?? qv_n.txt
字號:
/*===========================================================================*/
/* Register Setting for TW8800/TW8801 */
/*===========================================================================*/
// Input : NTSC
// Panel : QVGA
//-----------------------------------------------------------------------------
// Below listed registers should not be set.
// 0x02, 0x06,
//
//
TW88I2CAddress, 70,
0xc5, 0xc1,
0xc6, 0x25, // ADC PLL=27Mhz
//------------ Decoder (32) ---------------------------------------------------
0x1c, 0x08, // Standard, shadow ** N/P
0x04, 0x00, // Luminance Gamma
0x07, 0x02, // Cropping H ** N/P, panel
0x08, 0x18, // V delay L ** N/P, panel
0x09, 0xf0, // V active L ** N/P, panel?
0x0a, 0x31, // H delay L ** N/P, panel
0x0b, 0xd0, // H active L ** N/P, panel?
0x0c, 0xcc, // Control Reg 1
0x0d, 0x85, // FreeRun=NTSC
0x10, 0x00, // Brightness
0x11, 0x60, // Contrast
0x12, 0x61, // Sharpness Ctrl 1
0x13, 0xc0, // Chroma(U) gain
0x14, 0xa0, // chroma(V) gain
0x15, 0x00, // Hue
0x16, 0xc3, // Sharpness Ctrl 2
0x17, 0x81, // V peaking Ctrl 1
0x18, 0x44, // Coring Ctrl
0x20, 0x50, // Clamp Gain for TW8806B
0x21, 0x82, // Individual AGC gain
0x23, 0xf8, // White Peak Threshold
0x25, 0x38, // Sync amplitude
0x26, 0x4a, // Sync Miss Count
0x28, 0x00, // V control Reg
0x29, 0x00, // V control Reg 2
0x2a, 0xa0, // Color killer level
0x2b, 0x44, // Comb filter ctrl
0x2c, 0x40, // Luma delay/H sync ctrl
0x2d, 0x00, // Misc.1
0x2e, 0x91, // Misc.2
0x2f, 0xe0, // Misc.3
0x31, 0x14, // Clamp Ctrl 2
0x35, 0x02, // Y Clamp Current
//---------- Input/Output -----------------------------------------------------
0x40, 0x00, // Input
0x41, 0x20, // Output
0x44, 0x18, // Input control
//------------ Zoom -----------------------------------------------------------
0x63, 0x07, // H/V scale up/dn H ** N/P panel
0x60, 0x00, // H-scale up L ** N/P panel
0x61, 0x0e, // H-scale dn L ** N/P panel
0x62, 0x00, // V-scale up L ** N/P panel
0x64, 0x00, // H-scale up offset ** N/P panel
0x65, 0x80, // V-scale up offset ** N/P panel
0x77, 0x00,
//--------- Display control ---------------------------------------------------
0x95, 0x10, // OSD for QVGA
0xb0, 0x48, //
0xbb, 0x00, //PVR-H:PVP-H ** panel
0xb7, 0xfd, //PVR-L ** panel
0xb8, 0x00, //V Sync ** panel
0xb9, 0x06, //V Back Porch ** N/P panel
0xba, 0xf0, //PVR-L ** panel
0xb6, 0x91, //PHR-H:PHP-H ** N/P panel
0xb2, 0xaa, //PHP-L ** N/P panel
0xb3, 0x05, //H sync **
0xb4, 0x23, //H Back Porch ** panel
0xb5, 0x40, //PHR-L ** panel
0xbc, 0x21, // Dithering
0xbe, 0x00, //Auto Calc.
//--------- Misc. Input -------------------------------------------------------
0xc0, 0xd5, // Initial Counter ** N/P panel
0xc1, 0x00, // ** N/P panel
0xc2, 0x75, // ** N/P panel
//--------- Output Interface --------------------------------------------------
//--------- PLL ---------------------------------------------------------------
0xf9, 0x00,
0xfa, 0x3f, // 6.7000MHz ** N/P panel
0xfb, 0x86, // ** N/P panel
0xfc, 0x00, // ** N/P panel
0xfd, 0x00, // ** N/P panel
0xfe, 0x00, // ** N/P panel
//-----------------------------------------------------------------------------
0xff, 0x80,
0xd1, 0xff,
0xff, 0xff
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -