TOKENRING-STATION-SR-MIB DEFINITIONS ::= BEGINIMPORTS    MODULE-IDENTITY, OBJECT-TYPE                                         FROM SNMPv2-SMI    TEXTUAL-CONVENTION, RowStatus, MacAddress                                         FROM SNMPv2-TC    MODULE-COMPLIANCE, OBJECT-GROUP      FROM SNMPv2-CONF    mib-2, ifIndex                       FROM RFC1213-MIB;dot5SrMIB MODULE-IDENTITY    LAST-UPDATED "9412161000Z"    ORGANIZATION "IETF Interfaces MIB Working Group"    CONTACT-INFO            "       Keith McCloghrie            Postal: Cisco Systems, Inc.                    170 West Tasman Drive                    San Jose, CA  95134-1706                    US             Phone: +1 408 526 5260             Email: kzm@cisco.com"    DESCRIPTION            "The MIB module for managing source routes in            end-stations on IEEE 802.5 Token Ring networks."    ::= { mib-2 42 }dot5SrMIBObjects OBJECT IDENTIFIER ::= { dot5SrMIB 1 }SourceRoute ::= TEXTUAL-CONVENTION    DISPLAY-HINT "1x:"    STATUS       current    DESCRIPTION                 "Represents a Source Route, containing an                 embedded sequence of bridge and ring ID's,                 as used by 802.5 Source Routing."    REFERENCE    "Annex C of ISO/IEC 10038: 1993,                 [ANSI/IEEE Std 802.1D, 1993]"    SYNTAX       OCTET STRING (SIZE(0..30))--           The 802.5 Station Source Route Table--dot5SrRouteTable   OBJECT-TYPE    SYNTAX      SEQUENCE OF Dot5SrRouteEntry    MAX-ACCESS  not-accessible    STATUS      current    DESCRIPTION               "The table of source-routing routes.               This represents the 802.5 RIF database."    ::= { dot5SrMIBObjects 1 }dot5SrRouteEntry  OBJECT-TYPE    SYNTAX      Dot5SrRouteEntry    MAX-ACCESS  not-accessible    STATUS      current    DESCRIPTION                "Information on a specific route.                An entry is created whenever a 'Single Path                Explorer' or an 'All Paths Explorer' discovers                a route to a neighbor not currently in the table,                or whenever an 'All Paths Explorer' discovers a                better (e.g., shorter) route than the route currently                stored in the table.  This is done on behalf of                any network layer client.                The ifIndex value in the INDEX clause refers to                the value of MIB-II's ifIndex object for the                interface on which the route is in effect."    INDEX  { ifIndex, dot5SrRouteDestination }    ::= { dot5SrRouteTable 1 }Dot5SrRouteEntry ::= SEQUENCE {    dot5SrRouteDestination   MacAddress,    dot5SrRouteControl       OCTET STRING,    dot5SrRouteDescr         SourceRoute,    dot5SrRouteStatus        RowStatus}dot5SrRouteDestination  OBJECT-TYPE    SYNTAX      MacAddress    MAX-ACCESS  not-accessible    STATUS      current    DESCRIPTION               "The destination of this route."    ::= { dot5SrRouteEntry 2 }dot5SrRouteControl  OBJECT-TYPE    SYNTAX      OCTET STRING (SIZE(2))    MAX-ACCESS  read-create    STATUS      current    DESCRIPTION               "The value of Routing Control field for this               route."    REFERENCE  "Annex C of ISO/IEC 10038: 1993,               [ANSI/IEEE Std 802.1D, 1993]"    ::= { dot5SrRouteEntry 3 }dot5SrRouteDescr  OBJECT-TYPE    SYNTAX      SourceRoute    MAX-ACCESS  read-create    STATUS      current    DESCRIPTION               "The embedded sequence of bridge and ring ID's               for this route.  For destinations on the               local ring, the value of this object is               the zero-length string."    REFERENCE  "Annex C of ISO/IEC 10038: 1993,               [ANSI/IEEE Std 802.1D, 1993]"    ::= { dot5SrRouteEntry 4 }dot5SrRouteStatus  OBJECT-TYPE    SYNTAX      RowStatus    MAX-ACCESS  read-create    STATUS      current    DESCRIPTION             "The status of this row.  Values of the instances             of dot5SrRouteControl and dot5SrRouteDescr can be             modified while the row's status is 'active."    ::= { dot5SrRouteEntry 5 }-- conformance informationdot5SrConformance OBJECT IDENTIFIER ::= { dot5SrMIB 2 }dot5SrGroups      OBJECT IDENTIFIER ::= { dot5SrConformance 1 }dot5SrCompliances OBJECT IDENTIFIER ::= { dot5SrConformance 2 }-- compliance statementsdot5SrCompliance MODULE-COMPLIANCE    STATUS  current    DESCRIPTION        "The compliance statement for SNMPv2 entities        which implement the IEEE 802.5 Station Source Route        MIB."    MODULE  -- this module        MANDATORY-GROUPS { dot5SrRouteGroup }        OBJECT      dot5SrRouteStatus        SYNTAX      INTEGER { active(1) }   -- subset of values        MIN-ACCESS  read-only        DESCRIPTION            "Write access is not required, and only the 'active'            value need be supported."        OBJECT      dot5SrRouteControl        MIN-ACCESS  read-only        DESCRIPTION            "Write access is not required."        OBJECT      dot5SrRouteDescr        MIN-ACCESS  read-only        DESCRIPTION            "Write access is not required."    ::= { dot5SrCompliances 1 }-- units of conformancedot5SrRouteGroup  OBJECT-GROUP    OBJECTS   { dot5SrRouteControl,                dot5SrRouteDescr,                dot5SrRouteStatus              }    STATUS    current    DESCRIPTION        "A collection of objects providing for the management of        source routes in stations on IEEE 802.5 source-routing        networks."    ::= { dot5SrGroups 1 }END