with a contiguous range of vci's, or a 'label range'        for LDP Entities.        LDP Entities which use ATM must have at least one        entry in this table.        There must exist at least one entry in this        table for every LDP Entity that has        'mplsLdpEntityOptionalParameters' object with        a value of 'atmSessionParameters'."    ::= { mplsLdpEntityAtmObjects 2 }mplsLdpEntityAtmLREntry OBJECT-TYPE    SYNTAX MplsLdpEntityAtmLREntry    MAX-ACCESS not-accessible    STATUS current    DESCRIPTION        "A row in the LDP Entity ATM Label        Range Table.  One entry in this table contains        information on a single range of labels        represented by the configured Upper and Lower        Bounds VPI/VCI pairs.  These are the same        data used in the Initialization Message.        NOTE:  The ranges for a specific LDP Entity        are UNIQUE and non-overlapping.  For example,        for a specific LDP Entity index, there could        be one entry having LowerBound vpi/vci == 0/32, and        UpperBound vpi/vci == 0/100, and a second entry        for this same interface with LowerBound        vpi/vci == 0/101 and UpperBound vpi/vci == 0/200.        However, there could not be a third entry with        LowerBound vpi/vci == 0/200 and        UpperBound vpi/vci == 0/300 because this label        range overlaps with the second entry (i.e., both        entries now have 0/200).        A row will not become active unless a unique and        non-overlapping range is specified.        At least one label range entry for a        specific LDP Entity MUST        include the default VPI/VCI  values denoted        in the LDP Entity Table.        A request to create a row with an overlapping        range should result in an inconsistentValue        error."    INDEX       {  mplsLdpEntityLdpId,                   mplsLdpEntityIndex,                   mplsLdpEntityAtmLRMinVpi,                   mplsLdpEntityAtmLRMinVci                }    ::= { mplsLdpEntityAtmLRTable 1 }MplsLdpEntityAtmLREntry ::= SEQUENCE {    mplsLdpEntityAtmLRMinVpi       AtmVpIdentifier,    mplsLdpEntityAtmLRMinVci       MplsAtmVcIdentifier,    mplsLdpEntityAtmLRMaxVpi       AtmVpIdentifier,    mplsLdpEntityAtmLRMaxVci       MplsAtmVcIdentifier,    mplsLdpEntityAtmLRStorageType  StorageType,    mplsLdpEntityAtmLRRowStatus    RowStatus}mplsLdpEntityAtmLRMinVpi OBJECT-TYPE    SYNTAX AtmVpIdentifier    MAX-ACCESS not-accessible    STATUS current    DESCRIPTION        "The minimum VPI number configured for this range.        The value of zero is a valid value for the VPI portion        of the label."    ::= { mplsLdpEntityAtmLREntry 1 }mplsLdpEntityAtmLRMinVci OBJECT-TYPE    SYNTAX MplsAtmVcIdentifier    MAX-ACCESS not-accessible    STATUS current    DESCRIPTION        "The minimum VCI number configured for this range."    ::= { mplsLdpEntityAtmLREntry 2 }mplsLdpEntityAtmLRMaxVpi OBJECT-TYPE    SYNTAX AtmVpIdentifier    MAX-ACCESS read-create    STATUS current    DESCRIPTION        "The maximum VPI number configured for this range."    ::= { mplsLdpEntityAtmLREntry 3 }mplsLdpEntityAtmLRMaxVci OBJECT-TYPE    SYNTAX MplsAtmVcIdentifier    MAX-ACCESS read-create    STATUS current    DESCRIPTION        "The maximum VCI number configured for this range."   ::= { mplsLdpEntityAtmLREntry 4 }mplsLdpEntityAtmLRStorageType  OBJECT-TYPE    SYNTAX      StorageType    MAX-ACCESS  read-create    STATUS      current    DESCRIPTION        "The storage type for this conceptual row.        Conceptual rows having the value 'permanent(4)'        need not allow write-access to any columnar        objects in the row."    DEFVAL { nonVolatile }    ::= { mplsLdpEntityAtmLREntry 5 }mplsLdpEntityAtmLRRowStatus OBJECT-TYPE    SYNTAX RowStatus    MAX-ACCESS read-create    STATUS current    DESCRIPTION        "The status of this conceptual row.  All writable         objects in this row may be modified at any time,         however, as described in detail in the section         entitled, 'Changing Values After Session         Establishment', and again described in the         DESCRIPTION clause of the         mplsLdpEntityAdminStatus object,         if a session has been initiated with a Peer,         changing objects in this table will         wreak havoc with the session and interrupt traffic.         To repeat again:  the recommended procedure         is to set the mplsLdpEntityAdminStatus to         down, thereby explicitly causing a session         to be torn down. Then, change objects in this         entry, then set the mplsLdpEntityAdminStatus         to enable which enables a new session         to be initiated."    ::= { mplsLdpEntityAtmLREntry 6 }---- MPLS LDP ATM Session Information--mplsLdpAtmSessionObjects OBJECT IDENTIFIER ::=                               { mplsLdpAtmObjects 2 }mplsLdpAtmSessionTable OBJECT-TYPE    SYNTAX      SEQUENCE OF MplsLdpAtmSessionEntry    MAX-ACCESS  not-accessible    STATUS      current    DESCRIPTION        "A table which relates sessions in the        'mplsLdpSessionTable' and their label        range intersections.  There could be one        or more label range intersections between an        LDP Entity and LDP Peer using ATM as the        underlying  media.  Each row represents        a single label range intersection.        This table cannot use the 'AUGMENTS'        clause because there is not necessarily        a one-to-one mapping between this table        and the mplsLdpSessionTable."    ::= { mplsLdpAtmSessionObjects 1 }mplsLdpAtmSessionEntry OBJECT-TYPE    SYNTAX      MplsLdpAtmSessionEntry    MAX-ACCESS  not-accessible    STATUS      current    DESCRIPTION        "An entry in this table represents information on a        single label range intersection between an LDP Entity        and LDP Peer.        The information contained in a row is read-only."    INDEX       { mplsLdpEntityLdpId,                  mplsLdpEntityIndex,                  mplsLdpPeerLdpId,                  mplsLdpSessionAtmLRLowerBoundVpi,                  mplsLdpSessionAtmLRLowerBoundVci                }    ::= { mplsLdpAtmSessionTable 1 }MplsLdpAtmSessionEntry ::= SEQUENCE {    mplsLdpSessionAtmLRLowerBoundVpi     AtmVpIdentifier,    mplsLdpSessionAtmLRLowerBoundVci     MplsAtmVcIdentifier,    mplsLdpSessionAtmLRUpperBoundVpi     AtmVpIdentifier,    mplsLdpSessionAtmLRUpperBoundVci     MplsAtmVcIdentifier}mplsLdpSessionAtmLRLowerBoundVpi OBJECT-TYPE    SYNTAX AtmVpIdentifier    MAX-ACCESS not-accessible    STATUS current    DESCRIPTION        "The minimum VPI number for this range."    ::= { mplsLdpAtmSessionEntry 1 }mplsLdpSessionAtmLRLowerBoundVci OBJECT-TYPE    SYNTAX MplsAtmVcIdentifier    MAX-ACCESS not-accessible    STATUS current    DESCRIPTION        "The minimum VCI number for this range."    ::= { mplsLdpAtmSessionEntry 2 }mplsLdpSessionAtmLRUpperBoundVpi OBJECT-TYPE    SYNTAX AtmVpIdentifier    MAX-ACCESS read-only    STATUS current    DESCRIPTION        "The maximum VPI number for this range."    ::= { mplsLdpAtmSessionEntry 3 }mplsLdpSessionAtmLRUpperBoundVci OBJECT-TYPE    SYNTAX MplsAtmVcIdentifier    MAX-ACCESS read-only    STATUS current    DESCRIPTION        "The maximum VCI number for this range."    ::= { mplsLdpAtmSessionEntry 4 }--**************************************************************-- Module Conformance Statement--**************************************************************mplsLdpAtmGroups    OBJECT IDENTIFIER ::= { mplsLdpAtmConformance 1 }mplsLdpAtmCompliances    OBJECT IDENTIFIER ::= { mplsLdpAtmConformance 2 }---- Full Compliance--mplsLdpAtmModuleFullCompliance MODULE-COMPLIANCE    STATUS current    DESCRIPTION        "The Module is implemented with support for        read-create and read-write.  In other words,        both monitoring and configuration        are available when using this MODULE-COMPLIANCE."    MODULE -- this module    MANDATORY-GROUPS    {                           mplsLdpAtmGroup                        }    OBJECT       mplsLdpEntityAtmRowStatus    SYNTAX       RowStatus { active(1) }    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }    DESCRIPTION       "Support for createAndWait and notInService is not required."    OBJECT       mplsLdpEntityAtmLRRowStatus    SYNTAX       RowStatus { active(1) }    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }    DESCRIPTION       "Support for createAndWait and notInService is not required."    ::= { mplsLdpAtmCompliances 1 }---- Read-Only Compliance--mplsLdpAtmModuleReadOnlyCompliance MODULE-COMPLIANCE    STATUS current    DESCRIPTION        "The Module is implemented with support for        read-only.  In other words, only monitoring        is available by implementing this MODULE-COMPLIANCE."    MODULE -- this module    MANDATORY-GROUPS    {                           mplsLdpAtmGroup                        }    OBJECT       mplsLdpEntityAtmIfIndexOrZero    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmMergeCap    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmVcDirectionality    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmLsrConnectivity    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmDefaultControlVpi    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmDefaultControlVci    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmUnlabTrafVpi    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmUnlabTrafVci    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmStorageType    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmRowStatus    SYNTAX       RowStatus { active(1) }    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required, and active is the       only status that needs to be supported."    OBJECT       mplsLdpEntityAtmLRMaxVpi    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmLRMaxVci    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmLRStorageType    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required."    OBJECT       mplsLdpEntityAtmLRRowStatus    SYNTAX       RowStatus { active(1) }    MIN-ACCESS   read-only    DESCRIPTION       "Write access is not required, and active is the       only status that needs to be supported."    ::= { mplsLdpAtmCompliances 2 }---- units of conformance--mplsLdpAtmGroup OBJECT-GROUP    OBJECTS {    mplsLdpEntityAtmIfIndexOrZero,    mplsLdpEntityAtmMergeCap,    mplsLdpEntityAtmLRComponents,    mplsLdpEntityAtmVcDirectionality,    mplsLdpEntityAtmLsrConnectivity,    mplsLdpEntityAtmDefaultControlVpi,    mplsLdpEntityAtmDefaultControlVci,    mplsLdpEntityAtmUnlabTrafVpi,    mplsLdpEntityAtmUnlabTrafVci,    mplsLdpEntityAtmStorageType,    mplsLdpEntityAtmRowStatus,    mplsLdpEntityAtmLRMaxVpi,    mplsLdpEntityAtmLRMaxVci,    mplsLdpEntityAtmLRStorageType,    mplsLdpEntityAtmLRRowStatus,    mplsLdpSessionAtmLRUpperBoundVpi,    mplsLdpSessionAtmLRUpperBoundVci    }    STATUS    current    DESCRIPTION        "Objects that apply to all MPLS LDP implementations        using ATM as the Layer 2."    ::= { mplsLdpAtmGroups 1 }END