# Generated by the VisualDSP++ IDDE

# Note:  Any changes made to this Makefile will be lost the next time the
# matching project file is loaded into the IDDE.  If you wish to preserve
# changes, rename this file and run it externally to the IDDE.

# The syntax of this Makefile is such that GNU Make v3.77 or higher is
# required.

# The current working directory should be the directory in which this
# Makefile resides.

# Supported targets:
#     qpsk_Debug
#     qpsk_Debug_clean

# Define this variable if you wish to run this Makefile on a host
# other than the host that created it and VisualDSP++ may be installed
# in a different directory.

ADI_DSP=C:\Program Files\Analog Devices\VisualDSP 4.5


# $VDSP is a gmake-friendly version of ADI_DIR

empty:=
space:= $(empty) $(empty)
VDSP_INTERMEDIATE=$(subst \,/,$(ADI_DSP))
VDSP=$(subst $(space),\$(space),$(VDSP_INTERMEDIATE))

RM=cmd /C del /F /Q

#
# Begin "qpsk_Debug" configuration
#

ifeq ($(MAKECMDGOALS),qpsk_Debug)

qpsk_Debug : ./Debug/qpsk.dxe 

./Debug/cycle_count.doj :./cycle_count.asm 
	@echo ".\cycle_count.asm"
	$(VDSP)/easmblkfn.exe .\cycle_count.asm -proc ADSP-BF533 -g -o .\Debug\cycle_count.doj -MM

./Debug/qpsk.doj :./qpsk.asm 
	@echo ".\qpsk.asm"
	$(VDSP)/easmblkfn.exe .\qpsk.asm -proc ADSP-BF533 -g -o .\Debug\qpsk.doj -MM

./Debug/qpsk_test.doj :qpsk_test.c $(VDSP)/Blackfin/include/stdio.h $(VDSP)/Blackfin/include/yvals.h $(VDSP)/Blackfin/include/sys/stdio_bf.h tqpsk.h 
	@echo ".\qpsk_test.c"
	$(VDSP)/ccblkfn.exe -c .\qpsk_test.c -file-attr ProjectName=qpsk -g -no-multiline -double-size-32 -decls-strong -warn-protos -proc ADSP-BF533 -o .\Debug\qpsk_test.doj -MM

./Debug/qpsk.dxe :./Debug/qpsk_test.doj ./Debug/qpsk.doj ./Debug/cycle_count.doj adsp-BF533_C.ldf $(VDSP)/Blackfin/lib/bf532_rev_0.3/crtsfc532y.doj Debug/cycle_count.doj Debug/qpsk.doj Debug/qpsk_test.doj $(VDSP)/Blackfin/lib/cplbtab533.doj $(VDSP)/Blackfin/lib/bf532_rev_0.3/crtn532y.doj $(VDSP)/Blackfin/lib/bf532_rev_0.3/libsmall532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/__initsbsz532.doj $(VDSP)/Blackfin/lib/bf532_rev_0.3/libc532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libm3free532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libevent532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libx532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libio532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libcpp532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libcpprt532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libdsp532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libsftflt532y.dlb $(VDSP)/Blackfin/lib/libetsi532.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/idle532y.doj $(VDSP)/Blackfin/lib/bf532_rev_0.3/librt_fileio532y.dlb 
	@echo "Linking..."
	$(VDSP)/ccblkfn.exe .\Debug\cycle_count.doj .\Debug\qpsk.doj .\Debug\qpsk_test.doj -T .\adsp-BF533_C.ldf -L .\Debug -add-debug-libpaths -flags-link -od,.\Debug -o .\Debug\qpsk.dxe -proc ADSP-BF533 -flags-link -MM

endif

ifeq ($(MAKECMDGOALS),qpsk_Debug_clean)

qpsk_Debug_clean:
	-$(RM) ".\Debug\cycle_count.doj"
	-$(RM) ".\Debug\qpsk.doj"
	-$(RM) ".\Debug\qpsk_test.doj"
	-$(RM) ".\Debug\qpsk.dxe"
	-$(RM) ".\Debug\*.ipa"
	-$(RM) ".\Debug\*.opa"
	-$(RM) ".\Debug\*.ti"
	-$(RM) ".\*.rbld"

endif