/*    i2c-proc.c - Part of lm_sensors, Linux kernel modules for hardware                monitoring    Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl> and    Mark D. Studebaker <mdsxyz123@yahoo.com>    This program is free software; you can redistribute it and/or modify    it under the terms of the GNU General Public License as published by    the Free Software Foundation; either version 2 of the License, or    (at your option) any later version.    This program is distributed in the hope that it will be useful,    but WITHOUT ANY WARRANTY; without even the implied warranty of    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the    GNU General Public License for more details.    You should have received a copy of the GNU General Public License    along with this program; if not, write to the Free Software    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.*//*    This driver puts entries in /proc/sys/dev/sensors for each I2C device*/#include <linux/version.h>#include <linux/module.h>#include <linux/kernel.h>#include <linux/slab.h>#include <linux/ctype.h>#include <linux/sysctl.h>#include <linux/proc_fs.h>#include <linux/ioport.h>#include <asm/uaccess.h>#include <linux/i2c.h>#include <linux/i2c-proc.h>#include <linux/init.h>/* FIXME need i2c versioning */#define LM_DATE "20010825"#define LM_VERSION "2.6.1"#ifndef THIS_MODULE#define THIS_MODULE NULL#endifstatic int i2c_create_name(char **name, const char *prefix,			       struct i2c_adapter *adapter, int addr);static int i2c_parse_reals(int *nrels, void *buffer, int bufsize,			       long *results, int magnitude);static int i2c_write_reals(int nrels, void *buffer, int *bufsize,			       long *results, int magnitude);static int i2c_proc_chips(ctl_table * ctl, int write,			      struct file *filp, void *buffer,			      size_t * lenp);static int i2c_sysctl_chips(ctl_table * table, int *name, int nlen,				void *oldval, size_t * oldlenp,				void *newval, size_t newlen,				void **context);int __init sensors_init(void);#define SENSORS_ENTRY_MAX 20static struct ctl_table_header *i2c_entries[SENSORS_ENTRY_MAX];static struct i2c_client *i2c_clients[SENSORS_ENTRY_MAX];static unsigned short i2c_inodes[SENSORS_ENTRY_MAX];#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,1)static void i2c_fill_inode(struct inode *inode, int fill);static void i2c_dir_fill_inode(struct inode *inode, int fill);#endif			/* LINUX_VERSION_CODE < KERNEL_VERSION(2,3,1) */static ctl_table sysctl_table[] = {	{CTL_DEV, "dev", NULL, 0, 0555},	{0},	{DEV_SENSORS, "sensors", NULL, 0, 0555},	{0},	{0, NULL, NULL, 0, 0555},	{0}};static ctl_table i2c_proc_dev_sensors[] = {	{SENSORS_CHIPS, "chips", NULL, 0, 0644, NULL, &i2c_proc_chips,	 &i2c_sysctl_chips},	{0}};static ctl_table i2c_proc_dev[] = {	{DEV_SENSORS, "sensors", NULL, 0, 0555, i2c_proc_dev_sensors},	{0},};static ctl_table i2c_proc[] = {	{CTL_DEV, "dev", NULL, 0, 0555, i2c_proc_dev},	{0}};static struct ctl_table_header *i2c_proc_header;static int i2c_initialized;/* This returns a nice name for a new directory; for example lm78-isa-0310   (for a LM78 chip on the ISA bus at port 0x310), or lm75-i2c-3-4e (for   a LM75 chip on the third i2c bus at address 0x4e).     name is allocated first. */int i2c_create_name(char **name, const char *prefix,			struct i2c_adapter *adapter, int addr){	char name_buffer[50];	int id;	if (i2c_is_isa_adapter(adapter))		sprintf(name_buffer, "%s-isa-%04x", prefix, addr);	else {		if ((id = i2c_adapter_id(adapter)) < 0)			return -ENOENT;		sprintf(name_buffer, "%s-i2c-%d-%02x", prefix, id, addr);	}	*name = kmalloc(strlen(name_buffer) + 1, GFP_KERNEL);	if (!*name) {		printk (KERN_WARNING "i2c_create_name: not enough memory\n");		return -ENOMEM;	}	strcpy(*name, name_buffer);	return 0;}/* This rather complex function must be called when you want to add an entry   to /proc/sys/dev/sensors/chips. It also creates a new directory within    /proc/sys/dev/sensors/.   ctl_template should be a template of the newly created directory. It is   copied in memory. The extra2 field of each file is set to point to client.   If any driver wants subdirectories within the newly created directory,   this function must be updated!    