#include "ATMEL89X51.H"
#include <intrins.h>
#define LED_SET P2					//點亮哪一位數碼管選擇端口
//#define LED_OE	P3_6				//使能數據端口輸出
#define LED_data P0					//設定P0口為數據輸入端口
#define ON 0						//設0為開
#define OFF 1						//設1為關
unsigned play_bit[8] = {0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80}; //確定哪一位數碼管顯示
unsigned char seg[10]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};  //0~~9段碼  //0~~9段碼

void delay(unsigned char temp)
{	
 	unsigned char i;
    for(i=0;i<temp;i++);
}

void led_disp(unsigned char num,unsigned char vdata,unsigned char on_switch) //顯示驅動函數 on_switch = 0 ,開，on_switch = 1，關
{
	LED_SET =  ~play_bit[num-1];		//選定哪一位數碼管顯示
	if(on_switch)
		LED_data = 0;
	else
		LED_data = vdata;			//送字形碼
		delay(200);					//消影
		LED_data =0x0;
	
}


void led_play(long cont)		//十進制數顯示驅動函數
{
		int i;
		for(i=0;i<8;i++)
		{	
			switch(i)
			{
				case 0:	led_disp(1,seg[cont%10],0);
					break;
				case 1:	led_disp(2,seg[(cont/10)%10],0);
					break;
				case 2:	led_disp(3,seg[(cont/100)%10],0);
					break;
				case 3:	led_disp(4,seg[(cont/1000)%10],0);
					break;
				case 4:	led_disp(5,seg[(cont/10000)%10],0);
					break;
				case 5:	led_disp(6,seg[(cont/100000)%10],0);
					break;
				default:
					break;
			}
		}
}


main()
{

//	LED_OE = ON;
	while(1)
	{		
	led_play(123456);
	}
}