?? main2151.c
字號:
//////////////////////////////////////////////////////////////////////////////////////
///////////////////////////////////出租車計價器///////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////
#include <reg52.h>
#include <intrins.h>
#include <string.h>
#define uchar unsigned char
#define uint unsigned int
#define TIME0H 0x9C //0.1ms
sbit KEY_1= P1^0;
sbit KEY_2= P1^1;
sbit KEY_3= P1^2;
sbit KEY_4= P1^3;
uchar KEY;
uchar tpKEY;
//////////////////////////////////////////Menu//////////////////////////////////////////////
uchar setPriceMod=0;//0設置白天，1設置晚上
uchar priceMod=0;//0按白天計價，1按晚上計價
///////////////////////////////////計算用全局變量///////////////////////////////////////////
float dayPrice=5.5, nightPrice=6.5; //價格
float distance;//里程
uint wheelPerimeter=100;//車輪周長cm
uint circle=0; //圈數
///////////////////////////////////////顯示/////////////////////////////////////////////////
uchar data arr_dayPrice[3],arr_nightPrice[3];
uchar data arr_totalCost[3];
uchar data arr_distance[4];
uchar data arr_wheelPerimeter[3];
uchar data arr_circle[3];
//-----------------------------------LCD------------------------------
#define LCD12864_IO P0
#define LINE1 0
#define LINE2 1
#define HIGH 1
#define LOW 0
#define CLERADISPLAY LCD12864_command(0x01);
#define uchar unsigned char
#define uint unsigned int
sbit xssjj=P2^5;
uchar temp=33;
uchar code weiB_a[8]={0x80,0x40,0x20,0x10,0x08,0x04,0x02,0x01};
uchar code weiB_b[8]={0x80,0xa0,0x50,0x28,0x14,0x0a,0x05,0x01};
uchar weiB_c[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
int a=16;
uchar data juli[3];
/********************************************************************/
sbit LCD12864_EN=P2^2; //en
sbit LCD12864_DIN=P2^0; //rs
sbit LCD12864_CLK=P2^1; //rw
sbit cs1=P2^3;
sbit cs2=P2^4;
/********************************************************************/
//void lcd_gps_wei(unsigned char wei_x,unsigned char wei_y);
void LCD12864_DELAY(unsigned int a)
{
for(;a>0;a--)
_nop_();
}
/*******************************************************************/
void LCD12864_busy(void)
{
bit BF = 0;
LCD12864_EN=0;
LCD12864_DIN=0;
LCD12864_CLK=1;
LCD12864_IO=0xff; //單片機讀數據之前必須先置高位
do
{
LCD12864_EN=1;
BF=LCD12864_IO&0x80;
LCD12864_EN=0;
} while(BF);
}
/*******************************************************************/
// 寫入命令
/*******************************************************************/
void LCD12864_command(unsigned char command)
{
LCD12864_busy();
LCD12864_EN=0;
LCD12864_DIN=0;
LCD12864_CLK=0;
LCD12864_EN=1;
LCD12864_IO=command;
LCD12864_EN=0;
}
/*******************************************************************/
// 寫入一字節數據
/*******************************************************************/
void LCD12864_data(unsigned char dat)
{
LCD12864_busy();
LCD12864_EN=0;
LCD12864_DIN=1;
LCD12864_CLK=0;
LCD12864_EN=1;
LCD12864_IO=dat;
LCD12864_EN=0;
}
void LCD12864_char(unsigned char dat)
{
if((dat>=0)&&(dat<=9))
dat|=0x30;
LCD12864_data(dat);
}
/*******************************************************************/
// 設置顯示位置 X(1~8),Y(1~4)
/*******************************************************************/
void LCD12864_address(unsigned char line,unsigned char row)
{
switch(row)
{
case 1:LCD12864_command(0x7f + line);
break;
case 2:LCD12864_command(0x8f + line);
break;
case 3:LCD12864_command(0x87 + line);
break;
case 4:LCD12864_command(0x97 + line);
default:
