"Irq"=dword:3E
    "GpioTrans"=dword:91
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\UFN]
    "Prefix"="UFN"
    "Dll"="usbfn.dll"
    "Index"=dword:1
    "Order"=dword:20
    "MemBase"=multi_sz:"FFFB4000","FFFED900","FFFED940"
    "MemLen"=multi_sz:"00000400","00000040","00000040"
    "Irq"=multi_sz:"3D","02","03"
    "IClass"= multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b"
    "BusIoctl"=dword:2a0048
ENDIF BSP_NOUSBFN !
ENDIF BSP_NOUSB !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_USBFN
;-------------------------------------------------------------------------------

;-------------------------------------------------------------------------------
; @CESYSGEN IF CE_MODULES_USBD
; @CESYSGEN IF CE_MODULES_USBFN
; @XIPREGION IF PACKAGE_OEMDRIVERS
IF BSP_NOUSB !
IF BSP_USB_OHCI
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\OTG]
    "SupportHCD"=dword:1
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\HCD]
    "Prefix"="HCD"
    "Dll"="ohcd.dll"
    "Index"=dword:1
    "Order"=dword:20
    "MemBase"=dword:FFFBA000
    "MemLen"=dword:00000400
    "Irq"=dword:3B
    "IClass"=multi_sz:"{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b"
    "BusIoctl"=dword:002a0048
ENDIF BSP_USB_OHCI
ENDIF BSP_NOUSB !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_USBFN
; @CESYSGEN ENDIF CE_MODULES_USBD
;-------------------------------------------------------------------------------

;-- SDIO host controller driver ------------------------------------------------
; @CESYSGEN IF CE_MODULES_SDBUS
; @XIPREGION IF PACKAGE_OEMDRIVERS
IF BSP_NOSDHC !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC]
    "Order"=dword:21
    "Dll"="sdhc.dll"
    "Prefix"="SHC"
    "MemBase"=dword:FFFB7800
    "MemLen"=dword:00000100
    "SDIOPriority"=dword:d3
    "CDPriority"=dword:d4
    ; "BaseClockFrequency"=dword: ; you can override the max clock rate (24 MHz) here

    ; "SDIOSysIntr"=dword:
    "SDIOIrq"=dword:37          ; 54 decimal
;jiangyanjun add 2007-05-16@11:00, changing CardDetectGPIO value from 0x08 to 0x4d
    "CardDetectGPIO"=dword:4d       ; card insertion detection is done via GPIO 0x4d
;jiangyanjun add 2007-05-16@11:00, power supply GPIO
    "CardPowerGPIO"=dword:27
    "CardInsertedState"=dword:0     ; logical 0 means a card is inserted
;jiangyanjun add 2007-05-16@11:00, GPIO_67 use  already for bluetooth, no use here
    ;"CardReadWriteGPIO"=dword:43    ; card R/W protection detection is done via GPIO 0x43
;jiangyanjun add 2007-05-16@11:00, no use
    ;"CardWriteProtectedState"=dword:1 ; logical 1 means the card is write protected

    ; "CardDetectSysIntr"=dword:
    ; "CardDetectIrq"=dword:

    ; "DmaSysIntr"=dword:
    "DmaIrq"=dword:58           ; 88 decimal, IRQ_DMA_CH10

    ; uncomment the line below to enable the GPIO workaround to the SDIO interrupt problem
    "EnableGPIOWorkaround"=dword:1

    ; uncomment the line below to enable the INAB workaround to the SDIO interrupt problem
    ; "EnableINABWorkaround"=dword:1

    "WakeupSources"=dword:2 ; 0 - no wakeup, 1 - wakeup on SDIO, 2 - wakeup on card detect, 3 - wakeup on both

    "IClass"=multi_sz:"{A32942B7-920C-486b-B0E6-92A702A99B35}"

ENDIF BSP_NOSDHC !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_SDBUS
;-------------------------------------------------------------------------------

;-- Serial driver --------------------------------------------------------------
; @CESYSGEN IF CE_MODULES_SERIAL
; @XIPREGION IF PACKAGE_OEMDRIVERS
IF BSP_NOSERIAL  !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial]
    "Prefix"="COM"
    "Dll"="uart.dll"
    "Index"=dword:1
    "Order"=dword:9
    "DeviceArrayIndex"=dword:0
    "MemBase"=multi_sz:"FFFB0000","FFFE1000"
    "MemLen"=multi_sz:"00000400","00000800"
    "Irq"=dword:2F
ENDIF BSP_NOSERIAL !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_SERIAL
;-------------------------------------------------------------------------------

