148  1        POCON0L        =  0x0000;      // load output control register
  149  1        DP0L           =  0x0000;      // load direction register
  150  1      
  151  1        ///  -----------------------------------------------------------------------
  152  1        ///  Configuration of Port P1H:
  153  1        ///  -----------------------------------------------------------------------
  154  1        ///  - no pin of port P1H is used
  155  1      
  156  1        P1H            =  0x0000;      // load data register
  157  1        ALTSEL0P1H     =  0x0000;      // load alternate output function select 
  158  1                                       // register 0
  159  1        POCON1H        =  0x0000;      // load output control register
  160  1        DP1H           =  0x0000;      // load direction register
  161  1      
  162  1        ///  -----------------------------------------------------------------------
  163  1        ///  Configuration of Port P1L:
  164  1        ///  -----------------------------------------------------------------------
  165  1        ///  - no pin of port P1L is used
  166  1      
  167  1        P1L            =  0x0000;      // load data register
  168  1        ALTSEL0P1L     =  0x0000;      // load alternate output function select 
  169  1                                       // register 0
  170  1        POCON1L        =  0x0000;      // load output control register
  171  1        DP1L           =  0x0000;      // load direction register
  172  1      
  173  1        ///  -----------------------------------------------------------------------
  174  1        ///  Configuration of Port P3:
  175  1        ///  -----------------------------------------------------------------------
  176  1        ///  P3.10 is used as alternate output for the ASC0 Transmit Data Output 
  177  1        ///  (TxDA0)
  178  1        ///  - push/pull output is selected
  179  1        ///  P3.11 is used as alternate input for the ASC0 Receive data Input 
C166 COMPILER V6.04, IO                                                                    08/30/2007 14:28:44 PAGE 4   

  180  1        ///  (RxDA0)
  181  1      
  182  1        ///  P3.0 - P3.7 threshold type: TTL input
  183  1        ///  P3.8 - P3.15 threshold type: TTL input
  184  1      
  185  1        ///  P3.0 - P3.3 output driver characteristic: strong driver
  186  1        ///  P3.4 - P3.7 output driver characteristic: strong driver
  187  1        ///  P3.8 - P3.11 output driver characteristic: strong driver
  188  1        ///  P3.12 - P3.15 output driver characteristic: strong driver
  189  1      
  190  1        ///  P3.0 - P3.3 output edge characteristic: sharp edge mode
  191  1        ///  P3.4 - P3.7 output edge characteristic: sharp edge mode
  192  1        ///  P3.8 - P3.11 output edge characteristic: sharp edge mode
  193  1        ///  P3.12 - P3.15 output edge characteristic: sharp edge mode
  194  1      
  195  1        ODP3           =  0x0000;      // load open-drain register
  196  1        P3             =  0x0000;      // load data register
  197  1        ALTSEL0P3      =  0x0000;      // load alternate output function select 
  198  1                                       // register 0
  199  1        ALTSEL1P3      =  0x0000;      // load alternate output function select 
  200  1                                       // register 1
  201  1        POCON3         =  0x0000;      // load output control register
  202  1        DP3            =  0x0000;      // load direction register
  203  1      
  204  1        ///  -----------------------------------------------------------------------
  205  1        ///  Configuration of Port P4:
  206  1        ///  -----------------------------------------------------------------------
  207  1        ///  P4.0 is used as alternate input for the Port Pin (A16)
  208  1        ///  P4.1 is used as alternate input for the Port Pin (A17)
  209  1        ///  P4.2 is used as alternate input for the Chip select (CS1_n)
  210  1        ///  P4.3 is used as alternate input for the Chip select (CS0_n)
  211  1      
  212  1        ///  P4.0 - P4.7 threshold type: TTL input
  213  1      
  214  1        ///  P4.0 - P4.3 output driver characteristic: strong driver
  215  1        ///  P4.4 - P4.7 output driver characteristic: strong driver
  216  1      
  217  1        ///  P4.0 - P4.3 output edge characteristic: sharp edge mode
  218  1        ///  P4.4 - P4.7 output edge characteristic: sharp edge mode
  219  1      
  220  1        ODP4           =  0x0000;      // load open-drain register
  221  1        P4             =  0x0000;      // load data register
  222  1        ALTSEL0P4      =  0x0000;      // load alternate output function select 
  223  1                                       // register 0
  224  1        ALTSEL1P4      =  0x0000;      // load alternate output function select 
  225  1                                       // register 1
  226  1        POCON4         =  0x0000;      // load output control register
  227  1        DP4            =  0x0000;      // load direction register
  228  1      
  229  1        ///  -----------------------------------------------------------------------
  230  1        ///  Configuration of Port P5:
  231  1        ///  -----------------------------------------------------------------------
  232  1        ///  - no pin of port P5 is used
  233  1      
  234  1        P5             =  0x0000;      // load data register
  235  1      
  236  1        ///  -----------------------------------------------------------------------
  237  1        ///  Configuration of Port P9:
  238  1        ///  -----------------------------------------------------------------------
  239  1        ///  P9.4 is used as general input
  240  1        ///  P9.5 is used as general input
  241  1      
C166 COMPILER V6.04, IO                                                                    08/30/2007 14:28:44 PAGE 5   

