?? s3c2410.h
字號:
/****************************************Copyright (c)**************************************************
**
**
**
**
**--------------File Info-------------------------------------------------------------------------------
** File Name: s3c2410.h
** Last modified Date: 2005-12-31
** Last Version: v1.0
** Description: S3C2410頭文件
**
**------------------------------------------------------------------------------------------------------
** Created By:
** Created date:
** Version:
** Descriptions:
**
**------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
** Version:
** Descriptions:
**
********************************************************************************************************/
#ifndef __S3C2410_H
#define __S3C2410_H
#ifdef __cplusplus
extern "C" {
#endif
// Memory control
#define rBWSCON (*(volatile unsigned *)0x48000000) //Bus width & wait status
#define rBANKCON0 (*(volatile unsigned *)0x48000004) //Boot ROM control
#define rBANKCON1 (*(volatile unsigned *)0x48000008) //BANK1 control
#define rBANKCON2 (*(volatile unsigned *)0x4800000c) //BANK2 cControl
#define rBANKCON3 (*(volatile unsigned *)0x48000010) //BANK3 control
#define rBANKCON4 (*(volatile unsigned *)0x48000014) //BANK4 control
#define rBANKCON5 (*(volatile unsigned *)0x48000018) //BANK5 control
#define rBANKCON6 (*(volatile unsigned *)0x4800001c) //BANK6 control
#define rBANKCON7 (*(volatile unsigned *)0x48000020) //BANK7 control
#define rREFRESH (*(volatile unsigned *)0x48000024) //DRAM/SDRAM refresh
#define rBANKSIZE (*(volatile unsigned *)0x48000028) //Flexible Bank Size
#define rMRSRB6 (*(volatile unsigned *)0x4800002c) //Mode register set for SDRAM
#define rMRSRB7 (*(volatile unsigned *)0x48000030) //Mode register set for SDRAM
// USB Host
// Control and Status group
#define rHcRevision (*(volatile unsigned *)0x49000000)
#define rHcControl (*(volatile unsigned *)0x49000004)
#define rHcCommonStatus (*(volatile unsigned *)0x49000008)
#define rHcInterruptStatus (*(volatile unsigned *)0x4900000c)
#define rHcInterruptEnable (*(volatile unsigned *)0x49000010)
#define rHcInterruptDisable (*(volatile unsigned *)0x49000014)
// Memory pointer group
#define rHcHCCA (*(volatile unsigned *)0x49000018)
#define rHcPeriodCuttentED (*(volatile unsigned *)0x4900001c)
#define rHcControlHeadED (*(volatile unsigned *)0x49000020)
#define rHcControlCurrentED (*(volatile unsigned *)0x49000024)
#define rHcBulkHeadED (*(volatile unsigned *)0x49000028)
#define rHcBulkCurrentED (*(volatile unsigned *)0x4900002c)
#define rHcDoneHead (*(volatile unsigned *)0x49000030)
// Frame counter group
#define rHcRmInterval (*(volatile unsigned *)0x49000034)
#define rHcFmRemaining (*(volatile unsigned *)0x49000038)
#define rHcFmNumber (*(volatile unsigned *)0x4900003c)
#define rHcPeriodicStart (*(volatile unsigned *)0x49000040)
#define rHcLSThreshold (*(volatile unsigned *)0x49000044)
// Root hub group
#define rHcRhDescriptorA (*(volatile unsigned *)0x49000048)
#define rHcRhDescriptorB (*(volatile unsigned *)0x4900004c)
#define rHcRhStatus (*(volatile unsigned *)0x49000050)
#define rHcRhPortStatus1 (*(volatile unsigned *)0x49000054)
#define rHcRhPortStatus2 (*(volatile unsigned *)0x49000058)
// INTERRUPT
#define rSRCPND (*(volatile unsigned *)0x4a000000) //Interrupt request status
#define rINTMOD (*(volatile unsigned *)0x4a000004) //Interrupt mode control
#define rINTMSK (*(volatile unsigned *)0x4a000008) //Interrupt mask control
#define rPRIORITY (*(volatile unsigned *)0x4a00000c) //IRQ priority control
#define rINTPND (*(volatile unsigned *)0x4a000010) //Interrupt request status
#define rINTOFFSET (*(volatile unsigned *)0x4a000014) //Interruot request source offset
#define rSUBSRCPND (*(volatile unsigned *)0x4a000018) //Sub source pending
#define rINTSUBMSK (*(volatile unsigned *)0x4a00001c) //Interrupt sub mask
// DMA
#define rDISRC0 (*(volatile unsigned *)0x4b000000) //DMA 0 Initial source