;-- Serial driver for GPS tanyu 2007-8-2 --------------------------------------
; @CESYSGEN IF CE_MODULES_SERIAL
; @XIPREGION IF PACKAGE_OEMDRIVERS
;IF BSP_NOSERIAL  !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial4GPS]
    "Prefix"="COM"
    "Dll"="GPS_uart.dll"
    "Index"=dword:3
    "Order"=dword:10
    "DeviceArrayIndex"=dword:3
    "IrqGPIO"=dword:52 ;82
    "Priority256"=dword:67
    "RxBuffer"=dword:2000
;ENDIF BSP_NOSERIAL !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_SERIAL
;-------------------------------------------------------------------------------
;-- Bluetooth driver --------------------------------------------------------------
; @CESYSGEN IF CE_MODULES_BTD
; @XIPREGION IF PACKAGE_OEMDRIVERS
IF BSP_NOBLUETOOTH  !

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial]
    "HWMode"=dword:1

; Modified by yangyuan@Longcheer for BlueTooth 2006-12-1 15:16
[-HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Transports\BuiltIn\1]
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Transports\BuiltIn\1]
    "Driver"="bthbcsp.dll"
    "Baud"=dword:1BFCD8       ;3686400(0x384000--PSKey:15100(3afc));1834200(0x1BFCD8--PSKey: 7513(0x1d59)); 921600(e1000-PSkey:0ebf) ;115200  ;230400
    "Priority256"=dword:84    ;132
    "PacketSize"=dword:c0     ;192
    "SerialTimeoutConstant"=dword:5
    "SerialIntervalTimeout"=dword:ffffffff
    "ReopenDelay"=dword:64    ;100
    "FlashChip"=dword:0
; Add by yangyuan;2007-3-1 for the 3rd hardware version;

    "BtPowerGpio"=dword:4e    ;78
    "BtResetGpio"=dword:85    ;133

; Option
    "serialBufferSize"=dword:1000
    "dumpKeys"=dword:0
    "sniffMethod"=dword:0
;   "powerManagementEnabled"=dword:0

; ++ Added by yangyuan@Longcheer 2007-1-4 15:34 for Bluetooth receive file
; [HKEY_LOCAL_MACHINE\Software\Microsoft\Obex]
;      "IsEnabled"=-
;      "IsEnabled"=dword:1
; -- Added by yangyuan@Longcheer 2007-1-4 15:34 for Bluetooth receive file

;   "Driver"="brf6100.dll"

; Enable handsfree/headset profile support
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\HandsfreeProfileOn]

ENDIF BSP_NOBLUETOOTH !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_BTD
;-------------------------------------------------------------------------------

;-- IrDA -----------------------------------------------------------------------
; @CESYSGEN IF CE_MODULES_IRDASTK
; @XIPREGION IF PACKAGE_OEMDRIVERS
IF BSP_NOIRDA !
; Remove irsir entries that come from the os package (common.reg)
[-HKEY_LOCAL_MACHINE\Comm\Irsir]
[-HKEY_LOCAL_MACHINE\Comm\Irsir1]

[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
    "Bind"=multi_sz:"IrDA1"

[HKEY_LOCAL_MACHINE\Comm\IrDA]
   "DisplayName"=LOC_DISPLAYNAME_IRSIR
   "Group"="NDIS"
   "ImagePath"="irda.dll"

[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
   "Route"=multi_sz:"IrDA1"

[HKEY_LOCAL_MACHINE\Comm\IrDA1\Parms]
   "BusNumber"=dword:0
   "BusType"=dword:0
   "MemBase"=dword:FFFB0800
   "MemLen"=dword:0800
   "Irq"=dword:2E
; add by jiangyanjun, control IR Tx GPIO_37, IR Rx GPIO_38
   "IrTxGPIO"=dword:25
   "IrRxGPIO"=dword:26
; add by jiangyanjun, control IR shutdown GPIO_67
; modified by jiangyanjun; 2007-3-1; for the 3rd hw version;
    "IrShutDownGPIO"=dword:43

ENDIF BSP_NOIRDA !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_IRDASTK
;-------------------------------------------------------------------------------

;Added by caijianbing 2007-6-20
;------------------------------------------------------------------------------
; @CESYSGEN IF SHELLW_MODULES_CAMERADIAGNOSE
#include "$(_TARGETPLATROOT)\Files\Drivers\camera\ov9650.reg"
; @CESYSGEN ENDIF SHELLW_MODULES_CAMERADIAGNOSE
;===============================================================================

; @CESYSGEN ENDIF CE_MODULES_DEVICE
;===============================================================================

;===============================================================================
; @CESYSGEN IF CE_MODULES_DISPLAY
; @XIPREGION IF PACKAGE_OEMDRIVERS
IF BSP_NODISPLAY !

