This is intended to supplement ifOperStatus.  Note that there     is a 1-1 relationship between the status bits defined in this     object and the notification thresholds defined elsewhere in     this MIB."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 3 }hdsl2ShdslEndpointES OBJECT-TYPE   SYNTAX      Counter32   UNITS       "seconds"   MAX-ACCESS  read-only   STATUS      current   DESCRIPTION     "Count of Errored Seconds (ES) on this endpoint since the xU      was last restarted."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 4 }hdsl2ShdslEndpointSES OBJECT-TYPE   SYNTAX       Counter32   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Severely Errored Seconds (SES) on this endpoint      since the xU was last restarted."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 5 }hdsl2ShdslEndpointCRCanomalies OBJECT-TYPE   SYNTAX       Counter32   UNITS        "detected CRC Anomalies"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of CRC anomalies on this endpoint since the xU was      last restarted."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 6 }hdsl2ShdslEndpointLOSWS OBJECT-TYPE   SYNTAX       Counter32   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Loss of Sync Word (LOSW) Seconds on this endpoint      since the xU was last restarted."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 7 }hdsl2ShdslEndpointUAS OBJECT-TYPE   SYNTAX       Counter32   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Unavailable Seconds (UAS) on this endpoint since      the xU was last restarted."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 8 }hdsl2ShdslEndpointCurr15MinTimeElapsed OBJECT-TYPE   SYNTAX       Hdsl2ShdslPerfTimeElapsed   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Total elapsed seconds in the current 15-minute interval."   ::= { hdsl2ShdslEndpointCurrEntry 9 }hdsl2ShdslEndpointCurr15MinES OBJECT-TYPE   SYNTAX       PerfCurrentCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Errored Seconds (ES) in the current 15-minute      interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 10 }hdsl2ShdslEndpointCurr15MinSES OBJECT-TYPE   SYNTAX       PerfCurrentCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Severely Errored Seconds (SES) in the current      15-minute interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 11 }hdsl2ShdslEndpointCurr15MinCRCanomalies OBJECT-TYPE   SYNTAX       PerfCurrentCount   UNITS        "detected CRC Anomalies"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of CRC anomalies in the current 15-minute interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 12 }hdsl2ShdslEndpointCurr15MinLOSWS OBJECT-TYPE   SYNTAX       PerfCurrentCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Loss of Sync Word (LOSW) Seconds in the current      15-minute interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 13 }hdsl2ShdslEndpointCurr15MinUAS OBJECT-TYPE   SYNTAX       PerfCurrentCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Unavailable Seconds (UAS) in the current 15-minute      interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 14 }hdsl2ShdslEndpointCurr1DayTimeElapsed OBJECT-TYPE   SYNTAX       Hdsl2ShdslPerfTimeElapsed   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Number of seconds that have elapsed since the beginning of      the current 1-day interval."   ::= { hdsl2ShdslEndpointCurrEntry 15 }hdsl2ShdslEndpointCurr1DayES OBJECT-TYPE   SYNTAX       Hdsl2ShdslPerfCurrDayCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Errored Seconds (ES) during the current day as      measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 16 }hdsl2ShdslEndpointCurr1DaySES OBJECT-TYPE   SYNTAX       Hdsl2ShdslPerfCurrDayCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Severely Errored Seconds (SES) during the current      day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 17 }hdsl2ShdslEndpointCurr1DayCRCanomalies OBJECT-TYPE   SYNTAX       Hdsl2ShdslPerfCurrDayCount   UNITS        "detected CRC Anomalies"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of CRC anomalies during the current day as measured      by hdsl2ShdslEndpointCurr1DayTimeElapsed."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 18 }hdsl2ShdslEndpointCurr1DayLOSWS OBJECT-TYPE   SYNTAX       Hdsl2ShdslPerfCurrDayCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Loss of Sync Word (LOSW) Seconds during the current      day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 19 }hdsl2ShdslEndpointCurr1DayUAS OBJECT-TYPE   SYNTAX       Hdsl2ShdslPerfCurrDayCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Unavailable Seconds (UAS) during the current day as      measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2ShdslEndpointCurrEntry 20 }-- Segment Endpoint 15-Minute Interval Status/Performance Group--hdsl2Shdsl15MinIntervalTable OBJECT-TYPE   SYNTAX      SEQUENCE OF Hdsl2Shdsl15MinIntervalEntry   MAX-ACCESS  not-accessible   STATUS      current   DESCRIPTION     "This table provides one row for each HDSL2/SHDSL endpoint      performance data collection interval.  This table contains      live data from equipment.  As such, it is NOT persistent."   ::= { hdsl2ShdslMibObjects 6 }hdsl2Shdsl15MinIntervalEntry OBJECT-TYPE   SYNTAX      Hdsl2Shdsl15MinIntervalEntry   MAX-ACCESS  not-accessible   STATUS      current   DESCRIPTION     "An entry in the hdsl2Shdsl15MinIntervalTable."   