break;
}
}
/*******************************************************************/
// 在指定位置顯示字符串
/*******************************************************************/
void LCD12864_string(unsigned char row,unsigned char line,unsigned char *s)
{
unsigned char LCD12864_temp;
LCD12864_address(row,line);
LCD12864_temp=*s;
while(LCD12864_temp != 0x00)
{
LCD12864_data(LCD12864_temp);
LCD12864_temp=*(++s);
}
}
/********************************************************************/
void Delay_100xuS(uint x) //
{
unsigned int i,j;
for( i =0;i < x;i++ )
{
for( j =0;j<9;j++ );
}
}
/*******************************************************************/
// 初始化設置
/*******************************************************************/
void LCD12864_init(void)
{
CLERADISPLAY // clear DDRAM
LCD12864_command(0x30); // 8 bits unsigned interface,basic instrument
LCD12864_command(0x02); // cursor return
LCD12864_command(0x0c); // display,cursor on
LCD12864_command(0x03);
LCD12864_command(0x06);
CLERADISPLAY // clear DDRAM
}
void Mcu_init(void)
{
LCD12864_init();
CLERADISPLAY
CLERADISPLAY
LCD12864_init();
}
//----------------------------------------------------LCD-------------------------------------
//--------------------------------------------------Menu----------------------------------
void MainMenu()
{
CLERADISPLAY
LCD12864_string(1,1,"1.菜單");
if(priceMod==0)
LCD12864_string(7,4,"白天");
if(priceMod==1)
LCD12864_string(7,4,"夜晚");
LCD12864_string(1,2,"2.開始計費");
LCD12864_string(1,3,"3.停止計費");
LCD12864_string(1,4,"4.收費模式");
}
void ListMenu()
{
CLERADISPLAY
LCD12864_string(1,1,"1.設置價格");
//if(feeMode==0)
LCD12864_string(1,2,"2.設置輪胎周長");
//if(feeMode==1)
LCD12864_string(1,4,"3.返回");
}
void SetPriceMenu()
{
CLERADISPLAY
if(setPriceMod==0)
LCD12864_string(1,1,"1.白天： 元");
if(setPriceMod==1)
LCD12864_string(1,1,"1.晚上： 元");
LCD12864_string(1,2,"2.++");
LCD12864_string(1,3,"3.--");
LCD12864_string(1,4,"4.完成");
}
void BillingMenu()
{
CLERADISPLAY
LCD12864_string(1,1,"行駛： 千米");
LCD12864_string(1,2,"單價： 元");
LCD12864_string(1,3,"總價： 元");
}
void SetWheelMenu()
{
CLERADISPLAY
LCD12864_string(1,1,"周長： 厘米");
LCD12864_string(1,2,"++");
LCD12864_string(1,3,"--");
LCD12864_string(1,4,"完成");
}
//--------------------------------------------------Menu----------------------------------
//--------------------------------------------------數據轉換------------------------------
void ChangeDayPrice()
{
uint tpDayPrice=dayPrice*10;
arr_dayPrice[0]=tpDayPrice/10+'0';
arr_dayPrice[1]='.';
arr_dayPrice[2]=tpDayPrice%10+'0';
}
void ChangeNightPrice()
{
uint tpNightPrice=nightPrice*10;
arr_nightPrice[0]=tpNightPrice/10+'0';
arr_nightPrice[1]='.';
arr_nightPrice[2]=tpNightPrice%10+'0';
}
void ChangeWheelPerimeter()
{
uint tpWheelPerimeter=wheelPerimeter;
arr_wheelPerimeter[0]=wheelPerimeter/100+'0';
arr_wheelPerimeter[1]=wheelPerimeter/10%10+'0';
arr_wheelPerimeter[2]=wheelPerimeter%10+'0';
}
void ChangeCircle()
{
uint tpCircle=circle;
arr_circle[0]=tpCircle/100+'0';
arr_circle[1]=tpCircle/100%10+'0';
arr_circle[2]=tpCircle%10+'0';
}
void ChangeDistance()
{}
void ChangeTotalCost()
{}
//---------------------------------------------------------------------------------------------
void Delay(void)
{
unsigned char i;
unsigned int j;
for(i=0;i<200;i++)
for(j=1000;j>0;j--);
}
jisuan()
{
juli[0]=a/10+'0';
juli[1]=a%10+'0';
}
void DelayM(unsigned int a)
