#ifndef	__LCD_USER_h__
#define	__LCD_USER_h__

//	write your header here
#define Clear_Watchdog()	*(unsigned *)0x7012=1;		// 清看門狗
//LCD供電電平選擇
#define		M_LCD_VDD_SET	M_LCD_SETR_5		//3.3V供電時選此二項
#define		M_LCD_VDD		M_LCD_BIAS_9		//....
//#define		M_LCD_VDD_SET	M_LCD_SETR_4	//5.0V供電時選此二項
//#define		M_LCD_VDD		M_LCD_BIAS_9	//...


//LCD開關命令
#define		M_LCD_ON		0x00af
#define		M_LCD_OFF		0x00ae
//設置上電控制模式
#define		M_LCD_POWER_BC	0x002c
#define		M_LCD_POWER_VR	0x002a
#define		M_LCD_POWER_VC	0x0029
#define		M_LCD_POWER_ALL	0x002f
//V5內部電壓調節電阻設置……
#define		M_LCD_SETR_0	0x0020
#define		M_LCD_SETR_1	0x0021
#define		M_LCD_SETR_2	0x0022
#define		M_LCD_SETR_3	0x0023
#define		M_LCD_SETR_4	0x0024
#define		M_LCD_SETR_5	0x0025
#define		M_LCD_SETR_6	0x0026
#define		M_LCD_SETR_7	0x0027
//...end
#define		M_LCD_ELE_VOL	0x0081		//電量設置模式（顯示亮度）
//偏壓設置
#define		M_LCD_BIAS_9	0x00a2		//V5時選此選項設置
#define		M_LCD_BIAS_7	0x00a1		//V3時選此選項設置
//Com 掃描方式設置命令
#define		M_LCD_COM_NOR	0x00c0		//正常方式
#define		M_LCD_COM_REV	0x00c8		//反相
//Segment方向選擇
#define		M_LCD_SEG_NOR	0x00a0		//正常
#define		M_LCD_SEG_REV	0x00a1		//反向
//全屏點亮/變暗指令
#define		M_LCD_ALL_LIGNT	0x00a5		//LCD ALL paint ON
#define		M_LCD_ALL_LOW	0x00a4		//Normal Display mode
//正相反相顯示控制指令，RAM中數據不變
#define		M_LCD_ALL_NOR	0x00a6		//正相
#define		M_LCD_ALL_REV	0x00a7		//反相
//靜態指示器控制指令
#define		M_LCD_STATIC_ON	0x00ad		//ON
#define		M_LCD_STATIC_OFF 0x00ac		//OFF
//設置顯示起始行對應RAM行號
#define		M_LCD_BEGIN_LINE 0x0040		//基數，后面可加的尾數可為0~63
//設置當前頁基數
#define		M_LCD_COL_PAGE	0x00b0		//基數指令，后可加尾數0~8
//設置當前列基數
#define		M_LCD_COL_LINE_LOW	0x0004		//基數指令，低四位有效
#define		M_LCD_COL_LINE_HIG	0x0010		//基數指令，低四位有效
//========================================================================//
//API接口函數宏定義
//========================================================================//
/////-----       屏幕尺寸	    -----/////
#define SCR_MAX_COL		128	
#define SCR_MAX_ROW		64						
//#define TEXT_MAX_COL	20
//#define TEXT_MAX_ROW	4

/////-----       電源模式	    -----/////
#define PWR_ON			0x0001					
#define	PWR_OFF			0x0000
#define PWR_SLEEP		0x0002
#define PWR_STDBY		0x0003

/////-----       圖形顯示模式	    -----/////
#define PAINT_COVER		0
#define PAINT_SET		1
#define PAINT_CLR		2
#define PAINT_REV		3
#define PAINT_RECO		4

#define PAINT_HOLLOW	0
#define PAINT_SOLID		1	
void LCD501_Init(unsigned int InitialData);
void LCD501_Power(unsigned ModeCode);
void LCD501_SetContrast(unsigned Contrast);
unsigned LCD501_GetContrast(void);
void LCD501_ScrollUp(unsigned Rows);
unsigned LCD501_GetScroll(void);
void LCD501_ReverseColor(void);
void LCD501_ClrScreen(unsigned int Mode);
void LCD501_SetPaintMode(unsigned ModeCode);
unsigned int LCD501_GetPaintMode(void);
void LCD501_PutPixel(unsigned int x,unsigned int y);
void LCD501_Line(unsigned int x,unsigned int y,unsigned int e_x,unsigned int e_y);
void LCD501_Circle(unsigned int x,unsigned int y,unsigned int r,unsigned int Mode);
void LCD501_Rectangle(unsigned left, unsigned top, unsigned right, unsigned bottom, unsigned Mode);
void LCD501_Bitmap(unsigned int x,unsigned int y,unsigned int *word);
void LCD501_FontSet(unsigned int Font);
unsigned int LCD501_FontGet(void);
void LCD501_PutChar(int x,int y,unsigned int a);
void LCD501_PutString(int x,int y,unsigned int * string);

#endif