/*************************************************************************************************************************

 Author        	: ADI CAST (China Applications)
 Date          	: 19/8/2005
 Revised       	: 2006/01/25
 File          	: AD9956.c
 Hardware      	: ADUC812 is used to control ad9956.The core clock of ADUC812 is 2.097152MHZ.
 Description   	: The example code is used to generate a single frequency.

 Test condition	: 
 Hardware	: AD9956 Evaluation Board
 Input Frequency: 1750MHz
 R Divider	: 8,  The system core frequency is 218.75MHz.
*************************************************************************************************************************/

#include <stdio.h> 
#include <ADuC812.h>

typedef unsigned char uc;

/*************************************************************************************************************************
DEFINE CONTROL PINS OF ADUC812 FOR THE AD9956 CONTROL.
Customers should define the pins according to their design.
**************************************************************************************************************************/
sbit    SCLOCK=P3^1;
sbit    SDI=P3^3;
sbit    SDO=P3^2;
sbit    CSB=P3^5;
sbit    RESET =P3^7;
sbit    IORST=P2^6;
sbit    FUD=P2^0;   		    					
sbit    PS0=P2^1;
sbit	PS1=P2^5;
sbit	PS2=P2^4;

void write1byte(uc byte);
void write5byte(uc addr,uc byte0,uc byte1,uc byte2,uc byte3);
void write6byte(uc addr,uc byte0,uc byte1,uc byte2,uc byte3,uc byte4);
void write9byte(uc addr,uc byte0,uc byte1,uc byte2,uc byte3,uc byte4,uc byte5,uc byte6,uc byte7);
void writeSCBandFUD();
void delay(int);

main()
{		
	RESET=1;							//initialization
	RESET=0;
	IORST=1;
	IORST=0;
	SCLOCK=0;
	PS0=0;
	PS1=0;
	PS2=0;
	SDO=0;
	CSB=1;
	FUD=0;

	/*=================================================================================================================
	SINGLE TONE MODE
	First set CFR1 and CFR2
	Then set the FTW0 as 70MHz
	=================================================================================================================*/
	CSB=0;	
	write5byte(0x00,0x00,0x10,0x00,0x00);				//write cfr1	
	write6byte(0x01,0x00,0x00,0x78,0x00,0x07);			//write cfr2
	write9byte(0x06,0x00,0x00,0x51,0xeb,0x85,0x1e,0xb8,0x52);	//write ftw0	Frequency=70MHz
	CSB=1;

}


/**************************************************************************************************************************
Subroutines
***************************************************************************************************************************/

void delay(int length)
{
	while (length >=0)
    	length--;
}


void write5byte(uc addr,uc byte0,uc byte1,uc byte2,uc byte3)
{
	write1byte(addr);
	write1byte(byte0);
	write1byte(byte1);
	write1byte(byte2);
	write1byte(byte3);
	writeSCBandFUD();
}

void write6byte(uc addr,uc byte0,uc byte1,uc byte2,uc byte3,uc byte4)
{
	write1byte(addr);
	write1byte(byte0);
	write1byte(byte1);
	write1byte(byte2);
	write1byte(byte3);
	write1byte(byte4);
	writeSCBandFUD();
}

void write9byte(uc addr,uc byte0,uc byte1,uc byte2,uc byte3,uc byte4,uc byte5,uc byte6,uc byte7)
{
	write1byte(addr);
	write1byte(byte0);
	write1byte(byte1);
	write1byte(byte2);
	write1byte(byte3);
	write1byte(byte4);
	write1byte(byte5);
	write1byte(byte6);
	write1byte(byte7);
	writeSCBandFUD();
}

void write1byte(uc byte)
{
	uc temp1;
	int i;
	temp1=0x80;
	CSB=0;
    	SDI=0;                                  

    	for(i=0;i<8;i++)		
    	{
        	if((byte&temp1)==0x0)		
          		SDI=0;
       		else
           		SDI=1;
        	SCLOCK=0;
		delay(10);
        	SCLOCK=1;
		delay(10);
       		SCLOCK=0;
       		temp1=temp1>>1;
    	}	
    	temp1=0x80;
}

void writeSCBandFUD()
{
	CSB=1;		 			
	FUD=0;      		    						
	FUD=1;
	delay(50);
	FUD=0;
	delay(350);
}