?? gui.c

?? S3C2410上GPRS模塊的驅動源碼,ADS1.2編譯工程,已測試通過.附文檔.
?? C
?? 第 1 頁 / 共 2 頁
字號:
12 下一頁
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include "gui.h"
#include "lcd.h"
#include "key.h"
#include "2410iis.h"
#include "at.h"
#include "IIC_def.h"
#include "StepMotor.h"
#include "rtc.h"

extern char phone_num[30];
extern int  phone_index;
extern int gTimeIndex;
extern char gTimestr[20];
extern int a[4];
extern int gAngle;			//步進電機的角度
extern int gfreq;			//步進電機的頻率
extern int gDirectoryCtrl;  //步進電機的角度
TIME time;
void motorctrl(int id);

char *strcopy(register char *s1, const register char *s2)
{
    register char *p = s1;

    while ((*s1++ = *s2++) != 0);

    return p;
}

void GUI_cls(void)
{	
	
	int i;
	while(i++<10000);
	clrsrc(rgb(0,0,255));
	for(i=0;i<320;i++)
	{
	 setpixel(i,239,rgb(0,255,0));
	 setpixel(i+1,239,rgb(0,255,0));
	 setpixel(i+1,238,rgb(0,255,0));
	 setpixel(i,238,rgb(0,255,0));
	 setpixel(i,0,rgb(0,255,0));
	 setpixel(i+1,0,rgb(0,255,0));
	 setpixel(i+1,1,rgb(0,255,0));
	 setpixel(i,1,rgb(0,255,0));

	 }
	 
	for(i=0;i<320;i++)
	{
	 setpixel(0,i,rgb(0,255,0));
	 setpixel(1,i,rgb(0,255,0));
	 setpixel(1,i+1,rgb(0,255,0));
	 setpixel(0,i+1,rgb(0,255,0));
	 setpixel(319,i,rgb(0,255,0));
	 setpixel(318,i,rgb(0,255,0));
	 setpixel(319,i+1,rgb(0,255,0));
	 setpixel(318,i+1,rgb(0,255,0));

	 }
	 
}



void fillreverserectangle(int x0,int y0,int x1,int y1)
{
	int x;
	int y;
	COLOR mcolor;
	for(x=x0;x<=x1;x++)
	   for(y=y0;y<=y1;y++)
	   {
	   	mcolor = getpixel(x,y);
	    setpixel(x,y,~mcolor);
	   }
}

void drawbutton(PBUTTON pbutton)
{
	fillrectangle(pbutton->x0,pbutton->y0, pbutton->x0+pbutton->wide,pbutton->y0+pbutton->high,pbutton->bgcolor);
	line(pbutton->x0,pbutton->y0,pbutton->x0+pbutton->wide,pbutton->y0,pbutton->textcolor);
	line(pbutton->x0+pbutton->wide,pbutton->y0,pbutton->x0+pbutton->wide,pbutton->y0+pbutton->high,pbutton->textcolor);
	line(pbutton->x0,pbutton->y0+1,pbutton->x0+pbutton->wide,pbutton->y0+1,pbutton->textcolor);
	
	drawascii168(pbutton->x0+pbutton->text_x,pbutton->y0+pbutton->text_y,pbutton->text,pbutton->textcolor);
}

void clearbuttonlist(void)
{
	int i;
	for(i=0;i< buttonnumber;i++)
	{
		mbuttonlist[i].id = INVALIDATE_BUTTON;
		mbuttonlist[i].wide = 0;
		mbuttonlist[i].high = 0;
	}
}
		

void mainmenu(void)
{
	GUI_cls();
	buttonnumber = 10;	
	drawtext(120,230,"演示主窗口",1.2,3,rgb(255,255,0));
//	drawtext(121,231,"演示主窗口",1.2,3,rgb(255,255,0));
	
	mbuttonlist[0].id = IIS_BUTTON;
	mbuttonlist[0].x0 = 60;
	mbuttonlist[0].y0 = 170;
	mbuttonlist[0].wide =80;
	mbuttonlist[0].high = 30;
	mbuttonlist[0].text_x = 30;
	mbuttonlist[0].text_y = 20;
	mbuttonlist[0].textcolor = rgb(255,255,0);
	mbuttonlist[0].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[0].text,"IIS");
	drawbutton(&mbuttonlist[0]);
	
	mbuttonlist[1].id = CONFIG_BUTTON;
	mbuttonlist[1].x0 = 180;
	mbuttonlist[1].y0 = 170;
	mbuttonlist[1].wide =80;
	mbuttonlist[1].high = 30;
	mbuttonlist[1].text_x = 20;
	mbuttonlist[1].text_y = 20;
	mbuttonlist[1].textcolor = rgb(255,255,0);
	mbuttonlist[1].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[1].text,"Config");
	drawbutton(&mbuttonlist[1]);


	mbuttonlist[2].id = USB_BUTTON;
	mbuttonlist[2].x0 = 60;
	mbuttonlist[2].y0 = 130;
	mbuttonlist[2].wide =80;
	mbuttonlist[2].high = 30;
	mbuttonlist[2].text_x = 30;
	mbuttonlist[2].text_y = 20;
	mbuttonlist[2].textcolor = rgb(255,255,0);
	mbuttonlist[2].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[2].text,"USB");
	drawbutton(&mbuttonlist[2]);


	mbuttonlist[3].id = KBD_BUTTON;
	mbuttonlist[3].x0 = 180;
	mbuttonlist[3].y0 = 130;
	mbuttonlist[3].wide =80;
	mbuttonlist[3].high = 30;
	mbuttonlist[3].text_x = 30;
	mbuttonlist[3].text_y = 20;
	mbuttonlist[3].textcolor = rgb(255,255,0);
	mbuttonlist[3].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[3].text,"KBD");
	drawbutton(&mbuttonlist[3]);
	
	mbuttonlist[4].id = GPS_BUTTON;
	mbuttonlist[4].x0 = 60;
	mbuttonlist[4].y0 = 90;
	mbuttonlist[4].wide =80;
	mbuttonlist[4].high = 30;
	mbuttonlist[4].text_x = 30;
	mbuttonlist[4].text_y = 20;
	mbuttonlist[4].textcolor = rgb(255,255,0);
	mbuttonlist[4].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[4].text,"GPS");
	drawbutton(&mbuttonlist[4]);

	mbuttonlist[5].id = CAN_BUTTON;
	mbuttonlist[5].x0 = 180;
	mbuttonlist[5].y0 = 90;
	mbuttonlist[5].wide =80;
	mbuttonlist[5].high = 30;
	mbuttonlist[5].text_x = 30;
	mbuttonlist[5].text_y = 20;
	mbuttonlist[5].textcolor = rgb(255,255,0);
	mbuttonlist[5].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[5].text,"CAN");
	drawbutton(&mbuttonlist[5]);

	mbuttonlist[6].id = GPRS_BUTTON;
	mbuttonlist[6].x0 = 180;
	mbuttonlist[6].y0 = 50;
	mbuttonlist[6].wide =80;
	mbuttonlist[6].high = 30;
	mbuttonlist[6].text_x = 25;
	mbuttonlist[6].text_y = 20;
	mbuttonlist[6].textcolor = rgb(255,255,0);
	mbuttonlist[6].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[6].text,"GPRS");
	drawbutton(&mbuttonlist[6]);

	mbuttonlist[7].id = UART_BUTTON;
	mbuttonlist[7].x0 = 60;
	mbuttonlist[7].y0 = 50;
	mbuttonlist[7].wide =80;
	mbuttonlist[7].high = 30;
	mbuttonlist[7].text_x = 25;
	mbuttonlist[7].text_y = 20;
	mbuttonlist[7].textcolor = rgb(255,255,0);
	mbuttonlist[7].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[7].text,"Uart");
	drawbutton(&mbuttonlist[7]);
	
	mbuttonlist[8].id = BLUETOOTH_BUTTON	;
	mbuttonlist[8].x0 = 180;
	mbuttonlist[8].y0 = 10;
	mbuttonlist[8].wide =80;
	mbuttonlist[8].high = 30;
	mbuttonlist[8].text_x = 4;
	mbuttonlist[8].text_y = 20;
	mbuttonlist[8].textcolor = rgb(255,255,0);
	mbuttonlist[8].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[8].text,"BlueTooth");
	drawbutton(&mbuttonlist[8]);

	mbuttonlist[9].id = STEP_MOTOR_BUTTON;
	mbuttonlist[9].x0 = 60;
	mbuttonlist[9].y0 = 10;
	mbuttonlist[9].wide =80;
	mbuttonlist[9].high = 30;
	mbuttonlist[9].text_x = 4;
	mbuttonlist[9].text_y = 20;
	mbuttonlist[9].textcolor = rgb(255,255,0);
	mbuttonlist[9].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[9].text,"StepMotor");
	drawbutton(&mbuttonlist[9]);

	//顯示退出窗口
	drawexitbutton();

