// Reverb model tuning values//// Written by Jezar at Dreampoint, June 2000// http://www.dreampoint.co.uk// This code is public domain#ifndef _tuning_#define _tuning_const int   numcombs         = 8;const int   numallpasses     = 4;const float muted            = 0;const float fixedgain        = 0.005f;const float scalewet         = 3;const float scaledry         = 2;const float scaledamp        = 0.4f;const float scaleroom        = 0.28f;const float offsetroom       = 0.7f;const float initialroom      = 0.5f;const float initialdamp      = 0.5f;const float initialwet       = 1/scalewet;const float initialdry       = 0;const float initialwidth     = 1;const float initialmode      = 0;const float freezemode       = 0.5f;const int   stereospread     = 23;// These values assume 44.1KHz sample rate// they will probably be OK for 48KHz sample rate// but would need scaling for 96KHz (or other) sample rates.// The values were obtained by listening tests.const int combtuningL1       = 1116;const int combtuningR1       = 1116+stereospread;const int combtuningL2       = 1188;const int combtuningR2       = 1188+stereospread;const int combtuningL3       = 1277;const int combtuningR3       = 1277+stereospread;const int combtuningL4       = 1356;const int combtuningR4       = 1356+stereospread;const int combtuningL5       = 1422;const int combtuningR5       = 1422+stereospread;const int combtuningL6       = 1491;const int combtuningR6       = 1491+stereospread;const int combtuningL7       = 1557;const int combtuningR7       = 1557+stereospread;const int combtuningL8       = 1617;const int combtuningR8       = 1617+stereospread;const int allpasstuningL1    = 556;const int allpasstuningR1    = 556+stereospread;const int allpasstuningL2    = 441;const int allpasstuningR2    = 441+stereospread;const int allpasstuningL3    = 341;const int allpasstuningR3    = 341+stereospread;const int allpasstuningL4    = 225;const int allpasstuningR4    = 225+stereospread;#endif//_tuning_//ends