#define rDISRCC0 (*(volatile unsigned *)0x4b000004) //DMA 0 Initial source control
#define rDIDST0 (*(volatile unsigned *)0x4b000008) //DMA 0 Initial Destination
#define rDIDSTC0 (*(volatile unsigned *)0x4b00000c) //DMA 0 Initial Destination control
#define rDCON0 (*(volatile unsigned *)0x4b000010) //DMA 0 Control
#define rDSTAT0 (*(volatile unsigned *)0x4b000014) //DMA 0 Status
#define rDCSRC0 (*(volatile unsigned *)0x4b000018) //DMA 0 Current source
#define rDCDST0 (*(volatile unsigned *)0x4b00001c) //DMA 0 Current destination
#define rDMASKTRIG0 (*(volatile unsigned *)0x4b000020) //DMA 0 Mask trigger
#define rDISRC1 (*(volatile unsigned *)0x4b000040) //DMA 1 Initial source
#define rDISRCC1 (*(volatile unsigned *)0x4b000044) //DMA 1 Initial source control
#define rDIDST1 (*(volatile unsigned *)0x4b000048) //DMA 1 Initial Destination
#define rDIDSTC1 (*(volatile unsigned *)0x4b00004c) //DMA 1 Initial Destination control
#define rDCON1 (*(volatile unsigned *)0x4b000050) //DMA 1 Control
#define rDSTAT1 (*(volatile unsigned *)0x4b000054) //DMA 1 Status
#define rDCSRC1 (*(volatile unsigned *)0x4b000058) //DMA 1 Current source
#define rDCDST1 (*(volatile unsigned *)0x4b00005c) //DMA 1 Current destination
#define rDMASKTRIG1 (*(volatile unsigned *)0x4b000060) //DMA 1 Mask trigger
#define rDISRC2 (*(volatile unsigned *)0x4b000080) //DMA 2 Initial source
#define rDISRCC2 (*(volatile unsigned *)0x4b000084) //DMA 2 Initial source control
#define rDIDST2 (*(volatile unsigned *)0x4b000088) //DMA 2 Initial Destination
#define rDIDSTC2 (*(volatile unsigned *)0x4b00008c) //DMA 2 Initial Destination control
#define rDCON2 (*(volatile unsigned *)0x4b000090) //DMA 2 Control
#define rDSTAT2 (*(volatile unsigned *)0x4b000094) //DMA 2 Status
#define rDCSRC2 (*(volatile unsigned *)0x4b000098) //DMA 2 Current source
#define rDCDST2 (*(volatile unsigned *)0x4b00009c) //DMA 2 Current destination
#define rDMASKTRIG2 (*(volatile unsigned *)0x4b0000a0) //DMA 2 Mask trigger
#define rDISRC3 (*(volatile unsigned *)0x4b0000c0) //DMA 3 Initial source
#define rDISRCC3 (*(volatile unsigned *)0x4b0000c4) //DMA 3 Initial source control
#define rDIDST3 (*(volatile unsigned *)0x4b0000c8) //DMA 3 Initial Destination
#define rDIDSTC3 (*(volatile unsigned *)0x4b0000cc) //DMA 3 Initial Destination control
#define rDCON3 (*(volatile unsigned *)0x4b0000d0) //DMA 3 Control
#define rDSTAT3 (*(volatile unsigned *)0x4b0000d4) //DMA 3 Status
#define rDCSRC3 (*(volatile unsigned *)0x4b0000d8) //DMA 3 Current source
#define rDCDST3 (*(volatile unsigned *)0x4b0000dc) //DMA 3 Current destination
#define rDMASKTRIG3 (*(volatile unsigned *)0x4b0000e0) //DMA 3 Mask trigger
// CLOCK & POWER MANAGEMENT
#define rLOCKTIME (*(volatile unsigned *)0x4c000000) //PLL lock time counter
#define rMPLLCON (*(volatile unsigned *)0x4c000004) //MPLL Control
#define rUPLLCON (*(volatile unsigned *)0x4c000008) //UPLL Control
#define rCLKCON (*(volatile unsigned *)0x4c00000c) //Clock generator control
#define rCLKSLOW (*(volatile unsigned *)0x4c000010) //Slow clock control
#define rCLKDIVN (*(volatile unsigned *)0x4c000014) //Clock divider control
// LCD CONTROLLER
#define rLCDCON1 (*(volatile unsigned *)0x4d000000) //LCD control 1
#define rLCDCON2 (*(volatile unsigned *)0x4d000004) //LCD control 2
#define rLCDCON3 (*(volatile unsigned *)0x4d000008) //LCD control 3
#define rLCDCON4 (*(volatile unsigned *)0x4d00000c) //LCD control 4
#define rLCDCON5 (*(volatile unsigned *)0x4d000010) //LCD control 5
#define rLCDSADDR1 (*(volatile unsigned *)0x4d000014) //STN/TFT Frame buffer start address 1
#define rLCDSADDR2 (*(volatile unsigned *)0x4d000018) //STN/TFT Frame buffer start address 2
#define rLCDSADDR3 (*(volatile unsigned *)0x4d00001c) //STN/TFT Virtual screen address set
#define rREDLUT (*(volatile unsigned *)0x4d000020) //STN Red lookup table
#define rGREENLUT (*(volatile unsigned *)0x4d000024) //STN Green lookup table
#define rBLUELUT (*(volatile unsigned *)0x4d000028) //STN Blue lookup table