[HKEY_LOCAL_MACHINE\SYSTEM\GWE]
    ; "PORepaint"=dword:0 - the display driver handles everything
    ; "PORepaint"=dword:1 - gwe should save and restore the bits
    ; "PORepaint"=dword:2 - gwe should invalidate and repaint
    ; "PORepaint"=dword:3 - gwe and driver need to save video memory
    ;
    "PORepaint"=dword:1

[HKEY_LOCAL_MACHINE\System\GDI\Drivers]
    "Display"="ddi.dll"
    "MemBase"=multi_sz:"FFFEC000","FFFEE3C0","20002000","FFFED980","FFFE1000"
    "MemLen"=multi_sz:"00000100","00000040","00030000","00000040","00000800"
    "PowerDelay"=dword:ea60   ; 60s

; System enter idle mode after xxx s. Added by yangyuan@Longcheer 7/9/2007 11:04 AM
;[HKEY_CURRENT_USER\ControlPanel\Power]
;    "Display"=dword:A         ; 0x3c seconds == 1 min.

IF IMG131DPI
[HKEY_LOCAL_MACHINE\Drivers\Display\GPE]
"LogicalPixelsX"=dword:83
"LogicalPixelsY"=dword:83
ENDIF;IMG131DPI

ENDIF BSP_NODISPLAY !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_DISPLAY
;===============================================================================
;Added by yangzhihong,2007-4-21 11:23, disable touch panel detection when system start
;added by yangzhihong,for touch panel driver
; @XIPREGION IF PACKAGE_OEMDRIVERS
;[HKEY_LOCAL_MACHINE\Software\Microsoft\Welcome]
;			"Disable"=dword:FFFFFFFF
[HKEY_LOCAL_MACHINE\ControlPanel]
    "InputConfig"=dword:3    ; 3 => keybd and touch screen
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
IF _IMAGELANGIDLIST=0409
    "DriverName"="touch.dll"
ENDIF
IF _IMAGELANGIDLIST=0804
    "DriverName"="hwtouch.dll"
ENDIF
    "MaxCalError"=dword:10
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS

;------------------------Vibrator-----------------------------------------------
; Added by yangzhihong, 2007-01-23, for vibrator
; @CESYSGEN IF CE_MODULES_NLEDDRVR
; @XIPREGION IF PACKAGE_OEMDRIVERS
IF BSP_NONLED !
; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\System\Events]
    "SYSTEM/NLedAPIsReady"="Notification LED APIs"

; END HIVE BOOT SECTION

; These registry entries load the NLed driver.  The IClass value must match
; the NLED_DRIVER_CLASS definition in nled.h -- this is how the system
; knows which device is the battery driver.  Note that we are using
; DEVFLAGS_NAKEDENTRIES with this driver.  This tells the device manager
; to instantiate the device with the prefix named in the registry but to look
; for DLL entry points without the prefix.  For example, it will look for Init
; instead of NLD_Init.  This allows the prefix to be changed in the registry (if
; desired) without editing the driver code.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NLed]
    "Prefix"="NLD"
    "Dll"="nleddrvr.dll"
    "Flags"=dword:8                      ; DEVFLAGS_NAKEDENTRIES
    "Index"=dword:1
    "Order"=dword:0
    "IClass"="{CBB4F234-F35F-485b-A490-ADC7804A4EF3}"
; Modify by yangzhihong; 2007-3-1
    "GpioVibrator"=dword:91
ENDIF BSP_NONLED !
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
; @CESYSGEN ENDIF CE_MODULES_NLEDDRVR
;===============================================================================

;--------------------------------------------------------------------------------
;Added by yangzhihong,2007-06-26,14:57
; @XIPREGION IF PACKAGE_OEMDRIVERS
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\HDSHOOK]
    "Prefix"="HHK"
    "Dll"="hdshook.dll"
    "Flags"=dword:00010000
    "Index"=dword:1
    "Order"=dword:18
    "Gpio"=dword:4E
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
;===============================================================================

;-------------------------Power Manager-----------------------------------------------
; Added by yangzhihong, 2007_03_03
; Modified by JIANGYANJUN, 2007.08.21
; @XIPREGION IF PACKAGE_OEMDRIVERS
;
; In this system power state, the user may be interacting with the
; system, but the backlight is off
;
[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\State\BacklightOff]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\State\BacklightOff]
    "Default"=dword:0           ; D0
    "Flags"=dword:10010000      ; POWER_STATE_ON | POWER_STATE_PASSWORD
    "bkl1:"=dword:1             ; D1
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
;===============================================================================