  242  1        ///  P9.0 - P9.7 threshold type: TTL input
  243  1      
  244  1        ///  P9.0 - P9.3 output driver characteristic: strong driver
  245  1        ///  P9.4 - P9.7 output driver characteristic: strong driver
  246  1      
  247  1        ///  P9.0 - P9.3 output edge characteristic: sharp edge mode
  248  1        ///  P9.4 - P9.7 output edge characteristic: sharp edge mode
  249  1      
  250  1        ODP9           =  0x0000;      // load open-drain register
  251  1        P9             =  0x0000;      // load data register
  252  1        ALTSEL0P9      =  0x0000;      // load alternate output function select 
  253  1                                       // register 0
  254  1        ALTSEL1P9      =  0x0000;      // load alternate output function select 
  255  1                                       // register 1
  256  1        POCON9         =  0x0000;      // load output control register
  257  1        DP9            =  0x0000;      // load direction register
  258  1      
  259  1        ///  -----------------------------------------------------------------------
  260  1        ///  Configuration of Port P20:
  261  1        ///  -----------------------------------------------------------------------
  262  1        ///  - no pin of port P20 is used
  263  1      
  264  1        P20            =  0x0000;      // load data register
  265  1        POCON20        =  0x0000;      // load output control register
  266  1        DP20           =  0x0000;      // load direction register
  267  1      
  268  1      
  269  1        // USER CODE BEGIN (IO_Function,3)
  270  1      
  271  1        // USER CODE END
  272  1      
  273  1      } //  End of function IO_vInit
  274         
  275         
  276         
  277         
  278         // USER CODE BEGIN (IO_General,10)
  279         
  280         // USER CODE END
  281         


MODULE INFORMATION:   INITIALIZED  UNINITIALIZED
  CODE SIZE        =         170     --------
  NEAR-CONST SIZE  =    --------     --------
  FAR-CONST SIZE   =    --------     --------
  HUGE-CONST SIZE  =    --------     --------
  XHUGE-CONST SIZE =    --------     --------
  NEAR-DATA SIZE   =    --------     --------
  FAR-DATA SIZE    =    --------     --------
  XHUGE-DATA SIZE  =    --------     --------
  IDATA-DATA SIZE  =    --------     --------
  SDATA-DATA SIZE  =    --------     --------
  BDATA-DATA SIZE  =    --------     --------
  HUGE-DATA SIZE   =    --------     --------
  BIT SIZE         =    --------     --------
  INIT'L SIZE      =    --------     --------
END OF MODULE INFORMATION.


C166 COMPILATION COMPLETE.  0 WARNING(S),  0 ERROR(S)