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,           hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber}   ::= { hdsl2Shdsl15MinIntervalTable 1 }Hdsl2Shdsl15MinIntervalEntry ::=   SEQUENCE   {   hdsl2Shdsl15MinIntervalNumber         Unsigned32,   hdsl2Shdsl15MinIntervalES             PerfIntervalCount,   hdsl2Shdsl15MinIntervalSES            PerfIntervalCount,   hdsl2Shdsl15MinIntervalCRCanomalies   PerfIntervalCount,   hdsl2Shdsl15MinIntervalLOSWS          PerfIntervalCount,   hdsl2Shdsl15MinIntervalUAS            PerfIntervalCount   }hdsl2Shdsl15MinIntervalNumber OBJECT-TYPE   SYNTAX      Unsigned32(1..96)   MAX-ACCESS  not-accessible   STATUS      current   DESCRIPTION     "Performance Data Interval number. 1 is the the most recent      previous interval; interval 96 is 24 hours ago. Intervals      2..96 are optional."   ::= { hdsl2Shdsl15MinIntervalEntry 1 }hdsl2Shdsl15MinIntervalES OBJECT-TYPE   SYNTAX      PerfIntervalCount   UNITS       "seconds"   MAX-ACCESS  read-only   STATUS      current   DESCRIPTION     "Count of Errored Seconds (ES) during the interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2Shdsl15MinIntervalEntry 2 }hdsl2Shdsl15MinIntervalSES OBJECT-TYPE   SYNTAX      PerfIntervalCount   UNITS       "seconds"   MAX-ACCESS  read-only   STATUS      current   DESCRIPTION     "Count of Severely Errored Seconds (SES) during the interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2Shdsl15MinIntervalEntry 3 }hdsl2Shdsl15MinIntervalCRCanomalies OBJECT-TYPE   SYNTAX      PerfIntervalCount   UNITS       "detected CRC Anomalies"   MAX-ACCESS  read-only   STATUS      current   DESCRIPTION     "Count of CRC anomalies during the interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2Shdsl15MinIntervalEntry 4 }hdsl2Shdsl15MinIntervalLOSWS OBJECT-TYPE   SYNTAX      PerfIntervalCount   UNITS       "seconds"   MAX-ACCESS  read-only   STATUS      current   DESCRIPTION     "Count of Loss of Sync Word (LOSW) Seconds during the      interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2Shdsl15MinIntervalEntry 5 }hdsl2Shdsl15MinIntervalUAS OBJECT-TYPE   SYNTAX      PerfIntervalCount   UNITS       "seconds"   MAX-ACCESS  read-only   STATUS      current   DESCRIPTION     "Count of Unavailable Seconds (UAS) during the interval."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2Shdsl15MinIntervalEntry 6 }-- Segment Endpoint 1-Day Interval Status/Performance Group--hdsl2Shdsl1DayIntervalTable OBJECT-TYPE   SYNTAX      SEQUENCE OF Hdsl2Shdsl1DayIntervalEntry   MAX-ACCESS  not-accessible   STATUS      current   DESCRIPTION     "This table provides one row for each HDSL2/SHDSL endpoint      performance data collection interval.  This table contains      live data from equipment.  As such, it is NOT persistent."   ::= { hdsl2ShdslMibObjects 7 }hdsl2Shdsl1DayIntervalEntry OBJECT-TYPE   SYNTAX      Hdsl2Shdsl1DayIntervalEntry   MAX-ACCESS  not-accessible   STATUS      current   DESCRIPTION     "An entry in the hdsl2Shdsl1DayIntervalTable."   INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,           hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber }   ::= { hdsl2Shdsl1DayIntervalTable 1 }Hdsl2Shdsl1DayIntervalEntry ::=   SEQUENCE   {   hdsl2Shdsl1DayIntervalNumber         Unsigned32,   hdsl2Shdsl1DayIntervalMoniSecs       Hdsl2ShdslPerfTimeElapsed,   hdsl2Shdsl1DayIntervalES             Hdsl2Shdsl1DayIntervalCount,   hdsl2Shdsl1DayIntervalSES            Hdsl2Shdsl1DayIntervalCount,   hdsl2Shdsl1DayIntervalCRCanomalies   Hdsl2Shdsl1DayIntervalCount,   hdsl2Shdsl1DayIntervalLOSWS          Hdsl2Shdsl1DayIntervalCount,   hdsl2Shdsl1DayIntervalUAS            Hdsl2Shdsl1DayIntervalCount   }hdsl2Shdsl1DayIntervalNumber OBJECT-TYPE   SYNTAX      Unsigned32(1..30)   MAX-ACCESS  not-accessible   STATUS      current   DESCRIPTION     "History Data Interval number. Interval 1 is the the most      recent previous day; interval 30 is 30 days ago. Intervals      2..30 are optional."   ::= { hdsl2Shdsl1DayIntervalEntry 1 }hdsl2Shdsl1DayIntervalMoniSecs OBJECT-TYPE   SYNTAX       Hdsl2ShdslPerfTimeElapsed   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "The amount of time in the 1-day interval over which the      performance monitoring information is actually counted.      This value will be the same as the interval duration except      in a situation where performance monitoring data could not      be collected for any reason."   ::= { hdsl2Shdsl1DayIntervalEntry 2 }hdsl2Shdsl1DayIntervalES OBJECT-TYPE   SYNTAX       Hdsl2Shdsl1DayIntervalCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Errored Seconds (ES) during the 1-day interval as      measured by hdsl2Shdsl1DayIntervalMoniSecs."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2Shdsl1DayIntervalEntry 3 }hdsl2Shdsl1DayIntervalSES OBJECT-TYPE   SYNTAX       Hdsl2Shdsl1DayIntervalCount   UNITS        "seconds"   MAX-ACCESS   read-only   STATUS       current   DESCRIPTION     "Count of Severely Errored Seconds (SES) during the 1-day      interval as measured by hdsl2Shdsl1DayIntervalMoniSecs."   REFERENCE   "HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7"   ::= { hdsl2Shdsl1DayIntervalEntry 4 }hdsl2Shdsl1DayIntervalCRCanomalies OBJECT-TYPE   SYNTAX       Hdsl2Shdsl1DayIntervalCount   UNITS        "detected CRC Anomalies"