* Description    : Request the CAN cell to enter sleep mode
* Input 1        : CAN_WAKEUP_ON_EXT or CAN_WAKEUP_ON_CAN
* Output         : None
* Return         : None
*******************************************************************************/
void CAN_SleepRequest(u32 WakeupMode);

/*******************************************************************************
* Function Name  : CAN_SetUnusedMsgObj
* Description    : Configure the message object as unused
* Input 1        : message object number, from 0 to 31
* Output         : None
* Return         : None
*******************************************************************************/
void CAN_SetUnusedMsgObj(u32 msgobj);

/*******************************************************************************
* Function Name  : CAN_SetTxMsgObj
* Description    : Configure the message object as TX
* Input 1        : message object number, from 0 to 31
* Input 2        : CAN_STD_ID or CAN_EXT_ID
* Output         : None
* Return         : None
*******************************************************************************/
void CAN_SetTxMsgObj(u32 msgobj, u32 idType);

/*******************************************************************************
* Function Name  : CAN_SetRxMsgObj
* Description    : Configure the message object as RX
* Input 1        : message object number, from 0 to 31
* Input 2        : CAN_STD_ID or CAN_EXT_ID
* Input 3        : low part of the identifier range used for acceptance filtering
* Input 4        : high part of the identifier range used for acceptance filtering
* Input 5        : TRUE for a single receive object or a FIFO receive object that
*                  is the last one of the FIFO
*                  FALSE for a FIFO receive object that is not the last one
* Output         : None
* Return         : None
*******************************************************************************/
void CAN_SetRxMsgObj(u32 msgobj, u32 idType, u32 idLow, u32 idHigh, bool singleOrFifoLast);

/*******************************************************************************
* Function Name  : CAN_InvalidateAllMsgObj
* Description    : Configure all the message objects as unused
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void CAN_InvalidateAllMsgObj(void);

/*******************************************************************************
* Function Name  : CAN_Init
* Description    : Initialize the CAN cell and set the bitrate
* Input 1        : any binary value formed from the CAN_CTL_xxx defines
* Input 2        : one of the CAN_BITRATE_xxx defines
* Output         : None
* Return         : None
*******************************************************************************/
void CAN_Init(u8 mask, u32 bitrate);

/*******************************************************************************
* Function Name  : CAN_ReleaseMessage
* Description    : Release the message object
* Input 1        : message object number, from 0 to 31
* Output         : None
* Return         : None
*******************************************************************************/
void CAN_ReleaseMessage(u32 msgobj);

/*******************************************************************************
* Function Name  : CAN_ReleaseTxMessage
* Description    : Release the transmit message object
* Input 1        : message object number, from 0 to 31
* Output         : None
* Return         : None
* Note           : assume that message interface 0 is free
*******************************************************************************/
inline void CAN_ReleaseTxMessage(u32 msgobj)
{
	CAN->sMsgObj[0].CMR = CAN_CMR_CLRINTPND | CAN_CMR_TXRQST;
	CAN->sMsgObj[0].CRR = 1 + msgobj;
}

/*******************************************************************************
* Function Name  : CAN_ReleaseRxMessage
* Description    : Release the receive message object
* Input 1        : message object number, from 0 to 31
* Output         : None
* Return         : None
* Note           : assume that message interface 1 is free
*******************************************************************************/
inline void CAN_ReleaseRxMessage(u32 msgobj)
{
	CAN->sMsgObj[1].CMR = CAN_CMR_CLRINTPND | CAN_CMR_TXRQST;
	CAN->sMsgObj[1].CRR = 1 + msgobj;
}

/*******************************************************************************
* Function Name  : CAN_SendMessage
* Description    : Start transmission of a message
* Input 1        : message object number, from 0 to 31
* Input 2        : pointer to the message structure containing data to transmit
* Output         : None
* Return         : 1 if transmission was OK, else 0
*******************************************************************************/
u32  CAN_SendMessage(u32 msgobj, canmsg* pCanMsg);

/*******************************************************************************
* Function Name  : CAN_ReceiveMessage
* Description    : Get the message, if received
* Input 1        : message object number, from 0 to 31
* Input 2        : if TRUE, the message object is released when getting the data
*                  if FALSE, the message object is not released
* Input 3        : pointer to the message structure where received data is stored
* Output         : None
* Return         : 1 if reception was OK, else 0 (no message pending)
*******************************************************************************/
u32  CAN_ReceiveMessage(u32 msgobj, bool release, canmsg* pCanMsg);

/*******************************************************************************
* Function Name  : CAN_WaitEndOfTx
* Description    : Wait until current transmission is finished
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void CAN_WaitEndOfTx(void);

/*******************************************************************************
* Function Name  : CAN_BasicSendMessage
* Description    : Start transmission of a message in BASIC mode
* Input 1        : pointer to the message structure containing data to transmit
* Output         : None
* Return         : 1 if transmission was OK, else 0
* Note           : CAN must be in BASIC mode
*******************************************************************************/
u32 CAN_BasicSendMessage(canmsg* pCanMsg);

/*******************************************************************************
* Function Name  : CAN_BasicReceiveMessage
* Description    : Get the message in BASIC mode, if received
* Input 1        : pointer to the message structure where received data is stored
* Output         : None
* Return         : 1 if reception was OK, else 0 (no message pending)
* Note           : CAN must be in BASIC mode
*******************************************************************************/
u32 CAN_BasicReceiveMessage(canmsg* pCanMsg);

/*******************************************************************************
* Function Name  : CAN_IsMessageWaiting
* Description    : Test the waiting status of a received message
* Input 1        : message object number, from 0 to 31
* Output         : None
* Return         : A non-zero value if the corresponding message object has
*                  received a message waiting to be copied, else 0
*******************************************************************************/
inline u32 CAN_IsMessageWaiting(u32 msgobj)
{
  return (msgobj < 16 ? CAN->ND1R & (1 << msgobj) : CAN->ND2R & (1 << (msgobj-16)));
}

/*******************************************************************************
* Function Name  : CAN_IsTransmitRequested
* Description    : Test the request status of a transmitted message
* Input 1        : message object number, from 0 to 31
* Output         : None
* Return         : A non-zero value if the corresponding message is requested
*                  to transmit, else 0
*******************************************************************************/
inline u32 CAN_IsTransmitRequested(u32 msgobj)
{
  return (msgobj < 16 ? CAN->TR1R & (1 << msgobj) : CAN->TR2R & (1 << (msgobj-16)));
}

/*******************************************************************************
* Function Name  : CAN_IsInterruptPending
* Description    : Test the interrupt status of a message object
* Input 1        : message object number, from 0 to 31
* Output         : None
* Return         : A non-zero value if the corresponding message has an interrupt
*                  pending, else 0
*******************************************************************************/
inline u32 CAN_IsInterruptPending(u32 msgobj)
{
  return (msgobj < 16 ? CAN->IP1R & (1 << msgobj) : CAN->IP2R & (1 << (msgobj-16)));
}

/*******************************************************************************
* Function Name  : CAN_IsObjectValid
* Description    : Test the validity of a message object (ready to use)
* Input 1        : message object number, from 0 to 31
* Output         : None
* Return         : A non-zero value if the corresponding message object is valid,
*                  else 0
*******************************************************************************/
inline u32 CAN_IsObjectValid(u32 msgobj)
{
  return (msgobj < 16 ? CAN->MV1R & (1 << msgobj) : CAN->MV2R & (1 << (msgobj-16)));
}

#endif /* __CAN_H */

/******************* (C) COPYRIGHT 2003 STMicroelectronics *****END OF FILE****/