(0x07); /* VLCD range, enable/disable HV-gen */          \  LCD_WRITE_A0(0x01)  /* jump to command page 111 */#endif /* LCDCONF_H */