#ifndef _CONFIG_H#define _CONFIG_H/* * Defines for what uname() should return  */#define UTS_SYSNAME "Linux"#define UTS_NODENAME "(none)"	/* set by sethostname() */#define UTS_RELEASE "0"		/* patchlevel */#define UTS_VERSION "0.12"#define UTS_MACHINE "i386"	/* hardware type *//* Don't touch these, unless you really know what your doing. */#define DEF_INITSEG	0x9000#define DEF_SYSSEG	0x1000#define DEF_SETUPSEG	0x9020#define DEF_SYSSIZE	0x3000/* * The root-device is no longer hard-coded. You can change the default * root-device by changing the line ROOT_DEV = XXX in boot/bootsect.s *//* * The keyboard is now defined in kernel/chr_dev/keyboard.S *//* * Normally, Linux can get the drive parameters from the BIOS at * startup, but if this for some unfathomable reason fails, you'd * be left stranded. For this case, you can define HD_TYPE, which * contains all necessary info on your harddisk. * * The HD_TYPE macro should look like this: * * #define HD_TYPE { head, sect, cyl, wpcom, lzone, ctl} * * In case of two harddisks, the info should be sepatated by * commas: * * #define HD_TYPE { h,s,c,wpcom,lz,ctl },{ h,s,c,wpcom,lz,ctl } *//* This is an example, two drives, first is type 2, second is type 3:#define HD_TYPE { 4,17,615,300,615,8 }, { 6,17,615,300,615,0 } NOTE: ctl is 0 for all drives with heads<=8, and ctl=8 for drives with more than 8 heads. If you want the BIOS to tell what kind of drive you have, just leave HD_TYPE undefined. This is the normal thing to do.*/#endif