# Name: Makefile# Project: Remote Sensor# Author: Christian Starkjohann, modified for LCD2USB by Till Harbaum# Creation Date: 2005-03-20# Tabsize: 4# Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH# License: Proprietary, free under certain conditions. See Documentation.# This Revision: $Id: Makefile.avrusb,v 1.1 2007/01/14 12:12:27 harbaum Exp $# DEFINES += -DBWCT_COMPAT # DEFINES += -DDEBUG_LEVEL=1DEFINES += -DF_CPU=12000000COMPILE = avr-gcc -Wall -O2 -Iusbdrv -I. -mmcu=atmega8 $(DEFINES)OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o main.o lcd.o# symbolic targets:all:	firmware-avrusb.hex.c.o:	$(COMPILE) -c $< -o $@.S.o:	$(COMPILE) -x assembler-with-cpp -c $< -o $@# "-x assembler-with-cpp" should not be necessary since this is the default# file type for the .S (with capital S) extension. However, upper case# characters are not always preserved on Windows. To ensure WinAVR# compatibility define the file type manually..c.s:	$(COMPILE) -S $< -o $@flash:	all	avrdude -c usbasp -p atmega8 -U lfuse:w:0x9f:m -U hfuse:w:0xc9:m -U flash:w:firmware-avrusb.hexflash-nodep:	avrdude -c usbasp -p atmega8 -U lfuse:w:0x9f:m -U hfuse:w:0xc9:m -U flash:w:firmware-avrusb.hex# Fuse high byte:# 0xc9 = 1 1 0 0   1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000)#        ^ ^ ^ ^   ^ ^ ^------ BOOTSZ0#        | | | |   | +-------- BOOTSZ1#        | | | |   + --------- EESAVE (don't preserve EEPROM over chip erase)#        | | | +-------------- CKOPT (full output swing)#        | | +---------------- SPIEN (allow serial programming)#        | +------------------ WDTON (WDT not always on)#        +-------------------- RSTDISBL (reset pin is enabled)# Fuse low byte:# 0x9f = 1 0 0 1   1 1 1 1#        ^ ^ \ /   \--+--/#        | |  |       +------- CKSEL 3..0 (external >8M crystal)#        | |  +--------------- SUT 1..0 (crystal osc, BOD enabled)#        | +------------------ BODEN (BrownOut Detector enabled)#        +-------------------- BODLEVEL (2.7V)fuse:	$(UISP) --wr_fuse_h=0xc9 --wr_fuse_l=0x9fclean:	rm -f firmware-avrusb.hex firmware-avrusb.lst firmware-avrusb.obj firmware-avrusb.cof firmware-avrusb.list firmware-avrusb.map firmware-avrusb.eep.hex firmware-avrusb.bin *.o usbdrv/*.o firmware-avrusb.s usbdrv/oddebug.s usbdrv/usbdrv.s# file targets:firmware-avrusb.bin:	$(OBJECTS)	$(COMPILE) -o firmware-avrusb.bin $(OBJECTS)firmware-avrusb.hex:	firmware-avrusb.bin	rm -f firmware-avrusb.hex firmware-avrusb.eep.hex	avr-objcopy -j .text -j .data -O ihex firmware-avrusb.bin firmware-avrusb.hex	./checksize firmware-avrusb.bin 8192 960# do the checksize script as our last action to allow successful compilation# on Windows with WinAVR where the Unix commands will fail.avrdude: firmware-avrusb.hex	avrdude -c usbasp -p atmega8 -U lfuse:w:0x9f:m -U hfuse:w:0xc9:m -U flash:w:firmware-avrusb.hexavrdude-nodep:	avrdude -c usbasp -p atmega8 -U lfuse:w:0x9f:m -U hfuse:w:0xc9:m -U flash:w:firmware-avrusb.hexdisasm:	firmware-avrusb.bin	avr-objdump -d firmware-avrusb.bincpp:	$(COMPILE) -E main.c