README: Wind River SBC ARM7 BSP for Samsung's KS32C50100This file contains board-specific information for the SBC ARM7 targetboard.  This file documents BSP interface changes from previoussoftware or hardware versions, and notifies the user of seriouscaveats that must be noted before using this BSP.  Additionally, thetarget board's reference entry (i.e. wrSbcArm7/target.nr) providesboard-specific information necessary to run VxWorks and should be readfully before this BSP is used.--------------------------------------------------------------------------------RELEASE 1.2/18         Better handling of auto-negotiation of the PHYRELEASE 1.2/17        Tornado 2.2 support        Fix END rx error handling        Fix END polled mode        Fix non-default clock rate serial problemsRELEASE 1.2/16        ROM resident supportRELEASE 1.2/15        Big Endian support        Thumb support        Big Endian/Thumb support        Ethernet MAC address based on DIP settings        END driver registers now written using volatile        sysClkRateSet() now changes the clock rateRELEASE 1.2/14        Minor changes to the default boot lineRELEASE 1.2/13        Minor changes to support UNIX buildsRELEASE 1.2/12        Enable cache support.        Add support for launching the VxWorks image using visionWARE 2.00.RELEASE 1.2/11        Fixed Ethernet FIFO overflow problems.        Fixed crashing sysClkConnect.RELEASE 1.2/10        Added support for NVRAM.        Fixed issues with timestamp.        Cleaned up the documentation.RELEASE 1.2/9        First beta release (for Tornado 2.0).