{//延時函數 1MS/次
unsigned char i;
while( --a != 0)
{
for(i = 0; i < 125; i++); //一個 ; 表示空語句,CPU空轉。
} //i 從0加到125，CPU大概就耗時1毫秒
}
void ShowSetPrice()
{
uchar tpKEY=0;
SetPriceMenu();
ChangeDayPrice();
ChangeNightPrice();
if(setPriceMod==0)
{
LCD12864_string(6,1,arr_dayPrice);
}
else if(setPriceMod==1)
{
LCD12864_string(6,1,arr_nightPrice);
}
while(1)
{
if(KEY_1==0)
{
DelayM(20);
tpKEY=1;
while(KEY_1==0);
DelayM(20);
if(tpKEY==1)
{
if(setPriceMod==0)
{
LCD12864_string(1,1,"1.晚上");
LCD12864_string(6,1,arr_nightPrice);
setPriceMod=1;
}
else if(setPriceMod==1)
{
LCD12864_string(1,1,"1.白天");
LCD12864_string(6,1,arr_dayPrice);
setPriceMod=0;
}
tpKEY=0;
}
}
if(KEY_2==0)
{
DelayM(20);
tpKEY=1;
while(KEY_2==0);
DelayM(20);
if(tpKEY==1)
{
if(setPriceMod==0)
{
dayPrice+=0.1;
ChangeDayPrice();
LCD12864_string(6,1,arr_dayPrice);
}
else if(setPriceMod==1)
{
nightPrice+=0.1;
ChangeNightPrice();
LCD12864_string(6,1,arr_nightPrice);
}
}
tpKEY=0;
}
if(KEY_3==0)
{
DelayM(20);
tpKEY=1;
while(KEY_3==0);
DelayM(20);
if(tpKEY==1)
{
if(setPriceMod==0)
{
dayPrice-=0.1;
ChangeDayPrice();
LCD12864_string(6,1,arr_dayPrice);
}
else if(setPriceMod==1)
{
nightPrice-=0.1;
ChangeNightPrice();
LCD12864_string(6,1,arr_nightPrice);
}
}
tpKEY=0;
}
if(KEY_4==0)
{
DelayM(20);
CLERADISPLAY
return;
while(KEY_4==0);
DelayM(20);
}
}
}
void ShowSetWheel()
{
uchar tpKEY=0;
SetWheelMenu();
ChangeWheelPerimeter();
LCD12864_string(5,1,arr_wheelPerimeter);
while(1)
{
if(KEY_1==0)
{
DelayM(20);
tpKEY=1;
while(KEY_1==0);
DelayM(20);
if(tpKEY==1)
tpKEY=0;
}
if(KEY_2==0)
{
DelayM(20);
tpKEY=1;
while(KEY_2==0);
DelayM(20);
if(tpKEY==1)
{
wheelPerimeter++;
ChangeWheelPerimeter();
LCD12864_string(5,1,arr_wheelPerimeter);
}
tpKEY=0;
}
if(KEY_3==0)
{
DelayM(20);
tpKEY=1;
while(KEY_3==0);
DelayM(20);
if(tpKEY==1)
{
wheelPerimeter--;
ChangeWheelPerimeter();
LCD12864_string(5,1,arr_wheelPerimeter);
}
tpKEY=0;
}
if(KEY_4==0)
{
DelayM(20);
return;
while(KEY_4==0);
DelayM(20);
}
}
}
void ShowList()
{
uchar tpKEY;
ListMenu();
while(1)
{
if(KEY_1==0)
{
DelayM(20);
tpKEY=1;
while(KEY_1==0);
DelayM(20);
if(tpKEY==1)
ShowSetPrice(); //設置價格
}
if(KEY_2==0)
{
DelayM(20);
tpKEY=1;
while(KEY_2==0);
DelayM(20);
if(tpKEY==1)
ShowSetWheel(); //設置輪胎周長
tpKEY=0;
}
/* if(KEY_3==0)
{
DelayM(20);
reSet();
while(KEY_3==0);
DelayM(20);
} */
if(KEY_4==0)
{
DelayM(20);
tpKEY=1;
while(KEY_4==0);
DelayM(20);
if(tpKEY==1)
{
CLERADISPLAY
MainMenu();
tpKEY=0;
return;
}
}
}
}
void Billing()
{
uchar tpKEY=0;
BillingMenu();
while(1)
{
if(KEY_2==0)
{
DelayM(20);
tpKEY=1;
while(KEY_2==0);
DelayM(20);
if(tpKEY==1)
{
tpKEY=0;
MainMenu();
return;
}
}
}
}
void ReSet()
{}
void SetMod()
{
if(priceMod==0)
{
LCD12864_string(7,4,"夜晚");
priceMod=1;
}
else if(priceMod==1)
{
LCD12864_string(7,4,"白天");
priceMod=0;
}
}
void Inital()
{ }
void main()
{
Inital();
// uchar tpKEY;
Mcu_init();
CLERADISPLAY
MainMenu();
while(1)
{
if(KEY_1==0)
{
DelayM(20);
tpKEY=1;
while(KEY_1==0);
DelayM(20);
if(tpKEY==1)
{
ShowList();
tpKEY=0;
}
}
if(KEY_2==0)
{
DelayM(20);
tpKEY=1;
while(KEY_2==0);
DelayM(20);
if(tpKEY==1)
{
Billing();
tpKEY=0;
}
}
if(KEY_3==0)
{
DelayM(20);
// reSet();
while(KEY_3==0);
DelayM(20);
}
if(KEY_4==0)
{
DelayM(20);
tpKEY=1;
while(KEY_4==0);
DelayM(20);
if(tpKEY==1)
{
SetMod();
tpKEY=0;
}
}
//菜單
//計費 再按停止計費
//復位 ，系統復位（長按）
//白天模式（默認），晚上模式（按）
}
}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -