#ifndef _X5045_
#define _X5045_

#include "P8XC5X2.h"

sbit SO=P3^0;
sbit SI=P3^1;
sbit SCK=P3^3;
sbit CS=P3^5;

//5045可編程看門狗監控EEPROM指令集
#define WREN 0x06; 00000110 //設置寫使能鎖存器（允許寫操作)
#define WRDI 0x04; 00000100 //復位寫使能鎖存器（禁止寫操作）
#define RDSR 0x05; 00000101 //讀狀態寄存器
#define WRSR 0x01; 00000001 //寫狀態寄存器（塊鎖定）
#define READ 0x03; 00000011 //從開始于所選地址的存儲器列陣中讀出數據
#define WRTE 0x02; 00000010 //把數據寫入開始于所選地址的存儲器陣列中（1至4字節）
void wren_dog(void);
void in_byte(unsigned char BYT);
unsigned char out_byte(void);
unsigned char rdsr_dog(void);
void wrsr_dog(unsigned char status_reg);
unsigned char wip_poll(void);
void wrdi_dog(void);
void rest_dog(void);
unsigned char byte_read(unsigned char H,unsigned char L);
void byte_write(unsigned char H,unsigned char L,unsigned char D);
#endif