#define rDITHMODE (*(volatile unsigned *)0x4d00004c) //STN Dithering mode
#define rTPAL (*(volatile unsigned *)0x4d000050) //TFT Temporary palette
#define rLCDINTPND (*(volatile unsigned *)0x4d000054) //LCD Interrupt pending
#define rLCDSRCPND (*(volatile unsigned *)0x4d000058) //LCD Interrupt source
#define rLCDINTMSK (*(volatile unsigned *)0x4d00005c) //LCD Interrupt mask
#define rLPCSEL (*(volatile unsigned *)0x4d000060) //LPC3600 Control
#define PALETTE 0x4d000400 //Palette start address
// NAND flash
#define rNFCONF (*(volatile unsigned *)0x4e000000) //NAND Flash configuration
#define rNFCMD (*(volatile unsigned *)0x4e000004) //NADD Flash command
#define rNFADDR (*(volatile unsigned *)0x4e000008) //NAND Flash address
#define rNFDATA (*(volatile unsigned *)0x4e00000c) //NAND Flash data
#define rNFSTAT (*(volatile unsigned *)0x4e000010) //NAND Flash operation status
#define rNFECC (*(volatile unsigned *)0x4e000014) //NAND Flash ECC
// UART
#define rULCON0 (*(volatile unsigned *)0x50000000) //UART 0 Line control
#define rUCON0 (*(volatile unsigned *)0x50000004) //UART 0 Control
#define rUFCON0 (*(volatile unsigned *)0x50000008) //UART 0 FIFO control
#define rUMCON0 (*(volatile unsigned *)0x5000000c) //UART 0 Modem control
#define rUTRSTAT0 (*(volatile unsigned *)0x50000010) //UART 0 Tx/Rx status
#define rUERSTAT0 (*(volatile unsigned *)0x50000014) //UART 0 Rx error status
#define rUFSTAT0 (*(volatile unsigned *)0x50000018) //UART 0 FIFO status
#define rUMSTAT0 (*(volatile unsigned *)0x5000001c) //UART 0 Modem status
#define rUBRDIV0 (*(volatile unsigned *)0x50000028) //UART 0 Baud rate divisor
#define rULCON1 (*(volatile unsigned *)0x50004000) //UART 1 Line control
#define rUCON1 (*(volatile unsigned *)0x50004004) //UART 1 Control
#define rUFCON1 (*(volatile unsigned *)0x50004008) //UART 1 FIFO control
#define rUMCON1 (*(volatile unsigned *)0x5000400c) //UART 1 Modem control
#define rUTRSTAT1 (*(volatile unsigned *)0x50004010) //UART 1 Tx/Rx status
#define rUERSTAT1 (*(volatile unsigned *)0x50004014) //UART 1 Rx error status
#define rUFSTAT1 (*(volatile unsigned *)0x50004018) //UART 1 FIFO status
#define rUMSTAT1 (*(volatile unsigned *)0x5000401c) //UART 1 Modem status
#define rUBRDIV1 (*(volatile unsigned *)0x50004028) //UART 1 Baud rate divisor
#define rULCON2 (*(volatile unsigned *)0x50008000) //UART 2 Line control
#define rUCON2 (*(volatile unsigned *)0x50008004) //UART 2 Control
#define rUFCON2 (*(volatile unsigned *)0x50008008) //UART 2 FIFO control
#define rUMCON2 (*(volatile unsigned *)0x5000800c) //UART 2 Modem control
#define rUTRSTAT2 (*(volatile unsigned *)0x50008010) //UART 2 Tx/Rx status
#define rUERSTAT2 (*(volatile unsigned *)0x50008014) //UART 2 Rx error status
#define rUFSTAT2 (*(volatile unsigned *)0x50008018) //UART 2 FIFO status
#define rUMSTAT2 (*(volatile unsigned *)0x5000801c) //UART 2 Modem status
#define rUBRDIV2 (*(volatile unsigned *)0x50008028) //UART 2 Baud rate divisor
#ifdef __BIG_ENDIAN
#define rUTXH0 (*(volatile unsigned char *)0x50000023) //UART 0 Transmission Hold
#define rURXH0 (*(volatile unsigned char *)0x50000027) //UART 0 Receive buffer
#define rUTXH1 (*(volatile unsigned char *)0x50004023) //UART 1 Transmission Hold
#define rURXH1 (*(volatile unsigned char *)0x50004027) //UART 1 Receive buffer
#define rUTXH2 (*(volatile unsigned char *)0x50008023) //UART 2 Transmission Hold
#define rURXH2 (*(volatile unsigned char *)0x50008027) //UART 2 Receive buffer
#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000023)=(unsigned char)(ch)
#define RdURXH0() (*(volatile unsigned char *)0x50000027)
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004023)=(unsigned char)(ch)
#define RdURXH1() (*(volatile unsigned char *)0x50004027)
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008023)=(unsigned char)(ch)
#define RdURXH2() (*(volatile unsigned char *)0x50008027)
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -