/* * Definitions for talking to the PMU.  The PMU is a microcontroller * which controls battery charging and system power on PowerBook 3400 * and 2400 models as well as the RTC and various other things. * * Copyright (C) 1998 Paul Mackerras. */#include <linux/config.h>/* * PMU commands */#define PMU_POWER_CTRL0		0x10	/* control power of some devices */#define PMU_POWER_CTRL		0x11	/* control power of some devices */#define PMU_ADB_CMD		0x20	/* send ADB packet */#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */#define PMU_SET_RTC		0x30	/* set real-time clock */#define PMU_READ_RTC		0x38	/* read real-time clock */#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */#define PMU_INT_ACK		0x78	/* read interrupt bits */#define PMU_SHUTDOWN		0x7e	/* turn power off */#define PMU_SLEEP		0x7f	/* put CPU to sleep */#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */#define PMU_RESET		0xd0	/* reset CPU */#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */#define PMU_GET_COVER		0xdc	/* report cover open/closed */#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake *//* Bits to use with the PMU_POWER_CTRL0 command */#define PMU_POW0_ON		0x80	/* OR this to power ON the device */#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) *//* Bits to use with the PMU_POWER_CTRL command */#define PMU_POW_ON		0x80	/* OR this to power ON the device */#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */#define PMU_POW_BACKLIGHT	0x01	/* backlight power */#define PMU_POW_CHARGER		0x02	/* battery charger power */#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) *//* Bits in PMU interrupt and interrupt mask bytes */#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */#define PMU_INT_BATTERY		0x20#define PMU_INT_WAKEUP		0x40#define PMU_INT_TICK		0x80	/* 1-second tick interrupt *//* Kind of PMU (model) */enum {	PMU_UNKNOWN,	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */	PMU_HEATHROW_BASED,	/* PowerBook G3 series */	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */};/* PMU PMU_POWER_EVENTS commands */enum {	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,};/* Power events wakeup bits */enum {	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,	PMU_PWR_WAKEUP_RING		= 0x10,};	/* * Ioctl commands for the /dev/pmu device */#include <linux/ioctl.h>/* no param */#define PMU_IOC_SLEEP		_IO('B', 0)/* out param: u32*	backlight value: 0 to 15 */#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, sizeof(__u32*))/* in param: u32	backlight value: 0 to 15 */#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, sizeof(__u32))/* out param: u32*	PMU model */#define PMU_IOC_GET_MODEL	_IOR('B', 3, sizeof(__u32*))/* out param: u32*	has_adb: 0 or 1 */#define PMU_IOC_HAS_ADB		_IOR('B', 4, sizeof(__u32*)) #ifdef __KERNEL__extern int find_via_pmu(void);extern int via_pmu_start(void);extern int pmu_request(struct adb_request *req,		void (*done)(struct adb_request *), int nbytes, ...);extern void pmu_poll(void);/* For use before switching interrupts off for a long time; * warning: not stackable */extern void pmu_suspend(void);extern void pmu_resume(void);extern void pmu_enable_irled(int on);extern void pmu_restart(void);extern void pmu_shutdown(void);extern int pmu_present(void);extern int pmu_get_model(void);#ifdef CONFIG_PMAC_PBOOK/* * Stuff for putting the powerbook to sleep and waking it again. * */#include <linux/list.h>struct pmu_sleep_notifier{	int (*notifier_call)(struct pmu_sleep_notifier *self, int when);	int priority;	struct list_head list;};/* Code values for calling sleep/wakeup handlers * * Note: If a sleep request got cancelled, all drivers will get * the PBOOK_SLEEP_REJECT, even those who didn't get the PBOOK_SLEEP_REQUEST. */#define PBOOK_SLEEP_REQUEST	1#define PBOOK_SLEEP_NOW		2#define PBOOK_SLEEP_REJECT	3#define PBOOK_WAKE		4/* Result codes returned by the notifiers */#define PBOOK_SLEEP_OK		0#define PBOOK_SLEEP_REFUSE	-1/* priority levels in notifiers */#define SLEEP_LEVEL_VIDEO	100	/* Video driver (first wake) */#define SLEEP_LEVEL_SOUND	90	/* Sound driver */#define SLEEP_LEVEL_MEDIABAY	80	/* Media bay driver */#define SLEEP_LEVEL_BLOCK	70	/* IDE, SCSI */#define SLEEP_LEVEL_NET		60	/* bmac */#define SLEEP_LEVEL_ADB		50	/* ADB */#define SLEEP_LEVEL_MISC	30	/* Anything */#define SLEEP_LEVEL_LAST	0	/* Anything *//* special register notifier functions */int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier);int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier);#endif /* CONFIG_PMAC_PBOOK */#endif	/* __KERNEL__ */