controlling_mod is the controlling module. It should usually be   THIS_MODULE when calling. Note that this symbol is not defined in   kernels before 2.3.13; define it to NULL in that case. We will not use it   for anything older than 2.3.27 anyway. */int i2c_register_entry(struct i2c_client *client, const char *prefix,			   ctl_table * ctl_template,			   struct module *controlling_mod){	int i, res, len, id;	ctl_table *new_table;	char *name;	struct ctl_table_header *new_header;	if ((res = i2c_create_name(&name, prefix, client->adapter,				       client->addr))) return res;	for (id = 0; id < SENSORS_ENTRY_MAX; id++)		if (!i2c_entries[id]) {			break;		}	if (id == SENSORS_ENTRY_MAX) {		kfree(name);		return -ENOMEM;	}	id += 256;	len = 0;	while (ctl_template[len].procname)		len++;	len += 7;	if (!(new_table = kmalloc(sizeof(ctl_table) * len, GFP_KERNEL))) {		kfree(name);		return -ENOMEM;	}	memcpy(new_table, sysctl_table, 6 * sizeof(ctl_table));	new_table[0].child = &new_table[2];	new_table[2].child = &new_table[4];	new_table[4].child = &new_table[6];	new_table[4].procname = name;	new_table[4].ctl_name = id;	memcpy(new_table + 6, ctl_template, (len - 6) * sizeof(ctl_table));	for (i = 6; i < len; i++)		new_table[i].extra2 = client;	if (!(new_header = register_sysctl_table(new_table, 0))) {		kfree(new_table);		kfree(name);		return -ENOMEM;	}	i2c_entries[id - 256] = new_header;	i2c_clients[id - 256] = client;#ifdef DEBUG	if (!new_header || !new_header->ctl_table ||	    !new_header->ctl_table->child ||	    !new_header->ctl_table->child->child ||	    !new_header->ctl_table->child->child->de) {		printk		    ("i2c-proc.o: NULL pointer when trying to install fill_inode fix!\n");		return id;	}#endif				/* DEBUG */	i2c_inodes[id - 256] =	    new_header->ctl_table->child->child->de->low_ino;#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,27))	new_header->ctl_table->child->child->de->owner = controlling_mod;#else	new_header->ctl_table->child->child->de->fill_inode =	    &i2c_dir_fill_inode;#endif	/* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,27)) */	return id;}void i2c_deregister_entry(int id){	ctl_table *table;	char *temp;	id -= 256;	if (i2c_entries[id]) {		table = i2c_entries[id]->ctl_table;		unregister_sysctl_table(i2c_entries[id]);		/* 2-step kfree needed to keep gcc happy about const points */		(const char *) temp = table[4].procname;		kfree(temp);		kfree(table);		i2c_entries[id] = NULL;		i2c_clients[id] = NULL;	}}/* Monitor access for /proc/sys/dev/sensors; make unloading i2c-proc.o    impossible if some process still uses it or some file in it */void i2c_fill_inode(struct inode *inode, int fill){	if (fill)		MOD_INC_USE_COUNT;	else		MOD_DEC_USE_COUNT;}/* Monitor access for /proc/sys/dev/sensors/ directories; make unloading   the corresponding module impossible if some process still uses it or   some file in it */void i2c_dir_fill_inode(struct inode *inode, int fill){	int i;	struct i2c_client *client;#ifdef DEBUG	if (!inode) {		printk("i2c-proc.o: Warning: inode NULL in fill_inode()\n");		return;	}#endif				/* def DEBUG */	for (i = 0; i < SENSORS_ENTRY_MAX; i++)		if (i2c_clients[i]		    && (i2c_inodes[i] == inode->i_ino)) break;#ifdef DEBUG	if (i == SENSORS_ENTRY_MAX) {		printk		    ("i2c-proc.o: Warning: inode (%ld) not found in fill_inode()\n",		     inode->i_ino);		return;	}#endif				/* def DEBUG */	client = i2c_clients[i];	if (fill)		client->driver->inc_use(client);	else		client->driver->dec_use(client);}int i2c_proc_chips(ctl_table * ctl, int write, struct file *filp,		       void *buffer, size_t * lenp){	char BUF[SENSORS_PREFIX_MAX + 30];	int buflen, curbufsize, i;	struct ctl_table *client_tbl;	if (write)		return 0;	/* If buffer is size 0, or we try to read when not at the start, we	   return nothing. Note that I think writing when not at the start	   does not work either, but anyway, this is straight from the kernel	   sources. */	if (!*lenp || (filp->f_pos && !write)) {		*lenp = 0;		return 0;	}	curbufsize = 0;	for (i = 0; i < SENSORS_ENTRY_MAX; i++)		if (i2c_entries[i]) {			client_tbl =			    i2c_entries[i]->ctl_table->child->child;			buflen =			    sprintf(BUF, "%d\t%s\n", client_tbl->ctl_name,				    client_tbl->procname);			if (buflen + curbufsize > *lenp)				buflen = *lenp - curbufsize;			if(copy_to_user(buffer, BUF, buflen))				return -EFAULT;			curbufsize += buflen;			(char *) buffer += buflen;		}	*lenp = curbufsize;	filp->f_pos += curbufsize;	return 0;}int i2c_sysctl_chips(ctl_table * table, int *name, int nlen,			 void *oldval, size_t * oldlenp, void *newval,			 size_t newlen, void **context){	struct i2c_chips_data data;	int i, oldlen, nrels, maxels,ret=0;	struct ctl_table *client_tbl;	if (oldval && oldlenp && !