MPLS-LDP-GENERIC-STD-MIB DEFINITIONS ::= BEGINIMPORTS    OBJECT-TYPE,    MODULE-IDENTITY,    Unsigned32        FROM SNMPv2-SMI                                  -- [RFC2578]    MODULE-COMPLIANCE,    OBJECT-GROUP        FROM SNMPv2-CONF                                 -- [RFC2580]    RowStatus,    StorageType        FROM SNMPv2-TC                                   -- [RFC2579]    InterfaceIndexOrZero        FROM IF-MIB                                      -- [RFC2020]    mplsStdMIB        FROM MPLS-TC-STD-MIB                             -- [RFC3811]    mplsLdpEntityLdpId,    mplsLdpEntityIndex        FROM MPLS-LDP-STD-MIB                            -- [RFC3813]    ;mplsLdpGenericStdMIB MODULE-IDENTITY    LAST-UPDATED "200406030000Z"  -- June 6, 2004    ORGANIZATION "Multiprotocol Label Switching (mpls)                  Working Group"    CONTACT-INFO        "Joan Cucchiara (jcucchiara@mindspring.com)         Marconi Communications, Inc.         Hans Sjostrand (hans@ipunplugged.com)         ipUnplugged         James V. Luciani (james_luciani@mindspring.com)         Marconi Communications, Inc.         Working Group Chairs:         George Swallow,   email: swallow@cisco.com         Loa Andersson,    email: loa@pi.se         MPLS Working Group, email: mpls@uu.net    "    DESCRIPTION        "Copyright (C) The Internet Society (year). The        initial version of this MIB module was published        in RFC 3815. For full legal notices see the RFC        itself or see:        http://www.ietf.org/copyrights/ianamib.html        This MIB contains managed object definitions for        configuring and monitoring the Multiprotocol Label        Switching (MPLS), Label Distribution Protocol (LDP),        utilizing ethernet as the Layer 2 media."    REVISION "200406030000Z"  -- June 6, 2004    DESCRIPTION        "Initial version published as part of RFC 3815."    ::= { mplsStdMIB 7 }--****************************************************************mplsLdpGenericObjects         OBJECT IDENTIFIER ::= { mplsLdpGenericStdMIB 1 }mplsLdpGenericConformance         OBJECT IDENTIFIER ::= { mplsLdpGenericStdMIB 2 }--****************************************************************-- MPLS LDP GENERIC Objects--****************************************************************---- Ldp Entity Objects for Generic Labels--mplsLdpEntityGenericObjects  OBJECT IDENTIFIER ::=                              { mplsLdpGenericObjects 1 }---- The MPLS LDP Entity Generic Label Range Table--mplsLdpEntityGenericLRTable OBJECT-TYPE    SYNTAX SEQUENCE OF MplsLdpEntityGenericLREntry    MAX-ACCESS not-accessible    STATUS current    DESCRIPTION        "The MPLS LDP Entity Generic Label Range (LR)        Table.        The purpose of this table is to provide a mechanism        for configurating a contiguous range of generic labels,        or a 'label range' for LDP Entities.        LDP Entities which use Generic Labels must have at least        one entry in this table.  In other words, this table        'extends' the mpldLdpEntityTable for Generic Labels."    ::= { mplsLdpEntityGenericObjects 1 }mplsLdpEntityGenericLREntry OBJECT-TYPE    SYNTAX MplsLdpEntityGenericLREntry    MAX-ACCESS not-accessible    STATUS current    DESCRIPTION        "A row in the LDP Entity Generic Label        Range (LR) Table.  One entry in this table contains        information on a single range of labels        represented by the configured Upper and Lower        Bounds pairs.  NOTE: there is NO corresponding        LDP message which relates to the information        in this table, however, this table does provide        a way for a user to 'reserve' a generic label        range.        NOTE:  The ranges for a specific LDP Entity        are UNIQUE and non-overlapping.        A row will not be created unless a unique and        non-overlapping range is specified."    INDEX       {  mplsLdpEntityLdpId,                   mplsLdpEntityIndex,                   mplsLdpEntityGenericLRMin,                   mplsLdpEntityGenericLRMax                }    ::= { mplsLdpEntityGenericLRTable 1 }MplsLdpEntityGenericLREntry ::= SEQUENCE {    mplsLdpEntityGenericLRMin           Unsigned32,    mplsLdpEntityGenericLRMax           Unsigned32,    mplsLdpEntityGenericLabelSpace      INTEGER,    mplsLdpEntityGenericIfIndexOrZero   InterfaceIndexOrZero,    mplsLdpEntityGenericLRStorageType   StorageType,    mplsLdpEntityGenericLRRowStatus     RowStatus}mplsLdpEntityGenericLRMin OBJECT-TYPE    SYNTAX     Unsigned32(0..1048575)    MAX-ACCESS not-accessible    STATUS     current    DESCRIPTION        "The minimum label configured for this range."    ::= { mplsLdpEntityGenericLREntry 1 }mplsLdpEntityGenericLRMax OBJECT-TYPE    SYNTAX     Unsigned32(0..1048575)    MAX-ACCESS not-accessible    STATUS     current    DESCRIPTION        "The maximum label configured for this range."    ::= { mplsLdpEntityGenericLREntry 2 }mplsLdpEntityGenericLabelSpace  OBJECT-TYPE    SYNTAX      INTEGER {                          perPlatform(1),                          perInterface(2)                         }    MAX-ACCESS  read-create    STATUS      current    DESCRIPTION       "This value of this object is perPlatform(1), then       this means that the label space type is       per platform.       If this object is perInterface(2), then this       means that the label space type is per Interface."    REFERENCE        "RFC3036, LDP Specification, Section 2.2.1,        Label Spaces."    DEFVAL { perPlatform }    ::= { mplsLdpEntityGenericLREntry 3 }mplsLdpEntityGenericIfIndexOrZero OBJECT-TYPE    SYNTAX      InterfaceIndexOrZero    MAX-ACCESS  read-create    STATUS      current    DESCRIPTION       "This value represents either the InterfaceIndex of       the 'ifLayer' where these Generic Label would be created,       or 0 (zero).  The value of zero means that the       InterfaceIndex is not known.       However, if the InterfaceIndex is known,       then it must be represented by this value.       If an InterfaceIndex becomes known, then the       network management entity (e.g., SNMP agent) responsible       for this object MUST change the value from 0 (zero) to the       value of the InterfaceIndex."    ::= { mplsLdpEntityGenericLREntry 4 }mplsLdpEntityGenericLRStorageType  OBJECT-TYPE    SYNTAX      StorageType    MAX-ACCESS  read-create    STATUS      current    DESCRIPTION        "The storage type for this conceptual row.        Conceptual rows having the value 'permanent(4)'        need not allow write-access to any columnar        objects in the row."    DEFVAL { nonVolatile }    ::= { mplsLdpEntityGenericLREntry 5 }mplsLdpEntityGenericLRRowStatus OBJECT-TYPE    SYNTAX RowStatus    MAX-ACCESS read-create    STATUS current    DESCRIPTION        "The status of this conceptual row.  All writable         objects in this row may be modified at any time,         however, as described in  detail in the section         entitled, 'Changing Values After Session         Establishment', and again described in the         DESCRIPTION clause of the mplsLdpEntityAdminStatus object,         if a session has been initiated with a Peer,         changing objects in this table will         wreak havoc with the session and interrupt traffic.         To repeat again:  the recommended procedure is         to set the mplsLdpEntityAdminStatus to         down, thereby explicitly causing a         session to be torn down. Then, change objects         in this entry, then set the mplsLdpEntityAdminStatus         to enable which enables a new session to be initiated.         There must exist at least one entry in this         table for every LDP Entity that has a         generic label configured."    ::= { mplsLdpEntityGenericLREntry 6 }--****************************************************************-- Module Conformance Statement--****************************************************************mplsLdpGenericGroups    OBJECT IDENTIFIER ::= { mplsLdpGenericConformance 1 }mplsLdpGenericCompliances    OBJECT IDENTIFIER ::= { mplsLdpGenericConformance 2 }---- Full Compliance--mplsLdpGenericModuleFullCompliance MODULE-COMPLIANCE    STATUS current    DESCRIPTION        "The Module is implemented with support for        read-create and read-write.  In other words,        both monitoring and configuration        are available when using this MODULE-COMPLIANCE."    MODULE -- this module        MANDATORY-GROUPS    {                               mplsLdpGenericGroup                            }    OBJECT       mplsLdpEntityGenericLRRowStatus    SYNTAX       RowStatus { active(1) }    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }    DESCRIPTION       "Support for createAndWait and notInService is not required."    ::= { mplsLdpGenericCompliances 1 }---- Read-Only Compliance--mplsLdpGenericModuleReadOnlyCompliance MODULE-COMPLIANCE    STATUS current    DESCRIPTION        "The Module is implemented with support for        read-only.  In other words, only monitoring        is available by implementing this MODULE-COMPLIANCE."    MODULE -- this module        MANDATORY-GROUPS    {                               mplsLdpGenericGroup                            }    OBJECT       mplsLdpEntityGenericLabelSpace    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityGenericIfIndexOrZero    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityGenericLRStorageType    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityGenericLRRowStatus    SYNTAX       RowStatus { active(1) }    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required, and active is the       only status that needs to be supported."    ::= { mplsLdpGenericCompliances 2 }---- units of conformance--mplsLdpGenericGroup OBJECT-GROUP    OBJECTS {    mplsLdpEntityGenericLabelSpace,    mplsLdpEntityGenericIfIndexOrZero,    mplsLdpEntityGenericLRStorageType,    mplsLdpEntityGenericLRRowStatus    }    STATUS    current    DESCRIPTION        "Objects that apply to all MPLS LDP implementations        using Generic Labels as the Layer 2."    ::= { mplsLdpGenericGroups 1 }END