}

void GPS_win()
{

	
	COLOR mColor;
	mColor = rgb(0,255,0);
	GUI_cls();
	
	
	drawexitbutton();
	buttonnumber = 0;	
	drawtext(70,200,"ＧＰＳ衛星定位窗口",1,3,rgb(255,255,0));
	drawtext(60,150,"類別　方向　數值（度）",1,3,rgb(255,255,0));
	drawtext(60,125,"緯度",1,3,rgb(255,255,0));
	drawtext(60,100,"經度",1,3,rgb(255,255,0));

	
	line(55,157,260,157,mColor);
	line(55,132,260,132,mColor);
	line(55,107,260,107,mColor);
	line(55,82,260,82,mColor);

	
	line(55,157,55,82,mColor);
	line(100,157,100,82,mColor);
	line(170,157,170,82,mColor);
	line(260,157,260,82,mColor);
	

}


void Config_win(void)
{
	int i;
	GUI_cls();

	
	drawexitbutton();
	buttonnumber = 2;	
	drawtext(75,200,"時間和校準設置窗口",1,3,rgb(255,255,0));
	
	mbuttonlist[0].id = TIME_BUTTON;
	mbuttonlist[0].x0 = 60;
	mbuttonlist[0].y0 = 95;
	mbuttonlist[0].wide =80;
	mbuttonlist[0].high = 30;
	mbuttonlist[0].text_x = 25;
	mbuttonlist[0].text_y = 20;
	mbuttonlist[0].textcolor = rgb(255,255,0);
	mbuttonlist[0].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[0].text,"Time");
	drawbutton(&mbuttonlist[0]);
	
	mbuttonlist[1].id = ADJUST_BUTTON;
	mbuttonlist[1].x0 = 180;
	mbuttonlist[1].y0 = 95;
	mbuttonlist[1].wide =80;
	mbuttonlist[1].high = 30;
	mbuttonlist[1].text_x = 16;
	mbuttonlist[1].text_y = 20;
	mbuttonlist[1].textcolor = rgb(255,255,0);
	mbuttonlist[1].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[1].text,"Adjust");
	drawbutton(&mbuttonlist[1]);

}

void Step_Motor_win(void)
{

	char buf[30];
	GUI_cls();
	
	drawexitbutton();
	buttonnumber = 7;	
	drawtext(80,220,"步進電機演示窗口",1,3,rgb(255,255,0));

	drawtext(70,140,"速度：　級",1,0,rgb(255,255,0));	
	drawtext(70,100,"角度：　級",1,0,rgb(255,255,0));	

	mbuttonlist[0].id = MOTOR_SPEED_UP_BUTTON;
	mbuttonlist[0].x0 = 200;
	mbuttonlist[0].y0 = 115;
	mbuttonlist[0].wide =28;
	mbuttonlist[0].high = 30;
	mbuttonlist[0].text_x = 10;
	mbuttonlist[0].text_y = 20;
	mbuttonlist[0].textcolor = rgb(255,255,0);
	mbuttonlist[0].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[0].text,"+");
	drawbutton(&mbuttonlist[0]);
	
	mbuttonlist[1].id = MOTOR_SPEED_DOWN_BUTTON;
	mbuttonlist[1].x0 = 160;
	mbuttonlist[1].y0 = 115;
	mbuttonlist[1].wide =28;
	mbuttonlist[1].high = 30;
	mbuttonlist[1].text_x = 10;
	mbuttonlist[1].text_y = 20;
	mbuttonlist[1].textcolor = rgb(255,255,0);
	mbuttonlist[1].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[1].text,"-");
	drawbutton(&mbuttonlist[1]);

	mbuttonlist[2].id = MOTOR_ANGLE_UP_BUTTON;
	mbuttonlist[2].x0 = 160;
	mbuttonlist[2].y0 = 75;
	mbuttonlist[2].wide =28;
	mbuttonlist[2].high = 30;
	mbuttonlist[2].text_x = 10;
	mbuttonlist[2].text_y = 20;
	mbuttonlist[2].textcolor = rgb(255,255,0);
	mbuttonlist[2].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[2].text,"-");
	drawbutton(&mbuttonlist[2]);
	

	mbuttonlist[3].id = MOTOR_ANGLE_DOWN_BUTTON;
	mbuttonlist[3].x0 = 200;
	mbuttonlist[3].y0 = 75;
	mbuttonlist[3].wide =28;
	mbuttonlist[3].high = 30;
	mbuttonlist[3].text_x = 10;
	mbuttonlist[3].text_y = 20;
	mbuttonlist[3].textcolor = rgb(255,255,0);
	mbuttonlist[3].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[3].text,"+");
	drawbutton(&mbuttonlist[3]);