((ret = get_user(oldlen, oldlenp))) && 	    oldlen) {		maxels = oldlen / sizeof(struct i2c_chips_data);		nrels = 0;		for (i = 0; (i < SENSORS_ENTRY_MAX) && (nrels < maxels);		     i++)			if (i2c_entries[i]) {				client_tbl =				    i2c_entries[i]->ctl_table->child->				    child;				data.sysctl_id = client_tbl->ctl_name;				strcpy(data.name, client_tbl->procname);				if(copy_to_user(oldval, &data,					     sizeof(struct						    i2c_chips_data)))					return -EFAULT;				(char *) oldval +=				    sizeof(struct i2c_chips_data);				nrels++;			}		oldlen = nrels * sizeof(struct i2c_chips_data);		if(put_user(oldlen, oldlenp))			return -EFAULT;	}	return ret;}/* This funcion reads or writes a 'real' value (encoded by the combination   of an integer and a magnitude, the last is the power of ten the value   should be divided with) to a /proc/sys directory. To use this function,   you must (before registering the ctl_table) set the extra2 field to the   client, and the extra1 field to a function of the form:      void func(struct i2c_client *client, int operation, int ctl_name,                int *nrels_mag, long *results)   This function can be called for three values of operation. If operation   equals SENSORS_PROC_REAL_INFO, the magnitude should be returned in    nrels_mag. If operation equals SENSORS_PROC_REAL_READ, values should   be read into results. nrels_mag should return the number of elements   read; the maximum number is put in it on entry. Finally, if operation   equals SENSORS_PROC_REAL_WRITE, the values in results should be   written to the chip. nrels_mag contains on entry the number of elements   found.   In all cases, client points to the client we wish to interact with,   and ctl_name is the SYSCTL id of the file we are accessing. */int i2c_proc_real(ctl_table * ctl, int write, struct file *filp,		      void *buffer, size_t * lenp){#define MAX_RESULTS 32	int mag, nrels = MAX_RESULTS;	long results[MAX_RESULTS];	i2c_real_callback callback = ctl->extra1;	struct i2c_client *client = ctl->extra2;	int res;	/* If buffer is size 0, or we try to read when not at the start, we	   return nothing. Note that I think writing when not at the start	   does not work either, but anyway, this is straight from the kernel	   sources. */	if (!*lenp || (filp->f_pos && !write)) {		*lenp = 0;		return 0;	}	/* Get the magnitude */	callback(client, SENSORS_PROC_REAL_INFO, ctl->ctl_name, &mag,		 NULL);	if (write) {		/* Read the complete input into results, converting to longs */		res = i2c_parse_reals(&nrels, buffer, *lenp, results, mag);		if (res)			return res;		if (!nrels)			return 0;		/* Now feed this information back to the client */		callback(client, SENSORS_PROC_REAL_WRITE, ctl->ctl_name,			 &nrels, results);		filp->f_pos += *lenp;		return 0;	} else {		/* read */		/* Get the information from the client into results */		callback(client, SENSORS_PROC_REAL_READ, ctl->ctl_name,			 &nrels, results);		/* And write them to buffer, converting to reals */		res = i2c_write_reals(nrels, buffer, lenp, results, mag);		if (res)			return res;		filp->f_pos += *lenp;		return 0;	}}/* This function is equivalent to i2c_proc_real, only it interacts with   the sysctl(2) syscall, and returns no reals, but integers */int i2c_sysctl_real(ctl_table * table, int *name, int nlen,			void *oldval, size_t * oldlenp, void *newval,			size_t newlen, void **context){	long results[MAX_RESULTS];	int oldlen, nrels = MAX_RESULTS,ret=0;	i2c_real_callback callback = table->extra1;	struct i2c_client *client = table->extra2;	/* Check if we need to output the old values */	if (oldval && oldlenp && !((ret=get_user(oldlen, oldlenp))) && oldlen) {		callback(client, SENSORS_PROC_REAL_READ, table->ctl_name,			 &nrels, results);		/* Note the rounding factor! */		if (nrels * sizeof(long) < oldlen)			oldlen = nrels * sizeof(long);		oldlen = (oldlen / sizeof(long)) * sizeof(long);		if(copy_to_user(oldval, results, oldlen))			return -EFAULT;		if(put_user(oldlen, oldlenp))			return -EFAULT;	}	if (newval && newlen) {		/* Note the rounding factor! */		newlen -= newlen % sizeof(long);		nrels = newlen / sizeof(long);		if(copy_from_user(results, newval, newlen))			return -EFAULT;		/* Get the new values back to the client */		callback(client, SENSORS_PROC_REAL_WRITE, table->ctl_name,			 &nrels, results);	}	return ret;}