;--------------------------------------------------------------------------------
; JIANGYANJUN add 2007.08.21
;
; @CESYSGEN IF PM_PM_PDA_PDD
; In this system power state, the system is suspended.  Devices are turned
; off, interrupts are not being serviced, and the CPU is stopped.
;
[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\State\Suspend]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\State\Suspend]
    "Default"=dword:3           ; D3
    "Flags"=dword:200000        ; POWER_STATE_SUSPEND
    "bkl1:"=dword:4             ; backlight off
; @CESYSGEN ENDIF PM_PM_PDA_PDD
;===============================================================================

; @XIPREGION IF PACKAGE_OEMDRIVERS
[HKEY_LOCAL_MACHINE\System\ErrorReporting\DumpSettings]
    "UploadClient"=""
    "HideCPL"=dword:1
[HKEY_LOCAL_MACHINE\System\ErrorReporting\UploadSettings]
    "DontUpload"=dword:1
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS


;--------------------------------------------------------------------------------
;Added by yangzhihong for unchecking "turn off device if no used for some minutes" in the power management page;2007-7-12
; @XIPREGION IF PACKAGE_OEMDRIVERS
[-HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro\Power\Timeouts]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\Timeouts]
; @CESYSGEN IF PM_PM_DEFAULT_PDD
    "ACUserIdle"=dword:3c               ; in seconds
    "ACSystemIdle"=dword:12c            ; in seconds
    "ACSuspend"=dword:0                 ; in seconds
    "BattUserIdle"=dword:3c             ; in seconds
    "BattSystemIdle"=dword:b4           ; in seconds
    "BattSuspend"=dword:12c             ; in seconds
; @CESYSGEN ENDIF ; PM_PM_DEFAULT_PDD
; @CESYSGEN IF PM_PM_PDA_PDD
    "ACSuspendTimeout"=dword:0          ; timeout disabled on AC power
    "ACResumingSuspendTimeout"=dword:F  ; 15 seconds
    "BattSuspendTimeout"=dword:3C        ; 1 minutes on battery
    "BattResumingSuspendTimeout"=dword:F; 15 seconds
; @CESYSGEN ENDIF ; PM_PM_PDA_PDD
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
;================================================================================

;----------------------3rd-----------------------------------------------------
;Added by caijianbing;2007-8-9
#include "$(_TARGETPLATROOT)\Files\3RD\3RD.reg"
;==============================================================================

;-------------------- dshow -----------------------------------------
;
; Add DShow Modules to target, yangyibin
IF LCT_DSHOW_ON
#include "$(_TARGETPLATROOT)\Files\3rd\DShow\DShow.reg"
ENDIF ; LCT_DSHOW_ON

;===============================================================================
;Added by yangzhihong,2007-8-14 16:33
; @XIPREGION IF PACKAGE_OEMDRIVERS
IF _IMAGELANGIDLIST=0409
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40c1]
    @="\"\\Windows\\Start Menu\\Programs\\Windows Media.lnk\""
    "WndCls"=""
    "BtnWnd"=dword:00000000
    "Flags"=dword:00000000
    "ResetFlags"=dword:00000001
    "Icon"="ShellRes.dll, 4617"
    "Name"="MP3 Button"
ENDIF
IF _IMAGELANGIDLIST=0804
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40c1]
    @="\x005C\x0022\x005C\x005C\x0057\x0069\x006E\x0064\x006F\x0077\x0073\x005C\x005C\x201C\x5F00\x59CB\x201D\x83DC\x5355\x005C\x005C\x7A0B\x5E8F\x005C\x005C\x0057\x0069\x006E\x0064\x006F\x0077\x0073\x0020\x004D\x0065\x0064\x0069\x0061\x002E\x006C\x006E\x006B\x005C\x0022"
    "WndCls"=""
    "BtnWnd"=dword:00000000
    "Flags"=dword:00000000
    "ResetFlags"=dword:00000001
    "Icon"="ShellRes.dll, -4617"
    "Name"="MP3 Button"
ENDIF

[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40c3]
    @="\"\\Windows\\camera.lnk\""
    "WndCls"=""
    "BtnWnd"=dword:00000000
    "Flags"=dword:00000000
    "ResetFlags"=dword:00000001
    "Icon"="ShellRes.dll, 4617"
    "Name"="Camera Button"
    ; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
;===============================================================================

;-------------------- contrast -----------------------------------------
;Added by dingxiaohua,2007-8-30 17:33

; @XIPREGION IF PACKAGE_OEMDRIVERS
[HKEY_LOCAL_MACHINE\ControlPanel\Contrast]
    "Redirect"=""
; @XIPREGION ENDIF PACKAGE_OEMDRIVERS
;===============================================================================