	mbuttonlist[4].id = START_BUTTON;
	mbuttonlist[4].x0 = 60;
	mbuttonlist[4].y0 = 25;
	mbuttonlist[4].wide =80;
	mbuttonlist[4].high = 30;
	mbuttonlist[4].text_x = 20;
	mbuttonlist[4].text_y = 20;
	mbuttonlist[4].textcolor = rgb(255,255,0);
	mbuttonlist[4].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[4].text,"Start");
	drawbutton(&mbuttonlist[4]);

	mbuttonlist[5].id = STOP_BUTTON;
	mbuttonlist[5].x0 = 180;
	mbuttonlist[5].y0 = 25;
	mbuttonlist[5].wide =80;
	mbuttonlist[5].high = 30;
	mbuttonlist[5].text_x = 24;
	mbuttonlist[5].text_y = 20;
	mbuttonlist[5].textcolor = rgb(255,255,0);
	mbuttonlist[5].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[5].text,"Stop");
	drawbutton(&mbuttonlist[5]);

	drawtext(70,175,"方向：",1,0,rgb(255,255,0));	

	mbuttonlist[6].id = SWITCH_BUTTON;
	mbuttonlist[6].x0 = 134;
	mbuttonlist[6].y0 = 155;
	mbuttonlist[6].wide =95;
	mbuttonlist[6].high = 25;
	mbuttonlist[6].text_x = 24;
	mbuttonlist[6].text_y = 20;
	mbuttonlist[6].textcolor = rgb(255,255,0);
	mbuttonlist[6].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[6].text,"<<<===");
	drawbutton(&mbuttonlist[6]);
	
	//顯示速度及角度
	sprintf(buf,"%d",gfreq);
	fillrectangle(120,124,130,140,rgb(0,0,255));	
	drawascii168(120,138,buf,rgb(255,255,0));
	
	sprintf(buf,"%d",5-gAngle);
	fillrectangle(120,84,130,100,rgb(0,0,255));	
	drawascii168(120,98,buf,rgb(255,255,0)); 
	
	//配置與電機有關的接口
	Motor_Entry();
	

}

void uart_win(void)
{
//	if(flushenable)
	GUI_cls();
	
	drawexitbutton();
	buttonnumber = 1;	
	drawtext(120,200,"串口演示窗口",1,3,rgb(255,255,0));
	drawtext(70,150,"請用串口線將主機和目標板相連",1,0,rgb(255,255,0));
	drawtext(40,130,"并用超級終端查看",1,0,rgb(255,255,0));
	drawascii168(170,128,"(115200-8-N-1)",rgb(255,255,0));
	mbuttonlist[0].id = START_BUTTON;
	mbuttonlist[0].x0 = 110;
	mbuttonlist[0].y0 = 50;
	mbuttonlist[0].wide =80;
	mbuttonlist[0].high = 30;
	mbuttonlist[0].text_x = 18;
	mbuttonlist[0].text_y = 20;
	mbuttonlist[0].textcolor = rgb(255,255,0);
	mbuttonlist[0].bgcolor = rgb(255,0,255);
	strcopy(mbuttonlist[0].text,"Start");
	drawbutton(&mbuttonlist[0]);
	
}	

void usb_win(void)
{
//	if(flushenable)
	GUI_cls();
	
	drawexitbutton();
	buttonnumber = 0;
	drawascii168(110,198,"USB",	rgb(255,255,0));;
	drawtext(138,200,"演示窗口",1,3,rgb(255,255,0));

	drawascii168(70,128,"USB",rgb(255,255,0));
	drawtext(97,130,"已經配置完成，請將",1,0,rgb(255,255,0));
	drawascii168(70,128,",",rgb(255,255,0));
	
	
	drawtext(70,110,"主機和目標板相連并查看！",1,0,rgb(255,255,0));
	
}	

void KBD_win(void)
{
	int i;
	GUI_cls();
	
	drawexitbutton();
	buttonnumber = 0;
	drawtext(65,200,"鍵盤及數碼管演示窗口",1,3,rgb(255,255,0));
	drawtext(70,150,"鍵盤及數碼管已經配置好，",1,0,rgb(255,255,0));
	drawtext(70,130,"請按鍵盤進行測試！",1,0,rgb(255,255,0));
	
	KBD_Entry();

		


}

void GPRS_win(void)
{
	GUI_cls();
	
	drawexitbutton();
	drawascii168(120,200,"GPRS",rgb(255,255,0));
12 下一頁
?? 文件大小 155 K
?? 上傳用戶 jhjfjh22544
?? 所屬分類微處理器開發
??? 相關標簽

#S3C2410 #GPRS #ADS #1.2
?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

?? gui.c

?? 快捷鍵說明
