/*
	FreeRTOS V3.2.0 - Copyright (C) 2003 - 2005 Richard Barry.

	This file is part of the FreeRTOS distribution.

	FreeRTOS is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	FreeRTOS is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with FreeRTOS; if not, write to the Free Software
	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

	A special exception to the GPL can be applied should you wish to distribute
	a combined work that includes FreeRTOS, without being obliged to provide
	the source code for any proprietary components.  See the licensing section 
	of http://www.FreeRTOS.org for full details of how and when the exception
	can be applied.

	***************************************************************************
	See http://www.FreeRTOS.org for documentation, latest information, license 
	and contact details.  Please ensure to read the configuration and relevant 
	port sections of the online documentation.
	***************************************************************************
*/

/* 
Changes from V3.0.0
	+ ISRcode is pulled inline and portTICKisr() is therefore
	  deleted from this file.

	+ Prescaler logic for Timer1 added to allow for a wider
	  range of TickRates.

Changes from V3.0.1
*/

#include <FreeRTOS.h>
#include <task.h>

/* IO port constants. */
#define portBIT_SET		(1)
#define portBIT_CLEAR	(0)

/* 
 * Hardware setup for the tick.
 * We use a compare match on timer1. Depending on MPU-frequency
 * and requested tickrate, a prescaled value with a matching
 * prescaler are determined.
 */
#define	portTIMER_COMPARE_BASE			((APROCFREQ/4)/configTICK_RATE_HZ)

#if portTIMER_COMPARE_BASE   < 0x10000
	#define	portTIMER_COMPARE_VALUE		(portTIMER_COMPARE_BASE)
	#define portTIMER_COMPARE_PS1		(portBIT_CLEAR)
	#define portTIMER_COMPARE_PS0		(portBIT_CLEAR)
#elif portTIMER_COMPARE_BASE < 0x20000
	#define	portTIMER_COMPARE_VALUE		(portTIMER_COMPARE_BASE / 2)
	#define portTIMER_COMPARE_PS1		(portBIT_CLEAR)
	#define portTIMER_COMPARE_PS0		(portBIT_SET)
#elif portTIMER_COMPARE_BASE < 0x40000
	#define	portTIMER_COMPARE_VALUE		(portTIMER_COMPARE_BASE / 4)
	#define portTIMER_COMPARE_PS1		(portBIT_SET)
	#define portTIMER_COMPARE_PS0		(portBIT_CLEAR)
#elif portTIMER_COMPARE_BASE < 0x80000
	#define	portTIMER_COMPARE_VALUE		(portTIMER_COMPARE_BASE / 8)
	#define portTIMER_COMPARE_PS1		(portBIT_SET)
	#define portTIMER_COMPARE_PS0		(portBIT_SET)
#else
	#error "TickRate out of range"
#endif

/*-----------------------------------------------------------*/

/*
 * Setup a timer for a regular tick.
 */
void portSetupTick( void )
{
	/*
	 * Interrupts are disabled when this function is called.
	 */

	/*
	 * Setup CCP1
	 * Provide the tick interrupt using a compare match on timer1.
	 */

	/*
	 * Set the compare match value.
	 */
	CCPR1H = ( unsigned portCHAR ) ( ( portTIMER_COMPARE_VALUE >> 8 ) & 0xff );
	CCPR1L = ( unsigned portCHAR )   ( portTIMER_COMPARE_VALUE & 0xff );

	/*
	 * Set Compare Special Event Trigger Mode
	 */
	bCCP1M3 	= portBIT_SET;
	bCCP1M2 	= portBIT_CLEAR;
	bCCP1M1 	= portBIT_SET;
	bCCP1M0		= portBIT_SET;

	/*
	 * Enable CCP1 interrupt
	 */
	bCCP1IE 	= portBIT_SET;

	/*
	 * We are only going to use the global interrupt bit, so disable
	 * interruptpriorities and enable peripheral interrupts.
	 */
	bIPEN		= portBIT_CLEAR;
	bPEIE		= portBIT_SET;

	/*
	 * Set up timer1
	 * It will produce the system tick.
	 */

	/*
	 * Clear the time count
	 */
	TMR1H = ( unsigned portCHAR ) 0x00;
	TMR1L = ( unsigned portCHAR ) 0x00;

	/*
	 * Setup the timer
	 */
	bRD16		= portBIT_SET;				// 16-bit
	bT1CKPS1	= portTIMER_COMPARE_PS1;	// prescaler
	bT1CKPS0	= portTIMER_COMPARE_PS0;	// prescaler
	bT1OSCEN	= portBIT_SET;				// Oscillator enable
	bT1SYNC		= portBIT_SET;				// No external clock sync
	bTMR1CS		= portBIT_CLEAR;			// Internal clock
	
	bTMR1ON		= portBIT_SET;				// Start timer1
}